Hydrostatic Vibratory Drive of the Test Stand for Excitation of the Amplitude-Modulated Vibrations

The article reviews the problems arising during the development of the test stand hydrostatic vibratory drive, which synthesize controlled amplitude-modulated vibrations required testing of vibration strength and vibrostability of technological devices. The newly developed modification can adequately simulate the transport vibration and vibration of the operating power-supply units of technological machinery vibration by means of implementing of a continuous frequency spectrum of the vibration exposure in the desired frequency range

Radial-piston pump for drive of test machines

The article reviews the development of radial-piston pump with phase control and alternating-flow mode for seismic-testing platforms and other test machines. The prospects for use of the developed device are proved. It is noted that the method of frequency modulation with the detection of the natural frequencies is easily realized by using the radial-piston pump. The prospects of further research are given proof

Radial-piston pump for drive of test machines

The article reviews the development of radial-piston pump with phase control and alternating-flow mode for seismic-testing platforms and other test machines. The prospects for use of the developed device are proved. It is noted that the method of frequency modulation with the detection of the natural frequencies is easily realized by using the radial-piston pump. The prospects of further research are given proof

Pneumatic device of the preload and dynamic loads balancing to reduce the intensity of thermal processes in the metal cutting process

Improved reliability of the technological system "machine-tool-instrument-detail" is an important current task. Backlashes and insufficient stiffness of technological system lead to intensive wear of the cutting tool, increasing the heat in the cutting zone. Due to high temperature in the thin surface layers of the workpiece and tool thermal processes may occur which are similar to release and can cause the structural changes of the material. The current article presents the final design of the device which has been developed to reduce the intensity of thermal processes in metal cutting

Physico-chemical Modification of the Fibrous Filter Nozzles for Purification Processes of Water and Air

A set of experiments to study physical and chemical modification of the surface of fibers is conducted to expand the area of their application for purification of water, gas and air (including that in conditions of space). The possibility of modification of filter nozzles in the process of fiber formation by particles of coal of BAU type, copper sulfide and silver chloride is experimentally shown. The fraction of the copper sulfide powder less than 50 microns in size was crushed in a spherical mill; it was deposited on fiber at air temperature of 50° C and powder consumption of 0.5 g/l of air. The resulting material contained 6–18 CuS particles per 1 cm of the fiber length. An effective bactericidal fibrous material can be produced using rather cheap material – CuS and relatively cheap natural compounds of sulphides and oxides of heavy metals