Comparison of the measured atmospheric muon rate with Monte Carlo simulations and sensitivity study for detection of prompt atmospheric muons with KM3NeT

The KM3NeT Collaboration has successfully deployed the first detection units of the next genera- tion undersea neutrino telescopes in the Mediterranean Sea at the two sites in Italy and in France. The data sample collected between December 2016 and January 2020 has been used to measure the atmospheric muon rate at two different depths under the sea level: 3.5 km with KM3NeT- ARCA and 2.5 km with KM3NeT-ORCA. Atmospheric muons represent an abundant signal in a neutrino telescope and can be used to test the reliability of the Monte Carlo simulation chain and to study the physics of extensive air showers caused by highly-energetic primary nuclei impinging the Earth’s atmosphere. At energies above PeV the contribution from prompt muons, created right after the first interaction in the shower, is expected to become dominant, however its existence has not yet been experimentally confirmed. In this talk, data collected with the first detection units of KM3NeT are compared to Monte Carlo simulations based on MUPAGE and CORSIKA codes. The main features of the simulation and reconstruction chains are presented. Additionally, the first results of the simulated signal from the prompt muon component for KM3NeT-ARCA and KM3NeT-ORCA obtained with CORSIKA are discussed

First neutrino oscillation measurement in KM3NeT/ORCA

The KM3NeT/ORCA is a next-generation neutrino detector currently under construction in the Mediterranean Sea. There are currently 6 Detection Units deployed, and in the past year the detector has been steadily taking data. Here the first neutrino oscillation measurement is presented using data taken with the ORCA detector 6 Detection Units, containing 354.6 days of exposure. Selection criteria are discussed, followed by a neutrino oscillation analysis. In the analysis it is found that oscillations are preferred with a confidence level of 5.9 σ over "no oscillations". Likelihood scans of the Δm231 and sin2θ23 parameter also show a strong exclusion of the no oscillation hypothesis. The sensitivity contour in (sin2θ23,Δm231) is presented, showing results that are approaching to being being competitive with other experiments

KM3NeT Detection Unit Line Fit reconstruction using positioning sensors data

The KM3NeT collaboration is constructing two large neutrino detectors in the Mediterranean Sea: KM3NeT/ARCA, located near Sicily and aiming at neutrino astronomy, and KM3NeT/ORCA, located near Toulon and designed for neutrino oscillation studies. The two detectors, together, will have hundreds of Detection Units (DUs) with 18 Digital Optical Modules (DOMs) maintained vertical by buoyancy, forming a large 3D optical array for detecting the Cherenkov light produced by particle produced in neutrino interactions. To properly reconstruct the direction of the incoming neutrino, the position of the DOMs must be known precisely with an accuracy of less than 10 cm, and since the DUs are affected by sea current the position will be measured every 10 minutes. For this purpose, there are acoustic and orientation sensors inside the DOMs. An Attitude Heading Reference System (AHRS) chip provides the components values of the Acceleration and Magnetic field in the DOM, from which it is possible to calculate Yaw, Pitch, and Roll for each floor of the line. A piezo sensor detects the signals from fixed acoustic emitters on the sea floor, so to position it by trilateration. Data from these sensors are used as an input to reconstruct the shape of the entire line based on a DU Line Fit mechanical model. This poster presents an overview of the KM3NeT monitoring system, as well as the line fit model and its results

The Power Board of the KM3NeT Digital Optical Module: Design, Upgrade, and Production

The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea, consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three-inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure- resistant glass sphere. The module also includes calibration instruments and electronics for power, readout, and data acquisition. The power board was developed to supply power to all the elements of the digital optical module. The design of the power board began in 2013, and ten prototypes were produced and tested. After an exhaustive validation process in various laboratories within the KM3NeT Collaboration, a mass production batch began, resulting in the construction of over 1200 power boards so far. These boards were integrated in the digital optical modules that have already been produced and deployed, which total 828 as of October 2023. In 2017, an upgrade of the power board, to increase reliability and efficiency, was initiated. The validation of a pre-production series has been completed, and a production batch of 800 upgraded boards is currently underway. This paper describes the design, architecture, upgrade, validation, and production of the power board, including the reliability studies and tests conducted to ensure safe operation at the bottom of the Mediterranean Sea throughout the observatory’s lifespan

Indirect dark matter searches with neutrinos from the Galactic Centre region with the ANTARES and KM3NeT telescopes

An anomalous flux of neutrinos produced in hypothetical annihilations or decays of dark matter inside a source would produce a signal observable with neutrino telescopes. As suggested by observations, a conspicuous amount of dark matter is believed to accumulate in the centre of our Galaxy, which is in neat visibility for the Mediterranean underwater telescopes ANTARES and KM3NeT. Searches have been conducted with a maximum likelihood method to identify the presence of a dark matter signature in the neutrino flux measured by ANTARES. Results of all-flavour searches for WIMPs with masses from 50 GeV/c2 up to 100 TeV/c2 over the whole operation period from 2007 to 2020 are presented here. Alternative scenarios which propose a dark matter candidate in the heavy sector extensions of the Standard Model would produce a clear signature in the ANTARES telescope, that can exploit its view of the Galactic Centre up to high energies. The presentation of Galactic Centre searches is completed with ongoing analyses and future potential of the KM3NeT telescope, in phased construction in the Mediterranean Sea

Search for nuclearites with the KM3NeT detector

Strange quark matter (SQM) is a hypothetical type of matter composed of almost equal quantities of up, down and strange quarks. In [1], Edward Witten presented the SQM as a denser and more stable matter that could represent the ground state of Quantum Chromodynamics (QCD). Massive SQM particles are called nuclearites. These particles could have been produced in violent astrophysical processes, such as neutron star collisions and could be present in the cosmic radiation. Nuclearites with masses greater than 1013 GeV and velocities of about 250 km/s (typical galactic velocities) could reach the Earth and interact with atoms and molecules of sea water within the sensitive volume of the deep-sea neutrino telescopes. The SQM particles can be detected with the KM3NeT telescope (whose first lines are already installed and taking data in the Mediterranean Sea) through the visible blackbody radiation generated along their path inside or near the instrumented area. In this work the results of a study using Monte Carlo simulations of down-going nuclearites are discussed

KM3NeT/ARCA sensitivity to transient neutrino sources

The KM3NeT Collaboration is constructing a km3-volume neutrino telescope in the Mediterranean sea, ARCA (Astroparticle Research with Cosmics in the Abyss), for the detection and subsequent study of high-energy cosmic neutrinos.This telescope will be able to reconstruct the arrival direction of the neutrinos with a precision of ~0.1 degrees. The configuration of ARCA makes it sensitive to neutrinos in a wide energy range, from sub-TeV up to tens of PeV. Moreover, this detector has a large field of view and a very high duty cycle, allowing a full-sky (and all-flavours) searches. All these features make ARCA an excellent candidate to study transient neutrino sources. Atmospheric muons and neutrinos, produced by primary cosmic rays, constitute the main background for ARCA. This background can be several orders of magnitude higher than the expected cosmic neutrino flux. In this work, we introduce an event selection which reduces the background up to a negligible level inside the region of interest and within the search time window. The ARCA performance to detect a transient neutrino flux, including the effective area, sensitivity and discovery potential, are provided for a given test source, and for different time windows

The Calibration Units of KM3NeT

KM3NeT is a deep-sea infrastructure composed of two neutrino telescopes being deployed in the Mediterranean Sea : ARCA, near Sicily in Italy, designed for neutrino astronomy and ORCA, near Toulon in France, designed for neutrino oscillations. These two telescopes are 3D arrays of optical modules used to detect the Cherenkov radiation, which is a signature of charged particles created in the neutrino interaction and propagating faster than light in the sea water. To achieve the best performance for the event reconstruction in the telescopes, the exact location of the optical modules, affected by the sea current, must be known at any time and the timing resolution between optical modules must reach the nanosecond level. Moreover, the properties of the environment, in which the telescopes are deployed, such as temperature and salinity, are continuously monitored to allow best modelling of the acoustic signal propagation in the water. KM3NeT is going to deploy several dedicated Calibration Units hosting instruments dedicated to meet these calibration goals. The Calibration Base will host a Laser Beacon for time calibration and a long-baseline acoustic emitter and a hydrophone, which are part of the positioning system for the optical modules. Some of these Calibration Units will also be equipped with an Instrumentation Unit hosting environmental monitoring instruments. This poster describes all the devices, features and purposes of the Calibration Units, with a special emphasis on the first such unit that will be deployed on the ORCA site in 2021