Fiber generators in needleless electrospinning

The conventional electrospinning often uses a needle-like nozzle to produce nanofibers with a very low production rate. Despite the enormous application potential, needle electrospun nanofibers meet difficulties in broad applications in practice, due to the lack of an economic and efficient way to scale up the electrospinning process. Recently, needleless electrospinning has emerged as a new electrospinning mode and shown ability to produce nanofibers on large-scales. It has been established that the fiber generator, also referred to as &ldquo;spinneret&rdquo; in this paper, in needleless electrospinning plays a key role in scaling up the nanofiber production. This paper summarizes the recent advances in the development of needleless spinnerets and their influences on electrospinning process, nanofiber quality, and productivity.<br /

Needleless-electrospinning of PVA nanofibres

In this paper, we demonstrated that a thin metal disk can be used as nozzle to electrospin PVA nanofibres on a large-scale. With the rotation of a disk covered with a thin layer of electrically charged PVA solution, a large number of fibres were electrospun simultaneously from two sides of the disk and deposited on the electrode collector. The fibre production rate can be as high as 6.0 glhr, which is about 270 times higher than that of a corresponding normal needle based electrospinning system (0.022 g/hr). The effects of applied voltage, the distance between the disk nozzle and collector, and PVA concentration on the fibre morphology were examined. The dependency of fibre diameter on the PV A concentration showed a similar trend to that for a conventional electrospinning system using a syringe needle nozzle, but the diameter distribution was slightly wider for the disk electrospun fibres. The profiles of electric field strength in disk electrospinning showed considerable dependence on the disk thickness, with a thin disk exhibiting similar electric field strength profile to that of a needle electrospinning system.<br /

Needleless electrospinning : influences of fibre generator geometry

The fibre generator shape and dimension are key factors affecting the needleless electrospinning process and fibre fineness. In this work, cylinder with rounded rim, disc and ball were used as spinnerets to electrospin polyvinyl alcohol and polyacrylonitrile solutions. A finite element method was used to analyse how the spinneret geometry affected the electric field generated during electrospinning and the associated changes in fibre diameter and productivity. For cylinder spinnerets, increasing the rim radius reduced the discrepancy of electric field intensity between the cylinder end and middle area, which affected the fibre productivity. The electrospinning failed to operate when the rim radius was over 20&thinsp;mm. With decreasing cylinder diameter, the electric field intensity in the middle area increased, improving the fibre productivity. Thinner disc spinnerets increased the electric field intensity, resulting in finer nanofibres and higher productivities. Ball spinnerets produced evenly distributed electric field, but failed to electrospin fibres when the diameters were below 60&thinsp;mm. It has been found that strong and narrowly distributed electric field in the fibre-generating area can significantly facilitate the mass production of quality nanofibres.<br /

Needleless electrospinning : developments and performances

Electrospinning technique has attracted a lot of interests recently, although it was invented in as early as 1934 by Anton (Anton, 1934). A basic electrospinning setup normally comprises a high voltage power supply, a syringe needle connected to power supply, and a counter-electrode collector as shown in Fig. 1. During electrospinning, a high electric voltage is applied to the polymer solution, which highly electrifies the solution droplet at the needle tip (Li &amp; Xia, 2004). As a result, the solution droplet at the needle tip receives electric forces, drawing itself toward the opposite electrode, thus deforming into a conical shape (also known as &ldquo;Taylor cone&rdquo; (Taylor, 1969)). When the electric force overcomes the surface tension of the polymer solution, the polymer solution ejects off the tip of the &ldquo;Taylor cone&rdquo; to form a polymer jet. The charged jet is stretched by the strong electric force into a fine filament. Randomly deposited dry fibers can be obtained on the collector due to the evaporation of solvent in the filament. There are many factors affecting the electrospinning process and fiber properties, including polymer materials (e.g. polymer structure, molecular weight, solubility), solvent (e.g. boiling point, dielectric properties), solution properties (e.g. viscosity, concentration, conductivity, surface tension), operating conditions (e.g. applied voltage, collecting distance, flow rate), and ambient environment (e.g. temperature, gas environment, humidity)

Upward needleless electrospinning of nanofibers

Polyacrylonitrile (PAN) nanofibers were prepared by a needleless electrospinning method using three rotating fiber generators, cylinder, disc and coil. The effects of the spinneret shape on the electrospinning process and resultant fiber morphology were examined. The disc spinneret needed the lowest voltage to initiate fiber formation, followed by the coil and cylinder. Compared to cylinder, the disc and coil produced finer fibers with narrower diameter distribution. The productivity of a coil was 23 g/hr, which was much larger than that of the cylinder spinneret having the same length and diameter. Finite elementary method was used to analyze the electric field. Stronger electric field was found to be formed on disc and coil surface, which concentrated on the disc circumferential edge and coil wire surface, respectively. For cylinder, the high intensity electric field was mainly concentrated on the end area. Concentrated electric field on the fiber generating surface could be used to explain the better electrospinning performance of coil, which may form a new concept for designing needleless electrospinning spinnerets.<br /

Application and Prospect of Telesurgery: The Role of Artificial Intelligence

Remote surgery refers to a new surgical mode in which doctors operate on patients with the help of surgical robots, network technology, and virtual reality technology. These robots are located far away from patients. The remote surgical robot system integrates key technologies such as robot, communication technology, remote control technology, space mapping algorithm, and fault tolerance analysis. Apply a variety of emerging networking modes such as 5G, optical fiber private network, fusion network technology, and deterministic network to realize the motion of the subordinate surgical robot and the vision of the main knife, and ensure stable signal transmission and safe remote operation. The development and application of remote surgical robots has become a new trend, which helps to break the barriers of unbalanced regional medical resource allocation, promote the rational allocation of high-quality medical resources, and solve the telemedicine problems in special areas and special circumstances. The development prospect is broad. In the future, relying on the 5G network technology with high speed, low power consumption, and low latency, remote surgery can operate more efficiently and stably, and the surgical robot will also develop toward a more portable and flexible direction, so as to better serve patients

Superphobicity/philicity janus fabrics with Switchable, spontaneous, directional transport ability to water and oil fluids

Herein we demonstrate that switchable, spontaneous, directional-transport ability to both water and oil fluids can be created on fabric materials through wet-chemistry coating and successive UV irradiation treatment. When the fabric showed directional transport to a liquid, it prevented liquids of higher surface tension from penetration, but allowed liquids of lower surface tension to permeate, from either side. The directional transport ability can be switched from one fluid to another simply by heating the fabric at an elevated temperature and then re-irradiating the fabric with UV light for required period of time. By attaching liquid drops vertically upwards to a horizontally-laid fabric, we further demonstrated that this novel directional fluid transport was an automatic process driven by surface property alone, irrespective of gravity's effect. This novel fabric may be useful for development of “smart” textiles and functional membranes for various applications

Needleless electrospinning of uniform nanofibers using spiral coil spinnerets

Polyvinyl alcohol nanofibers were prepared by a needleless electrospinning technique using a rotating spiral wire coil as spinneret. The influences of coil dimension (e.g., coil length, coil diameter, spiral distance, and wire diameter) and operating parameters (e.g., applied voltage and spinning distance) on electrospinning process, nanofiber diameter, and fiber productivity were examined. It was found that the coil dimension had a considerable influence on the nanofiber production rate, but minor effect on the fiber diameter. The fiber production rate increased with the increased coil length or coil diameter, or the reduced spiral distance or wire diameter. Higher applied voltage or shorter collecting distance also improved the fiber production rate but had little influence on the fiber diameter. Compared with the conventional needle electrospinning, the coil electrospinning produced finer fibers with a narrower diameter distribution. A finite element method was used to analyze the electric field on the coil surface and in electrospinning zone. It was revealed that the high electric field intensity was concentrated on the coil surface, and the intensity was highly dependent on the coil dimension, which can be used to explain the electrospinning performances of coils. In addition, PAN nanofibers were prepared using the same needleless electrospinning technique to verify the improvement in productivity.<br /

Knowledge mapping and global trends in the field of low-intensity pulsed ultrasound and endocrine and metabolic diseases: a bibliometric and visual analysis from 2012 to 2022

BackgroundLow-intensity pulsed ultrasound (LIPUS) is a highly promising therapeutic method that has been widely used in rehabilitation, orthopedics, dentistry, urology, gynecology, and other multidisciplinary disease diagnoses and treatments. It has attracted extensive attention worldwide. However, there is currently a lack of comprehensive and systematic research on the current status and future development direction of the LIPUS field. Therefore, this study comprehensively analyzed LIPUS-related reports from the past decade using bibliometrics methods, and further conducted research specifically focusing on its application in endocrine and metabolic diseases.MethodsWe downloaded LIPUS literature from 2012 to 2022 reported in the Web of Science Core Collection Science Citation Index-Expanded and Social Sciences Citation Index, and used bibliometric analysis software such as VOSviewer and CiteSpace to execute the analysis and visualize the results.ResultsWe searched for 655 English articles published on LIPUS from 2012 to 2022. China had the highest number of published articles and collaborations between China and the United States were the closest in this field. Chongqing Medical University was the institution with the highest output, and ULTRASOUND IN MEDICINE AND BIOLOGY was the journal with the most related publications. In recent years, research on the molecular mechanisms of LIPUS has continued to deepen, and its clinical applications have also continued to expand. The application of LIPUS in major diseases such as oxidative stress, regeneration mechanism, and cancer is considered to be a future research direction, especially in the field of endocrinology and metabolism, where it has broad application value.ConclusionGlobal research on LIPUS is expected to continue to increase, and future research will focus on its mechanisms of action and clinical applications. This study comprehensively summarizes the current development status and global trends in the field of LIPUS, and its research progress in the field of endocrine and metabolic diseases, providing valuable reference for future research in this field

Autoreactive marginal zone B cells enter the follicles and interact with CD4+ T cells in lupus-prone mice

<p>Abstract</p> <p>Backgound</p> <p>Marginal zone B cells have been implicated in the production of autoantibodies in murine models of lupus. It has been suggested that they contribute to lupus immunopathogenesis through their enhanced effector functions and their repertoire that is biased toward autoreactive specificities. In the B6.NZM2410.<it>Sle.Sle2.Sle3 </it>(B6.TC) model of lupus, the majority of marginal zone B cells are located outside the marginal zone and inside the follicles. Genetic alterations of this strain have shown a correlation between autoimmune pathogenesis and the presence of intrafollicular marginal zone B cells. This study was designed first to strengthen our original observations and to determine how the marginal zone B cells from the lupus-prone mice respond to stimulations and interact with T cells.</p> <p>Results</p> <p>The intrafollicular location of B6.TC MZB cells starts before disease manifestations and puts MZB cells in direct contact with CD4⁺T cells. Two different autoreactive B cell receptor (BCR) transgenic models showed that the expression of the <it>Sle </it>susceptibility loci enhances the presence of MZB cells inside the follicles. <it>In vitro</it>, B6.TC MZB cells were better effectors than B6 MZB cells with enhanced proliferation and antibody (Ab) production, including anti-DNA Ab, in response to stimulation with TLR ligands, immune complexes or anti-CD40. Furthermore, B6.TC MZB and CD4⁺T cells showed a reciprocally enhanced activation, which indicated that their contacts inside B6.TC follicles have functional consequences that suggest an amplification loop between these two cell types.</p> <p>Conclusions</p> <p>These results showed that the NZM2410 susceptibility loci induce MZB cells to locate into the follicles, and that this breach of follicular exclusion occurs early in the development of the autoimmune pathogenesis. The enhanced responses to stimulation and increased effector functions of MZB cells from lupus-prone mice as compare to non-autoimmune MZB cells provide a mechanism by which the failure of MZB cell follicular exclusion contributes to the autoimmune process.</p