725 research outputs found
Fracture mechanics approach to design analysis of notches, steps and internal cut-outs in planar components
A new approach to the assessment and optimization of geometric stress-concentrating features is proposed on the basis of the correspondence between sharp crack or corner stressfield intensity factors and conventional elastic stress concentration factors (SCFs) for radiused transitions. This approach complements the application of finite element analysis (FEA) and the use of standard SCF data from the literature. The method makes it possible to develop closed-form solutions for SCFs in cases where corresponding solutions for the sharp crack geometries exist. This is helpful in the context of design optimization. The analytical basis of the correspondence is shown, together with the limits on applicability where stress-free boundaries near the stress concentrating feature are present or adjacent features interact. Examples are given which compare parametric results derived from FEA with closed-form solutions based on the proposed method. New information is given on the stress state at a 90° corner or width step, where the magnitude of the stress field intensity is related to that of the corresponding crack geometry. This correspondence enables the user to extend further the application of crack-tip stress-field intensity information to square-cornered steps, external U-grooves, and internal cut-outs
How Preussag became TUI : kissing too many toads can make you a toad
In the period 1997-2004, Preussag, a diversified German conglomerate of old economy businesses, changed itself into TUI, a company focused almost entirely on tourism and logistics. This paper analyzes how this strategy was executed and how it contributed to Preussag’s underperformance of the stock market. We collect 417 announcements of acquisitions, financial disclosures and other news and disentangle the impact of different parts of the company’s strategy. We find that only the divestitures created value, that the strategy to invest in tourism destroyed value, and that the acquisition premiums Preussag paid were mostly unjustified. Bad luck like the events of September 11, 2001 cannot account for the poor performance of the stock. Poor management resulted from poor governance, combining a state-owned bank as the largest shareholder, board interlocks, and insufficient managerial incentives. The case shows how divestiture programs increase the liquid resources available to management beyond free operating cash flows and casts doubt on the positive governance role of institutional blockholders
Photoemission spectra of many-polaron systems
The cross over from low to high carrier densities in a many-polaron system is
studied in the framework of the one-dimensional spinless Holstein model, using
unbiased numerical methods. Combining a novel quantum Monte Carlo approach and
exact diagonalization, accurate results for the single-particle spectrum and
the electronic kinetic energy on fairly large systems are obtained. A detailed
investigation of the quality of the Monte Carlo data is presented. In the
physically most important adiabatic intermediate electron-phonon coupling
regime, for which no analytical results are available, we observe a
dissociation of polarons with increasing band filling, leading to normal
metallic behavior, while for parameters favoring small polarons, no such
density-driven changes occur. The present work points towards the inadequacy of
single-polaron theories for a number of polaronic materials such as the
manganites.Comment: 15 pages, 13 figures; final version, accepted for publication in
Phys. Rev.
Cationic vacancy induced room-temperature ferromagnetism in transparent conducting anatase Ti_{1-x}Ta_xO_2 (x~0.05) thin films
We report room-temperature ferromagnetism in highly conducting transparent
anatase Ti1-xTaxO2 (x~0.05) thin films grown by pulsed laser deposition on
LaAlO3 substrates. Rutherford backscattering spectrometry (RBS), x-ray
diffraction (XRD), proton induced x-ray emission (PIXE), x-ray absorption
spectroscopy (XAS) and time-of-flight secondary ion mass spectrometry
(TOF-SIMS) indicated negligible magnetic contaminants in the films. The
presence of ferromagnetism with concomitant large carrier densities was
determined by a combination of superconducting quantum interference device
(SQUID) magnetometry, electrical transport measurements, soft x-ray magnetic
circular dichroism (SXMCD), XAS, and optical magnetic circular dichroism (OMCD)
and was supported by first-principle calculations. SXMCD and XAS measurements
revealed a 90% contribution to ferromagnetism from the Ti ions and a 10%
contribution from the O ions. RBS/channelling measurements show complete Ta
substitution in the Ti sites though carrier activation was only 50% at 5% Ta
concentration implying compensation by cationic defects. The role of Ti vacancy
and Ti3+ was studied via XAS and x-ray photoemission spectroscopy (XPS)
respectively. It was found that in films with strong ferromagnetism, the Ti
vacancy signal was strong while Ti3+ signal was absent. We propose (in the
absence of any obvious exchange mechanisms) that the localised magnetic
moments, Ti vacancy sites, are ferromagnetically ordered by itinerant carriers.
Cationic-defect-induced magnetism is an alternative route to ferromagnetism in
wide-band-gap semiconducting oxides without any magnetic elements.Comment: 21 pages, 10 figures, to appear in Philosophical Transaction - Royal
Soc.
Microbubble-Based Model Analysis of Liquid Breakdown Initiation by a Submicrosecond Pulse
An electrical breakdown model for liquids in response to a submicrosecond(∼100ns) voltage pulse is presented, and quantitative evaluations carried out. It is proposed that breakdown is initiated by field emission at the interface of pre-existing microbubbles. Impact ionization within the microbubble gas then contributes to plasma development, with cathode injection having a delayed and secondary role. Continuous field emission at the streamer tip contributes to filament growth and propagation. This model can adequately explain almost all of the experimentally observed features, including dendritic structures and fluctuations in the prebreakdown current. Two-dimensional, time-dependent simulations have been carried out based on a continuum model for water, though the results are quite general. Monte Carlo simulations provide the relevant transport parameters for our model. Our quantitative predictions match the available data quite well, including the breakdown delay times and observed optical emission
Effect of fiber orientation and specimen thickness on the tensile response of strain hardening UHPFRC mixes with reduced Embodied Energy
Ultra-High Performance Fiber Reinforced Concretes (UHPFRC) have demonstrated their potential to contain the explosion of maintenance costs (Economy and Environment) for civil engineering structures, due to their extremely low permeability associated with the outstanding mechanical properties. Substitution of Embodied- Energy (EE)-costly components of UHPFRC such as clinker and steel fibers, is the next step towards sustainability, to make it even more efficient and more environment- friendly. In this study, a strain hardening UHPFRC mix with two main modifications has been developed in which (1) 75% of steel fibers have been replaced by ultra-high molecular weight polyethylene (UHMWPE, henceforth referred to as PE) fibers and (2) 50% volume of cement type CEM I have been replaced with limestone filler. The effect of the fiber orientation and the specimen thickness on the mechanical properties of such mixes have been investigated. The mechanical properties have been investigated using direct tensile test, and 4-point bending test. Finally, the dramatic effect of fiber orientation on the ultimate strength and deformability has been demonstrated. Moreover, the results confirm that the specimen thickness affects the deformation capacity of the specimens. Finally, improvements in terms of reduction of EE of the proposed mixes are highlighted
- …