3 research outputs found

    Low-pressure gas chromatography with chemical ionization mass spectrometry for quantification of multifunctional organic compounds in the atmosphere

    Get PDF
    Oxygenated volatile organic compounds (OVOCs) are formed during the oxidation of gas-phase hydrocarbons in the atmosphere. However, analytical challenges have hampered ambient measurements for many of these species, leaving unanswered questions regarding their atmospheric fate. We present the development of an in situ gas chromatography (GC) technique that, when combined with the sensitive and specific detection of chemical ionization mass spectrometry (CIMS), is capable of the isomer-resolved detection of a wide range of OVOCs. The instrument addresses many of the issues typically associated with chromatographic separation of such compounds (e.g., analyte degradation). The performance of the instrumentation is assessed through data obtained in the laboratory and during two field studies. We show that this instrument is able to successfully measure otherwise difficult-to-quantify compounds (e.g., organic hydroperoxides and organic nitrates) and observe the diurnal variations in a number of their isomers.</p

    Simulations of atmospheric OH, O-3 and NO3 reactivities within and above the boreal forest

    Get PDF
    Using the 1-D atmospheric chemistry transport model SOSAA, we have investigated the atmospheric reactivity of a boreal forest ecosystem during the HUMPPA-COPEC-10 campaign (summer 2010, at SMEAR II in southern Finland). For the very first time, we present vertically resolved model simulations of the NO3 and O-3 reactivity (R) together with the modelled and measured reactivity of OH. We find that OH is the most reactive oxidant (R similar to 3 s(-1)) followed by NO3 (R similar to 0.07 s(-1)) and O-3 (R similar to 2 x 10 5 s(-1)). The missing OH reactivity was found to be large in accordance with measurements (similar to 65 %) as would be expected from the chemical subset described in the model. The accounted OH radical sinks were inorganic compounds (similar to 41 %, mainly due to reaction with CO), emitted monoterpenes (similar to 14 %) and oxidised biogenic volatile organic compounds (similar to 44 %). The missing reactivity is expected to be due to unknown biogenic volatile organic compounds and their photoproducts, indicating that the true main sink of OH is not expected to be inorganic compounds. The NO3 radical was found to react mainly with primary emitted monoterpenes (similar to 60 %) and inorganic compounds (similar to 37 %, including NO2). NO2 is, however, only a temporary sink of NO3 under the conditions of the campaign (with typical temperatures of 20-25 degrees C) and does not affect the NO3 concentration. We discuss the difference between instantaneous and steady-state reactivity and present the first boreal forest steady-state lifetime of NO3 (113 s). O-3 almost exclusively reacts with inorganic compounds (similar to 91 %, mainly NO, but also NO2 during night) and less with primary emitted sesquiterpenes (similar to 6 %) and monoterpenes (similar to 3 %). When considering the concentration of the oxidants investigated, we find that OH is the oxidant that is capable of removing organic compounds at a faster rate during daytime, whereas NO3 can remove organic molecules at a faster rate during night-time. O-3 competes with OH and NO3 during a short period of time in the early morning (around 5 a.m. local time) and in the evening (around 7-8 p.m.). As part of this study, we developed a simple empirical parameterisation for conversion of measured spectral irradiance into actinic flux. Further, the meteorological conditions were evaluated using radiosonde observations and ground-based measurements. The overall vertical structure of the boundary layer is discussed, together with validation of the surface energy balance and turbulent fluxes. The sensible heat and momentum fluxes above the canopy were on average overestimated, while the latent heat flux was un-derestimated.Peer reviewe

    Semiconductor Nanowire Fabrication by Bottom-Up and Top-Down Paradigms

    No full text
    corecore