2,581 research outputs found
Wireless Sensor Networks:A case study for Energy Efficient Environmental Monitoring
Energy efficiency is a key issue for wireless sensor networks, since sensors nodes can often be powered by non-renewable batteries. In this paper, we examine four MAC protocols in terms of energy consumption, throughput and energy efficiency. A forest fire detection application has been simulated using the well-known ns-2 in order to fully evaluate these protocols
Energy Harvesting and Management for Wireless Autonomous Sensors
Wireless autonomous sensors that harvest ambient energy are attractive solutions, due to their convenience and economic benefits. A number of wireless autonomous sensor platforms which consume less than 100?W under duty-cycled operation are available. Energy harvesting technology (including photovoltaics, vibration harvesters, and thermoelectrics) can be used to power autonomous sensors. A developed system is presented that uses a photovoltaic module to efficiently charge a supercapacitor, which in turn provides energy to a microcontroller-based autonomous sensing platform. The embedded software on the node is structured around a framework in which equal precedent is given to each aspect of the sensor node through the inclusion of distinct software stacks for energy management and sensor processing. This promotes structured and modular design, allowing for efficient code reuse and encourages the standardisation of interchangeable protocols
Energy managed reporting for wireless sensor networks
In this paper, we propose a technique to extend the network lifetime of a wireless sensor network, whereby each sensor node decides its individual network involvement based on its own energy resources and the information contained in each packet. The information content is ascertained through a system of rules describing prospective events in the sensed environment, and how important such events are. While the packets deemed most important are propagated by all sensor nodes, low importance packets are handled by only the nodes with high energy reserves. Results obtained from simulations depicting a wireless sensor network used to monitor pump temperature in an industrial environment have shown that a considerable increase in the network lifetime and network connectivity can be obtained. The results also show that when coupled with a form of energy harvesting, our technique can enable perpetual network operatio
Resource Aware Sensor Nodes in Wireless Sensor Networks
Wireless sensor networks are continuing to receive considerable research interest due, in part, to the range of possible applications. One of the greatest challenges facing researchers is in overcoming the limited network lifetime inherent in the small locally powered sensor nodes. In this paper, we propose IDEALS, a system to manage a wireless sensor network using a combination of information management, energy harvesting and energy monitoring, which we label resource awareness. Through this, IDEALS is able to extend the network lifetime for important messages, by controlling the degradation of the network to maximise information throughput
Flexible Integration of Alternative Energy Sources for Autonomous Sensing
Recent developments in energy harvesting and autonomous sensing mean that it is now possible to power sensors solely from energy harvested from the environment. Clearly this is dependent on sufficient environmental energy being present. The range of feasible environments for operation can be extended by combining multiple energy sources on a sensor node. The effective monitoring of their energy resources is also important to deliver sustained and effective operation. This paper outlines the issues concerned with combining and managing multiple energy sources on sensor nodes. This problem is approached from both a hardware and embedded software viewpoint. A complete system is described in which energy is harvested from both light and vibration, stored in a common energy store, and interrogated and managed by the node
Screen-printed potentiometric Ag/AgCl chloride sensors: Lifetime performance and their use in soil salt measurements
Silver – silver chloride electrodes (Ag/AgCl) for the detection of chloride ions were fabricated using thick-film technology. Five different formulations were prepared and chloride responses were investigated over time. Almost identical and near Nernstian responses were observed over the first 162 days with an average chloride sensitivity for all formulations of -51.12 mV ± 0.45 mV per decade change in chloride concentration compared with a value of -50.59 mV ± 0.01 mV over 388 days for the best two formulations. After 6-months continuous immersion in tap water, pastes formulated with a glass binder began to exhibit a loss in sensitivity whilst those formulated from a commercial thick-film dielectric paste remained functional for the best part of a year. This difference in lifetime performance is attributed to the inclusion of proprietary additives in the commercial paste aiding adhesion and minimising AgCl leaching. The mechanical and chemical robustness of these electrodes has been demonstrated through their ability to detect changing levels of chloride when immersed in soil columns. This particular capacity will make them an invaluable tool in the fields of hydrology, agricultural science, soil science and environmental science
A Structured Hardware/Software Architecture for Embedded Sensor Nodes
Owing to the limited requirement for sensor processing in early networked sensor nodes, embedded software was generally built around the communication stack. Modern sensor nodes have evolved to contain significant on-board functionality in addition to communications, including sensor processing, energy management, actuation and locationing. The embedded software for this functionality, however, is often implemented in the application layer of the communications stack, resulting in an unstructured, top-heavy and complex stack. In this paper, we propose an embedded system architecture to formally specify multiple interfaces on a sensor node. This architecture differs from existing solutions by providing a sensor node with multiple stacks (each stack implements a separate node function), all linked by a shared application layer. This establishes a structured platform for the formal design, specification and implementation of modern sensor and wireless sensor nodes. We describe a practical prototype of an intelligent sensing, energy-aware, sensor node that has been developed using this architecture, implementing stacks for communications, sensing and energy management. The structure and operation of the intelligent sensing and energy management stacks are described in detail. The proposed architecture promotes structured and modular design, allowing for efficient code reuse and being suitable for future generations of sensor nodes featuring interchangeable components
Obstructive sleep apnea and depression
There are high rates of depression in people with obstructive sleep apnea (OSA) in both community and clinical populations. A large community study reported a rate of 17% and reports for sleep clinic samples range between 21% and 41%. A large cohort study found OSA to be a risk factor for depression, but we are unaware of any longitudinal study of the reverse association. However correlations have not generally been found in smaller studies. Several possible causal mechanisms linking OSA and depression have been proposed but not established. Patients who have depression as well as OSA appear worse off than those with OSA only, and depressive symptoms persist in at least some patients in short term studies of treatment for OSA. Direct treatment of depression in OSA might improve acceptance of therapy, reduce sleepiness and fatigue and improve quality of life, but intervention trials are required to answer this question
Review on the development of truly portable and in-situ capillary electrophoresis systems
Capillary electrophoresis (CE) is a technique which uses an electric field to separate a mixed sample into its constituents. Portable CE systems enable this powerful analysis technique to be used in the field. Many of the challenges for portable systems are similar to those of autonomous in-situ analysis and therefore portable systems may be considered a stepping stone towards autonomous in-situ analysis. CE is widely used for biological and chemical analysis and example applications include: water quality analysis; drug development and quality control; proteomics and DNA analysis; counter-terrorism (explosive material identification) and corrosion monitoring. The technique is often limited to laboratory use, since it requires large electric fields, sensitive detection systems and fluidic control systems. All of these place restrictions in terms of: size, weight, cost, choice of operating solutions, choice of fabrication materials, electrical power and lifetime. In this review we bring together and critique the work by researchers addressing these issues. We emphasize the importance of a holistic approach for portable and in-situ CE systems and discuss all the aspects of the design. We identify gaps in the literature which require attention for the realization of both truly portable and in-situ CE systems
Garnet–monazite rare earth element relationships in sub-solidus metapelites: a case study from Bhutan
A key aim of modern metamorphic geochronology is to constrain precise and accurate rates and timescales of tectonic processes. One promising approach in amphibolite and granulite-facies rocks links the geochronological information recorded in zoned accessory phases such as monazite to the pressure–temperature information recorded in zoned major rock-forming minerals such as garnet. Both phases incorporate rare earth elements (REE) as they crystallize and their equilibrium partitioning behaviour potentially provides a useful way of linking time to temperature. We report REE data from sub-solidus amphibolite-facies metapelites from Bhutan, where overlapping ages, inclusion relationships and Gd/Lu ratios suggest that garnet and monazite co-crystallized. The garnet–monazite REE relationships in these samples show a steeper pattern across the heavy (H)REE than previously reported. The difference between our dataset and the previously reported data may be due to a temperature-dependence on the partition coefficients, disequilibrium in either dataset, differences in monazite chemistry or the presence or absence of a third phase that competed for the available REE during growth. We urge caution against using empirically-derived partition coefficients from natural samples as evidence for, or against, equilibrium of REE-bearing phases until monazite–garnet partitioning behaviour is better constrained
- …