8 research outputs found
Bedload composition, transport and modification in rivers of Westland, New Zealand, with implications for the distribution of alluvial pounamu (jade)
River bedload surveyed at 50 sites in Westland is dominated by Alpine Schist or Torlesse Greywacke from the Alpine Fault hanging wall, with subordinate Pounamu Ultramafics or footwall-derived Western Province rocks. Tumbling experiments found ultramafics to have the lowest attrition rates, compared with greywacke sandstone and granite (which abrade to produce silt to medium-sand), or incompetent schist (which fragments). Arahura has greater total concentrations (103â105 t/km2) and proportions (5â40%) of ultramafic bedload compared with Hokitika and Taramakau catchments (101â104 t/km2, mostly <10%), matching relative areas of mapped Pounamu Ultramafic bedrock, but enriched relative to absolute areal proportions. Western Province rocks downthrown by the Alpine Fault are under-represented in the bedload. Enriched concentrations of ultramafic bedload decrease rapidly with distance downstream from source rock outcrops, changing near prominent ice-limit moraines. Bedload evolution with transport involves both downstream fining and dilution from tributaries, in a sediment supply regime more strongly influenced by tectonics and the imprint of past glaciation. Treasured New Zealand pounamu (jade) is associated with ultramafic rocks. Chances of discovery vary between catchments, are increased near glacial moraines, and are highest near source-rock outcrops in remote mountain headwaters
Structural and thermal evolution of the eastern Aar Massif: insights from structural field work and Raman thermometry
The thermo-kinematic evolution of the eastern Aar Massif, Swiss Alps, was investigated using peak temperature data estimated from Raman spectroscopy of carbonaceous material and detailed field analyses. New and compiled temperature-time constraints along the deformed and exhumed basement-cover contact allow us to (i) establish the timing of metamorphism and deformation, (ii) track long-term horizontal and vertical orogenic movements and (iii) assess the influence of temperature and structural inheritance on the kinematic evolution. We present a new shear zone map, structural cross sections and a step-wise retrodeformation. From ca.\;26\,Ma onwards, basement-involved deformation started with the formation of relatively discrete NNW-directed thrusts. Peak metamorphic isograds are weakly deformed by these thrusts, suggesting that they initiated before or during the metamorphic peak under ongoing burial in the footwall to the basal Helvetic roof thrust. Subsequent peak- to post-metamorphic deformation was dominated by steep, mostly NNW-vergent reverse faults (ca. 22â14 Ma). Field investigations demonstrate that these shear zones were steeper than 50â already at inception. This produced the massif-internal structural relief and was associated with large vertical displacements (7 km shortening vs. up to 11 km exhumation). From 14 Ma onwards, the eastern Aar massif exhumed âen blocâ (i.e., without significant differential massif-internal exhumation) in the hanging wall of frontal thrusts, which is consistent with the transition to strike-slip dominated deformation observed within the massif. Our results indicate 13 km shortening and 9 km exhumation between 14 Ma and present. Inherited normal faults were not significantly reactivated. Instead, new thrusts/reverse faults developed in the basement below syn-rift basins, and can be traced into overturned fold limbs in the overlying sediment, producing tight synclines and broad anticlines along the basement-cover contact. The sediments were not detached from their crystalline substratum and formed disharmonic folds. Our results highlight decreasing rheological contrasts between (i) relatively strong basement and (ii) relatively weak cover units and inherited faults at higher temperature conditions. Both the timing of basement-involved deformation and the structural style (shear zone dip) appear to be controlled by evolving temperature conditions
120 years of georesources research in Switzerland: the Swiss Geotechnical Commission (1899-2018)
Geological surveys have a wide range of tasks for their countries: to map the geology and to assess the georesources potential for metallic ores, industrial minerals, geothermal energy, fossil fuels, aggregates and groundwater. In Europe, most countries founded geological surveys around the mid-nineteenth century in order to create an overview of the geological resources they wanted to exploit. In Switzerland, at that time, the industrial revolution triggered a tremendous demand for infrastructure and energy raw materials. However, no national georesources institution was established when the nation-forming process among the 25 cantons culminated in the foundation of the Swiss Federal State in 1848. The Swiss Geological Survey was founded 138 years later in 1986. How did Switzerland map the country, assess the resource potential and provide fundamental data for land use planning without such an organisation? This paper elaborates on the evolution of Swiss institutions mandated to study the geological resources, with a focus on the Swiss Geotechnical Commission (SGTK, 1899-2018). Given the low financial resources, no long-term nation-wide investigation programs could be implemented. The commission's study program was mainly driven by external societal and political factors. World War I for example reactivated the search for coal which was intensively exploited during those years. Before and during World War II, the focus temporarily shifted to oil and gas exploration. From 1970 onwards, SGTK was involved in several applied research projects and collaborations with various industry partners. In this paper, we revisit the key turning points in the evolution of the commission's investigation program, including related financial and organisational aspects, and discuss how Switzerland's federalistic structure influenced the geological survey activities. The history of the SGTK represents an exemplification of how a nation managed its geological survey activities, until 1986 in the absence of a geological survey and without large hydrocarbon and metallic ore resources and a corresponding, significant mining industry. The SGTK case also shows that flexible, project-based investigations can be advantageous as they respond to current challenges at short notice. This could to some degree substitute the initial absence of a geological survey, as shown by the numerous SGTK monographs that are key references also 100 years after their publication.ISSN:1661-8734ISSN:1661-872
Structural and thermal evolution of the eastern Aar Massif: insights from structural field work and Raman thermometry
The thermo-kinematic evolution of the eastern Aar Massif, Swiss Alps, was investigated using peak temperature data estimated from Raman spectroscopy of carbonaceous material and detailed field analyses. New and compiled temperature-time constraints along the deformed and exhumed basement-cover contact allow us to (i) establish the timing of metamorphism and deformation, (ii) track long-term horizontal and vertical orogenic movements and (iii) assess the influence of temperature and structural inheritance on the kinematic evolution. We present a new shear zone map, structural cross sections and a step-wise retrodeformation. From ca.\;26\,Ma onwards, basement-involved deformation started with the formation of relatively discrete NNW-directed thrusts. Peak metamorphic isograds are weakly deformed by these thrusts, suggesting that they initiated before or during the metamorphic peak under ongoing burial in the footwall to the basal Helvetic roof thrust. Subsequent peak- to post-metamorphic deformation was dominated by steep, mostly NNW-vergent reverse faults (ca. 22â14 Ma). Field investigations demonstrate that these shear zones were steeper than 50â already at inception. This produced the massif-internal structural relief and was associated with large vertical displacements (7 km shortening vs. up to 11 km exhumation). From 14 Ma onwards, the eastern Aar massif exhumed âen blocâ (i.e., without significant differential massif-internal exhumation) in the hanging wall of frontal thrusts, which is consistent with the transition to strike-slip dominated deformation observed within the massif. Our results indicate 13 km shortening and 9 km exhumation between 14 Ma and present. Inherited normal faults were not significantly reactivated. Instead, new thrusts/reverse faults developed in the basement below syn-rift basins, and can be traced into overturned fold limbs in the overlying sediment, producing tight synclines and broad anticlines along the basement-cover contact. The sediments were not detached from their crystalline substratum and formed disharmonic folds. Our results highlight decreasing rheological contrasts between (i) relatively strong basement and (ii) relatively weak cover units and inherited faults at higher temperature conditions. Both the timing of basement-involved deformation and the structural style (shear zone dip) appear to be controlled by evolving temperature conditions.ISSN:1661-8734ISSN:1661-872
Provenance analysis using Raman spectroscopy of carbonaceous material: A case study in the Southern Alps of New Zealand
Detrital provenance analyses in orogenic settings, in which sediments are collected at the outlet of a catchment, have become an important tool to estimate how erosion varies in space and time. Here we present how Raman Spectroscopy on Carbonaceous Material (RSCM) can be used for provenance analysis. RSCM provides an estimate of the peak temperature (RSCM-T) experienced during metamorphism. We show that we can infer modern erosion patterns in a catchment by combining new measurements on detrital sands with previously acquired bedrock data. We focus on the Whataroa catchment in the Southern Alps of New Zealand and exploit the metamorphic gradient that runs parallel to the main drainage direction. To account for potential sampling biases, we also quantify abrasion properties using flume experiments and measure the total organic carbon content in the bedrock that produced the collected sands. Finally, we integrate these parameters into a mass-conservative model. Our results first demonstrate that RSCM-T can be used for detrital studies. Second, we find that spatial variations in tracer concentration and erosion have a first-order control on the RSCM-T distributions, even though our flume experiments reveal that weak lithologies produce substantially more fine particles than do more durable lithologies. This result implies that sand specimens are good proxies for mapping spatial variations in erosion when the bedrock concentration of the target mineral is quantified. The modeling suggests that highest present-day erosion rates (in Whataroa catchment) are not situated at the range front but around 10 km into the mountain belt
Automated extraction of orientation and stratigraphic thickness from geological maps
Geological maps are available for almost every region of the world and, therefore, represent the most commonly used source of information for earth scientists. Advances in computing power and the availability of digital elevation data have opened new possibilities to automatically extract quantitative information from geological maps, especially in regions with topographic relief and good bedrock exposure. We present an innovative approach to automatically extract orientation (dip direction/dip) and stratigraphic thickness from a 1:25âČ000 geological map vector data set of the Swiss Alps. The approach allows a rapid spatial overview on the orientation and thickness of a given geological unit over large areas. Key improvements of the approach with respect to commonly used 3D modelling approaches are its objectivity, rapidity and the possibility to classify and/or filter orientation and thickness model output after five numeric reliability parameters. The approach is designed to support authorities and the industry in performing a rapid screening of a given region and to early identify promising areas for potential mineral extraction projects. Large-scale spatial overviews on the orientation and thickness of geological units are of large interest in many other disciplines such as tectonic and stratigraphic reconstruction, hydrogeological or geotechnical analyses. Therefore, the approach will be widely applicable also beyond the evaluation of potential mineral resources.ISSN:0191-814
Orogen-Parallel Migration of Exhumation in the Eastern Aar Massif Revealed by Low-T Thermochronometry
New and published (U-Th)/He data on zircon, apatite, and zircon fission track ages constrain the thermal overprint and cooling history of the eastern Aar Massif, Switzerland. The timing and pattern of cooling is in agreement with independent kinematic and age constraints from exposed shear zones. This suggests that the cooling ages mainly reflect exhumation and that long-term exhumation-dynamics were mainly controlled by crustal-scale tectonic processes. Results of a statistical inverse model reveal significant diachrony in the timing of exhumation in the along-strike direction. Maximum exhumation rates ((Formula presented.) 1Â mm/yr) were initially located in the central Aar Massif (from (Formula presented.) 22 to 10Â Ma), then gradually migrated to the east between (Formula presented.) 10Â Ma and present, while the central Aar Massif continued to exhume at slower rates ((Formula presented.) 0.5Â mm/yr). The diachrony in the timing of exhumation may be explained by lateral variations in the inherited thickness or the density of the accreted European crust. We attribute the increase in exhumation rates between 2Â Ma and present to enhanced glacial erosion. Nevertheless, the post 2Â Ma exhumation pattern reflects a continuation of noncylindrical massif âgrowthâ in the eastward orogen-parallel direction. This indicates thatâalthough at slow ratesâthick-skinned and buoyancy-driven compressional deformation, likely enhanced by the presence of easily erodible flysch units at the surface, might still be ongoing especially in the eastern Aar Massif. Noncylindrical massif-growth is likely to also affect other External Crystalline Massifs or orogens, but may be overlooked because studies often focus on single orogen-perpendicular transects.ISSN:2169-9313ISSN:0148-0227ISSN:2169-935