Oxidative photopolymerization of thiol-terminated polysulfide resins. Application in antibacterial coatings

A UV photoinduced cross-linking of non-modified commercial poly(disulfide) resins (Thioplast) is reported via the air oxidative photocoupling of terminal thiol functions. Catalyzed by a photogenerated guanidine base (TBD), this step-growth photopolymerization is useful to maximize disulfide functions content. The mechanism proceeds through thiol deprotonation into thiolate anions, further oxidized into thiyl radicals, eventually dimerizing into disulfide cross-links. Starting with a detailed structural characterization of the thiol-terminated resin, photooxidative kinetics are studied under exposure to a polychromatic medium-pressure Hg arc using Raman and infrared spectroscopy. The effects of irradiance, film thickness, photobase concentration, resin molar mass, and content of an additional polythiol monomer (reactive diluent) have been investigated. In an effort of upscaling, irradiation under a 365 nm LED panel has enabled the fast preparation of 1.5 μm thick cross-linked poly(disulfide) coatings in a matter of minutes. Capitalizing on the ability of residual thiol groups to react with silver cations, a post-functionalization has been successfully performed, leading to films exhibiting at their surface stable thiolate-silver bonds as proved by X-ray photoelectron spectroscopy. Despite the well-established biocide action of silver ions, no antibacterial action has been evidenced by confocal fluorescence microscopy because of insufficient release

Low CCR7-Mediated Migration of Human Monocyte Derived Dendritic Cells in Response to Human Respiratory Syncytial Virus and Human Metapneumovirus

Human respiratory syncytial virus (HRSV) and, to a lesser extent, human metapneumovirus (HMPV) and human parainfluenza virus type 3 (HPIV3), can re-infect symptomatically throughout life without significant antigenic change, suggestive of incomplete or short-lived immunity. In contrast, re-infection by influenza A virus (IAV) largely depends on antigenic change, suggestive of more complete immunity. Antigen presentation by dendritic cells (DC) is critical in initiating the adaptive immune response. Antigen uptake by DC induces maturational changes that include decreased expression of the chemokine receptors CCR1, CCR2, and CCR5 that maintain DC residence in peripheral tissues, and increased expression of CCR7 that mediates the migration of antigen-bearing DC to lymphatic tissue. We stimulated human monocyte-derived DC (MDDC) with virus and found that, in contrast to HPIV3 and IAV, HMPV and HRSV did not efficiently decrease CCR1, 2, and 5 expression, and did not efficiently increase CCR7 expression. Consistent with the differences in CCR7 mRNA and protein expression, MDDC stimulated with HRSV or HMPV migrated less efficiently to the CCR7 ligand CCL19 than did IAV-stimulated MDDC. Using GFP-expressing recombinant virus, we showed that the subpopulation of MDDC that was robustly infected with HRSV was particularly inefficient in chemokine receptor modulation. HMPV- or HRSV-stimulated MDDC responded to secondary stimulation with bacterial lipopolysaccharide or with a cocktail of proinflammatory cytokines by increasing CCR7 and decreasing CCR1, 2 and 5 expression, and by more efficient migration to CCL19, suggesting that HMPV and HRSV suboptimally stimulate rather than irreversibly inhibit MDDC migration. This also suggests that the low concentration of proinflammatory cytokines released from HRSV- and HMPV-stimulated MDDC is partly responsible for the low CCR7-mediated migration. We propose that inefficient migration of HRSV- and HMPV-stimulated DC to lymphatic tissue contributes to reduced adaptive responses to these viruses

Different Domains of the RNA Polymerase of Infectious Bursal Disease Virus Contribute to Virulence

BACKGROUND: Infectious bursal disease virus (IBDV) is a pathogen of worldwide significance to the poultry industry. IBDV has a bi-segmented double-stranded RNA genome. Segments A and B encode the capsid, ribonucleoprotein and non-structural proteins, or the virus polymerase (RdRp), respectively. Since the late eighties, very virulent (vv) IBDV strains have emerged in Europe inducing up to 60% mortality. Although some progress has been made in understanding the molecular biology of IBDV, the molecular basis for the pathogenicity of vvIBDV is still not fully understood. METHODOLOGY, PRINCIPAL FINDINGS: Strain 88180 belongs to a lineage of pathogenic IBDV phylogenetically related to vvIBDV. By reverse genetics, we rescued a molecular clone (mc88180), as pathogenic as its parent strain. To study the molecular basis for 88180 pathogenicity, we constructed and characterized in vivo reassortant or mosaic recombinant viruses derived from the 88180 and the attenuated Cu-1 IBDV strains. The reassortant virus rescued from segments A of 88180 (A88) and B of Cu-1 (BCU1) was milder than mc88180 showing that segment B is involved in 88180 pathogenicity. Next, the exchange of different regions of BCU1 with their counterparts in B88 in association with A88 did not fully restore a virulence equivalent to mc88180. This demonstrated that several regions if not the whole B88 are essential for the in vivo pathogenicity of 88180. CONCLUSION, SIGNIFICANCE: The present results show that different domains of the RdRp, are essential for the in vivo pathogenicity of IBDV, independently of the replication efficiency of the mosaic viruses

A comparative study of the sorption of O-PAHs and PAHs onto soils to understand their transport in soils and groundwater

International audiencePolycyclic aromatic hydrocarbons (PAHs) and their oxygenated derivates (O-PAHs) are identified in soils and groundwater of industrialized sites and contribute to the risk for Humans and the Environment. Nevertheless, data are scarce in literature concerning their retention and transfer in soils and no soil - water partition coefficients are available for these compounds. Sorption of two PAHs, fluorene and acenaphthene and two O-PAHs, 9H-fluorenone and dibenzofuran onto two soils with different organic carbon contents was evaluated and compared by determining their sorption isotherms. Effect of ionic strength and liquid to solid ratio, on fluorene and fluorenone sorption was also evaluated. Sorption equilibrium is achieved within less than 24 hr of mixing and linear sorption models best fit the isotherm data. Acenaphthene and dibenzofuran are similarly sorbed onto the soil. KD of fluorene is higher than the one of fluorenone, showing a smaller affinity of fluorenone towards the solid phase. This means that O-PAH could form larger contamination plumes in groundwater than PAHs. Decreasing the L/S ratio from 100 to 50 and 30, increases the sorption of fluorenone onto the soil by 56% and 67% respectively, while the sorption of fluorene is slightly increased. Increasing the ionic strength of the aqueous phase also modifies the sorption of fluorenone, contrary to the sorption of fluorene which is slightly affected

Aerobic Baeyer–Villiger Oxidation Catalyzed by a Flavin-Containing Enzyme Mimic in Water

Direct incorporation of molecular oxygen into small organic molecules has attracted much attention for the development of new environmentally friendly oxidation processes. In line with this approach, bioinspired systems mimicking enzyme activities are of particular interest since they may perform catalysis in aqueous media. Demonstrated herein is the incorporation of a natural flavin cofactor (FMN) into the specific microenvironment of a water-soluble polymer which allows the efficient reduction of the FMN by NADH in aqueous solution. Once reduced, this artificial flavoenzyme can then activate molecular dioxygen under aerobic conditions and result in the Baeyer–Villiger reaction at room temperature in water

Development of a Liquid/Liquid Extraction Method and GC/MS Analysis Dedicated to the Quantitative Analysis of PAHs and O-PACs in Groundwater from Contaminated Sites and Soils

International audienceA liquid/liquid extraction method coupled with a GC/MS analysis was optimized to quantify 27 polycyclic aromatic compounds in groundwater from contaminated sites. The aim was to optimize an analytical method to determine Polycyclic Aromatic Hydrocarbons (PAH) and Oxygenated Polycyclic Aromatic Compounds (O-PACs) in water and for apply the method to ground water samples collected from contaminated sites. The analysis takes place in one run, including dissolved as well as colloid and particle-associated compounds. Artificially contaminated waters were prepared with two concentration ranges from 0.01 to 1 mu g L-1 and 0.5 to 50 mu g L-1. This method proceeds with two main steps. The first step is a liquid/liquid extraction with dichloromethane followed by a concentration procedure. The second step is the injection for separation and quantification in a gas chromatograph coupled with a mass spectrometer. The novelty of this work concerns the control of each step by the introduction of deuterated standards in order in order to estimate the recoveries during the extraction, concentration and injection in the process as well as the possibility of quantifying PAC total concentrations in water. This method leads to very good quantification limits ranging from 1 to 60 ng L-1 for PAHs and from 10 to 1,200 ng L-1 for O-PACs, respectively. High sensitivity has been achieved with some of the PAHs with a good R (2) factor higher than 0.994 in the concentration range 0.01 to 1 mu L-1

Modification of tannin based rigid foams using oligomers of a hyperbranched poly(amine-ester)

International audienceTannin-based rigid foam is an excellent alternative for other commercial foams due to price advantage, excellent fire resistance and low thermal conductivity. However, expanding its usability is restricted by its corresponding inferior mechanical properties. In the current work, we proposed a novel modification method which markedly improved its mechanical properties with respect to other approaches. The novel modification depends on boosting the foam network structure by adding oligomeric precursors (hydroxyl-terminated) of a hyperbranched poly (amine-ester) together with glutaraldehyde (crosslinker) as parts of the formulation where it was found that the compressive strength elevated remarkably and reached maximum of 37 % with respect to conventional formulation in absence of these additives or in presence of either of these additives alone. The novel modification method may show promise to obtain such materials for lower price under optimized conditions with respect to other reported modifiers due to the huge functionality of a hyperbranched polymer

Study on the sorption of Oxygenated Polycyclic Aromatic Compounds onto soil: towards a better human health risk-oriented remediation of PAH-contaminated sites

International audienc

Photoinduced Cross-Linking of Dynamic Poly(disulfide) Films via Thiol Oxidative Coupling

Initially developed as an elastomer with an excellent record of barrier and chemical resistance properties, poly(disulfide) has experienced a revival linked to the dynamic nature of the S–S covalent bond. A novel photobase-catalyzed oxidative polymerization of multifunctional thiols to poly(disulfide) network is reported. Based solely on air oxidation, the single-step process is triggered by the photodecarboxylation of a xanthone acetic acid liberating a strong bicyclic guanidine base. Starting with a 1 μm thick film based on trithiol poly(ethylene oxide) oligomer, the UV-mediated oxidation of thiols to disulfides occurs in a matter of minutes both selectively, i.e., without overoxidation, and quantitatively as assessed by a range of spectroscopic techniques. Thiolate formation and film thickness determine the reaction rates and yield. Spatial control of the photopolymerization serves to generate robust micropatterns, while the reductive cleavage of S–S bridges allows the recycling of 40% of the initial thiol groups