The effect of inhaled air temperature on thermal comfort, perceived air quality, acute health symptoms and physiological responses at two ambient temperatures

We explored the importance of inhaled air temperature on thermal comfort, perceived air quality, acute non-clinical health symptoms, and physiological responses. Sixteen subjects stayed in a stainless-steel chamber for 90 min. They experienced four conditions with two inhaled air temperatures of 22 and 30°C and two ambient temperatures of 22 and 30°C in a 2 × 2 design. They wore breathing masks covering their mouth and nose to control the inhaled air temperature; the air was provided from an adjacent twin stainless-steel chamber. The subjects evaluated thermal conditions and health symptoms on visual-analogue scales. Skin temperature and electrocardiography were recorded. Whole-body thermal sensation and skin temperature did not change when the temperature of inhaled air was changed. Perceived air quality was significantly improved when subjects sat in the chamber at 30°C and inhaled air with a temperature of 22°C; under these conditions lip and throat dryness were significantly reduced. The lower inhaled air temperature increased time-domain heart rate variability indicators and decreased heart rate and the LF/HF ratio, suggesting that the parasympathetic nervous system was activated and the sympathetic nervous system was suppressed

Experiment and Simulation Study on the Amorphous Silicon Photovoltaic Walls

Based on comparative study on two amorphous silicon photovoltaic walls (a-Si PV walls), the temperature distribution and the instant power were tested; and with EnergyPlus software, similar models of the walls were built to simulate annual power generation and air conditioning load. On typical sunshine day, the corresponding position temperature of nonventilated PV wall was generally 0.5~1.5°C higher than that of ventilated one, while the power generation was 0.2%~0.4% lower, which was consistent with the simulation results with a difference of 0.41% in annual energy output. As simulation results, in summer, comparing the PV walls with normal wall, the heat per unit area of these two photovoltaic walls was 5.25 kWh/m2 (nonventilated) and 0.67 kWh/m2 (ventilated) higher, respectively. But in winter the heat loss of nonventilated one was smaller, while ventilated PV wall was similar to normal wall. To annual energy consumption of heating and cooling, the building with ventilated PV wall and normal wall was also similar but slightly better than nonventilated one. Therefore, it is inferred that, at low latitudes, such as Zhuhai, China, air gap ventilation is suitable, while the length to thickness ratio of the air gap needs to be taken into account

Dielectric barrier discharge-based defect engineering method to assist flash sintering

Oxygen vacancy OV plays an important role in a flash sintering (FS) process. In defect engineering, the methods of creating oxygen vacancy defects include doping, heating, and etching, and all of them often have complex processes or equipment. In this study, we used dielectric barrier discharge (DBD) as a new defect engineering technology to increase oxygen vacancy concentrations of green billets with different ceramics (ZnO, TiO2, and 3 mol% yttria-stabilized zirconia (3YSZ)). With an alternating current (AC) power supply of 10 kHz, low-temperature plasma was generated, and a specimen could be treated in different atmospheres. The effect of the DBD treatment was influenced by atmosphere, treatment time, and voltage amplitude of the power supply. After the DBD treatment, the oxygen vacancy defect concentration in ZnO samples increased significantly, and a resistance test showed that conductivity of the samples increased by 2–3 orders of magnitude. Moreover, the onset electric field (E) of ZnO FS decreased from 5.17 to 0.86 kV/cm at room temperature (RT); while in the whole FS, the max power dissipation decreased from 563.17 to 27.94 W. The defect concentration and conductivity of the green billets for TiO2 and 3YSZ were also changed by the DBD, and then the FS process was modified. It is a new technology to treat the green billet of ceramics in very short time, applicable to other ceramics, and beneficial to regulate the FS process

How do urban residents use energy for winter heating at home? A large-scale survey in the hot summer and cold winter climate zone in the Yangtze River region

The increasing demand for improving indoor thermal environment in the hot summer and cold winter climate zone (HSCW) in the Yangtze River region in China poses enormous challenges in terms of energy policy and design solutions for this unique region. A comprehensive understanding of people’s habits and behaviors involving winter heating is imperative for decision making for urban heating infrastructure investment strategies that significantly impact the decarbonization of heating. However, there are little studies of a large-scale survey to gain such knowledge acrose the region. The aim of this study is to develop a rigorous survey method in order to obtain reliable data for analysis. Five municipal/capital cities across the upper, middle and downstream Yangtze River were surveyed based on 30 randomly generated locations in each city. A total of 8481 valuable samples were obtained in the survey conducted in the winter from November 2017 to March 2018. It is revealed that air conditioning/air source heat pumps are the predominant systems, accounting for 63% and 58% for bedroom and living room heating respectively. The use patterns of heating are diverse featuring ‘part-time-part-space’ systems in accordance with the occupancy patterns. There is significant evidence of the habit of opening a window to provide a gap for fresh air irrespective of whether the heating is in use. Two-step cluster analysis is employed to subdivide occupants’ heating-related behaviors into three clusters to characterize households. This study fills the knowledge gap of winter-heating-related behaviors. The research outcomes will benefit building energy simulations for energy prediction and help policy makers making decisions on providing strategic guidance in terms of winter heating solutions in this region

Subjective and Objective Evaluation of Shading on Thermal, Visual, and Acoustic Properties of Indoor Environments

Through objective measurement, subjective measurement, and prioritization methods, this study evaluates the impacts of different shading facilities on the indoor environment of multi-story residential buildings, such as dormitories. The objective measurements mainly include the operative temperature, daylight factor, and sound pressure level. The subjective measurement is obtained from occupant votes regarding their satisfaction with the thermal uniformity, natural lighting, external noise, and the overall indoor environment. The results show that the subjective evaluations were significantly more reliable than the objective measurements for predicting indoor environmental satisfaction. The prioritization method of the ordered logistic regression was then used to evaluate the impact of perceived indoor environmental quality on overall satisfaction. The results show that the impact of the perceived indoor environmental quality on overall satisfaction varied with the shading facilities. In addition, the occupants commented on the function of items affecting their application preferences and provided recommendations for improving balconies and sunshades to provide occupants with better indoor environments

A Novel Model for Calculating Human-Body Angle Factor in Radiant Heat Transfer: Balancing Computation Accuracy and Speed

With the growing interest in radiant heating and cooling systems, driven by their improved efficiency and enhanced thermal comfort compared to air systems, there is an increasing need to develop a more accessible method for designers to understand the implications of radiation heat exchange between the human body and radiant panels. To address this, a novel angle factor calculation model, named the HNU Angle Factor Model, was developed, taking into account the spatial arrangement and geometric relationship between the human body and radiant panels. The angle factors obtained using the HNU Angle Factor Model exhibited good agreement with the results obtained with Fanger diagrams and the contour integral method, with average relative differences of 8.1% and 10.0% for 140 cases, respectively. Furthermore, placing a radiant panel on the floor while maintaining its fixed size can contribute to the creation of an even and efficient thermal environment for individuals in both seated and standing positions. By implementing the HNU Angle Factor Model in practical engineering applications, more effective utilization of radiant systems can be achieved, as it provides an evaluation of the heat transfer between the human body and radiant panels

Simulation Research on the Heating Performance of the Combined System of Solar Energy and Heat-Source Tower Heat Pump in a Hot Summer and Cold Winter Area

Three connection methods for the combined heating systems of a closed-type heat-source tower heat pump (CHTHP) and solar collector (SC) were proposed in this paper: the heat-source tower (HST) and solar collector were connected in series (HST+SC), and the solar collector and heat pump (HP) condenser were connected in series (SC+HP) and in parallel (SC//HP). The calculation module of the closed heat-source tower was built using programming software based on C++ language, and three corresponding calculation models of the combined heating systems were established in the TRNSYS. Under the climatic conditions of the cold season in Changsha, the combined heating performance of the three systems was simulated and analyzed. The results indicate that the simulation results of the established models are in good agreement with the test results, and the simulation results can be used for the research of the system’s combined heating performance. When the outdoor air temperature and solar radiation intensity are low, the HST+SC system has the best heating performance; however, when the solar radiation intensity and ambient temperature are high, the heating performance of the SC//HP system is the best. When the solar radiation intensity and outdoor air temperature are between the previous two working conditions, the SC+HP system is the best performer for heating among the three systems. On the basis of the collector area and heat pump power designed in this study, the best operating condition interval diagrams of the three combined heating systems are established