Properties of the amniotic membrane for potential use in tissue engineering

An important component of tissue engineering (TE) is the supporting matrix upon which cells and tissues grow, also known as the scaffold. Scaffolds must easily integrate with host tissue and provide an excellent environment for cell growth and differentiation. Most scaffold materials are naturally derived from mammalian tissues. The amniotic membrane (AM) is considered an important potential source for scaffolding material. The AM represents the innermost layer of the placenta and is composed of a single epithelial layer, a thick basement membrane and an avascular stroma. The special structure and biological viability of the AM allows it to be an ideal candidate for creating scaffolds used in TE. Epithelial cells derived from the AM have the advantages of stem cells, yet are a more suitable source of cells for TE than stem cells. The extracellular matrix components of the basement membrane of the AM create an almost native scaffold for cell seeding in TE. In addition, the AM has other biological properties important for TE, including anti-inflammatory, anti-microbial, anti-fibrosis, anti-scarring, as well as reasonable mechanical property and low immunogenicity. In this review, the various properties of the AM are discussed in light of their potential use for TE

Synthetic dye decolorization by three sources of fungal laccase

Decolorization of six synthetic dyes using three sources of fungal laccase with the origin of Aspergillus oryzae, Trametes versicolor, and Paraconiothyrium variabile was investigated. Among them, the enzyme from P. variabile was the most efficient which decolorized bromophenol blue (100%), commassie brilliant blue (91%), panseu-S (56%), Rimazol brilliant blue R (RBBR; 47%), Congo red (18.5%), and methylene blue (21.3%) after 3 h incubation in presence of hydroxybenzotriazole (HBT; 5 mM) as the laccase mediator. It was also observed that decolorization efficiency of all dyes was enhanced by increasing of HBT concentration from 0.1 mM to 5 mM. Laccase from A. oryzae was able to remove 53% of methylene blue and 26% of RBBR after 30 min incubation in absence of HBT, but the enzyme could not efficiently decolorize other dyes even in presence of 5 mM of HBT. In the case of laccase from T. versicolor, only RBBR was decolorized (93%) in absence of HBT after 3 h incubation. © 2012 Forootanfar et al.; licensee BioMed Central Ltd

In vitro plant regeneration from protocorms-like bodies (PLBs) and callus of Phalaenopsis gigantea (Epidendroideae: Orchidaceae)

Phalaenopsis, with long arching sprays of flowers, are among the most beautiful flowers in the world. Phalaenopsis is an important genus and one of the most popular epiphytic monopodial orchids, grown commercially for the production of cut flowers and potted plants. Most of them have different and interesting morphological characteristics which have different value to the breeders. Phalaenopsis gigantea is one of the most difficult to grow and has the potential of producing beautiful hybrids. An efficient and reproducible method for large-scale propagation of Ph. gigantea using leaf sections has been developed. Leaf sections from in vitro young plants were cultured on New Dogashima Medium (NDM) supplemented with cytokinins (6-Benzylaminopurine (BAP), Thidiazuron (TDZ), and Kinetin (KIN), each at 0.01, 0.1, 0.5 and 1.0 mg/L) alone and in combinations with (auxins a-naphthaleneacetic acid (NAA), at 0.01, 0.1, 0.5 and 1.0 mg/L). The explants developed calli and protocorm-like-bodies (PLBs) within 6 weeks of culture. Treatment TDZ in combination with auxins was found to be the best for the induction of callus and PLBs. In vitro regeneration of Ph. gigantea PLB was achieved by exposure to light and transferring to hormone free NDM solid medium.Key words: Phalaenopsis, PLBs, new Dogashima medium, regeneration

Isolation of keratinophilic fungi and aerobic actinomycetes from park soils in Gorgan, North of Iran

Background: Keratinophilic fungi are a group of fungi that colonize in various keratinous substrates and degrade them to the components with low molecular weight. This study was conducted to determine the prevalence of keratinophilic fungi and aerobic Actinomycetes in soil of city parks in Gorgan. Objectives: In this study, we surveyed the city park soils of Gorgan (a northern province of Iran) to determine the identities and diversity of soil aerobic Actinomycetes, keratinophilic and non-keratinophilic fungi. Materials and Methods: A total of 244 soil samples were collected from 22 diferent parks of Gorgan, North of Iran. The samples were collected from the superfcial layer with depth not exceeding than 0-10 cm in sterile polyethylene bags. We used hair bait technique for isolation keratinophilic fungi. The colonies identifed by macroscopic and microscopic characterization after slide culturing. Actinomycetes were isolated by antibiotic dilution methods and detected by using physiological tests such as Lysozyme, Casein, Xanthine, Hypoxanthine, Gelatin, Urea Broth, and modifed acid-fast stain. Results: Totally, 75 isolates of aerobic Actinomycetes were detected that Actinomadura madurae and Nocardia asteroides were the most prevalent strains, with 14.66 and 28% prevalence respectively. Microsporum gypseum was more frequent than other keratinophilic fungi (22.96%) and Aspergillus spp. was the most species of saprophyte fungi (15.92%). Conclusions: This study showed that the collected soil from studied areas was rich of keratinophilic fungi and Actinomycetes, therefore hygiene protocol should be taken to prevent the spread of pathogenic and saprophytes fungi in the environment of susceptible person. © 2013, Ahvaz Jundishapur University of Medical Sciences

Experimental study on the energy absorption capability of circular corrugated tubes under lateral loading and axial loading

A new type of energy absorber called an expansion joint (i.e. a corrugated tube) is examined in this research. Several experiments are performed on three types of thin-walled specimen, namely circular tubes, preformed corrugated tubes and complete corrugated tubes, to investigate the energy absorption of steel specimens under different conditions for quasi-static lateral loading and axial loading. For this purpose, some steel specimens were compressed between two rigid platens in the axial direction, and the other specimens were laterally compressed. The preformed corrugated tubes and the complete corrugated tubes were produced by the hydroforming method. In each geometrical group of specimens, several tubes, which have different wall thicknesses, different inner diameters and different lengths and which are either empty or filled with polyurethane foam, were tested. Experiments show that, for a lateral load, the specific absorbed energies of the complete corrugated tubes are higher than those of the corresponding preformed corrugated tubes and circular tubes with the same characteristics. Tests show that, under lateral loading, a complete corrugated tube with a thicker wall and a smaller diameter is the optimum energy absorber system. Therefore, when a circular tube transforms into the corrugated tube, a better energy absorber system with a higher capability is achieved under lateral loading. Also, experiments show that, under axial loading, simple circular tubes with no forming process have higher specific absorbed energies than corrugated tubes do. Corrugated specimens have more controllable plastic deformation and a more regular deformation mode than simple tubes have. Tests under axial loading illustrate that, when the preformed corrugated tubes are filled with polyurethane foam, the specific absorbed energy increases by up to 74%. A comparison of the results on empty and filled specimens shows that, in some cases, the specific absorbed energies of corrugated tubes under lateral loading are higher than the specific absorbed energies of circular tubes under axial loading. This means that, by shaping the circular tubes into preformed corrugated tubes and complete corrugated tubes via the hydroforming process, a new thin-walled structure with a high specific absorbed energy during the lateral compression process is introduced

Prevalence and new histopathological aspects of Haemoproteus spp. in pigeons from Iran

ΔΕΝ ΔΙΑΤΙΘΕΤΑΙ ΠΕΡΙΛΗΨΗHaemoproteus spp. is pathogenic protozoan that effecting blood circulatory system of birds. The present study was undertaken to evaluate the presence of Haemoproteus spp. in pigeons from Iran and associatedhistopathological changes. A total of 108 blood samples were taken from pigeons to investigate Haemoproteus spp. presence by blood smear and semi-nested PCR targeting the cytochrome b gene methods. Also, to evaluate histopathological changes 12 infected pigeons to Haemoproteus were sacrificed and studied. 34.2% of pigeons infected with Haemoproteus showed macro and microgametocytes in their erythrocytes while based on the molecular method 63.8% were infected. Focal lymphocytic aggregates, pigmentation and cell swelling were the main histopathological lesions in infected livers. Multifocal non- suppurative interstitial nephritis, pigmentation and splenic lymphoid hyperplasia were also seen in the infected pigeons. Mild lymphocytic myocarditis in the heart of one pigeon was the other finding. No histopathological changes were seen in brain, intestine, and pancreas. Schizonts with variable shapes and sizes were detected in infected livers, lungs, kidneys, and spleens but megaloschizonts were not found. This study also reports the molecular prevalence of Haemoproteus spp. in Ira

Molecular characterization and phylogenetic relationships among and within species of Phalaenopsis (Epidendroideae: Orchidaceae) based on RAPD analysis

Random amplified polymorphic DNA (RAPD) analysis for 20 species of Phalaenopsis was conducted to determine their genetic distances and relationships. Among 20 different primers used for RAPD analysis, 10 primers showed polymorphism, and according to the primer type, 26 to 54 DNA fragments were amplified. A total of 414 polymorphic fragments were generated by 10 primers and used for correlation group analysis. The highest value of Similarity index was 0.28 between Ph. violaceamalaysia and Ph. violacea witte. The dendrogram resulting from UPGMA (Unweighted Pair Group Method using Arithmetic average) hierarchical cluster analysis separated the original species into threegroups: The first group had five species of Ph. violacea blue, Ph. belina, Ph. violacea malaysia, Ph. violacea witte, and Ph. gigantea; the second group included Ph. lamelligera, Ph. amabilis, Ph. parishii, Ph. labbi nepal, Ph. speciosa, Ph. lobbi yellow, Ph. venosa, Ph. hieroglyphica, and Ph. maculata; the third group consisted of Ph. minho princess, Ph. leopard prince, Ph. mannii, Ph. modesta, Ph. cornucervi and Ph. pantherina. RAPD markers can thus be successfully applied in this economicallyimportant group of orchids for the study of molecular characterization and relationships. The data acquired from this study could be used for identification and classification of other orchid genera andoriental Phalaenopsis