220 research outputs found

    FM-BEM and topological derivative applied to inverse acoustic scattering

    No full text
    This study is set in the framework of inverse scattering of scalar (e.g. acoustic) waves. A qualitative probing technique based on the distribution of topological sensitivity of the cost functional associated with the inverse problem with respect to the nucleation of an infinitesimally-small hard obstacle is formulated. The sensitivity distribution is expressed as a bilinear formula involving the free field and an adjoint field associated with the cost function. These fields are computed by means of a boundary element formulation accelerated by the Fast Multipole method. A computationally fast approach for performing a global preliminary search based on the available overspecified boundary data is thus defined. Its usefulness is demonstrated through results of numerical experiments on the qualitative identification of a hard obstacle in a bounded acoustic domain, for configurations featuring O(10^{5}) nodal unknowns and O(10^{6}) sampling points

    Topological sensitivity and FMM-accelerated BEM applied to 3D acoustic inverse scattering

    No full text
    This study is set in the framework of inverse scattering of scalar (e.g. acoustic) waves. A qualitative probing technique based on the distribution of topological sensitivity of the cost functional associated with the inverse problem with respect to the nucleation of an infinitesimally-small hard obstacle is formulated. The sensitivity distribution is expressed as a bilinear formula involving the free field and an adjoint field associated with the cost function. These fields are computed by means of a boundary element formulation accelerated by the Fast Multipole method. A computationally fast approach for performing a global preliminary search based on the available overspecified boundary data is thus defined. Its usefulness is demonstrated through results of numerical experiments on the qualitative identification of a hard obstacle in a bounded acoustic domain, for configurations featuring O(105)O(10^{5}) nodal unknowns and O(10^{6})$ sampling points

    Fast non-iterative methods for defect identification

    No full text
    This communication summarizes recent investigations on the identification of defects (cavities, inclusions) of unknown geometry and topology by means of the concept of topological sensitivity. This approach leads to the fast computation (equivalent to performing a few direct solutions), by means of ordinary numerical solution methods such as the BEM (used here), the FEM or the FDM, of defect indicator functions. Substantial further acceleration is obtained by using fast multipole accelerated BEMs. Possibilities afforded by this approach are demonstrated on numerical examples. The paper concludes with a discussion of further research on theoretical and numerical issues

    Production of ultracold heteronuclear YbRb* molecules by photoassociation

    Full text link
    We have produced ultracold heteronuclear YbRb∗^* molecules in a combined magneto-optical trap by photoassociation. The formation of electronically excited molecules close to the dissociation limit was observed by trap loss spectroscopy in mixtures of 87^{87}Rb with 174^{174}Yb and 176^{176}Yb. The molecules could be prepared in a series of vibrational levels with resolved rotational structure, allowing for an experimental determination of the long-range potential in the electronically excited state

    Volatile organic compound fluxes and concentrations in London (ClearfLo)

    Get PDF
    Volatile organic compounds (VOCs) from anthropogenic sources such as fuel combustion or evaporative emissions can directly and indirectly affect human health. Some VOCs, such as benzene and 1,3- butadiene are carcinogens. These and other VOCs contribute to the formation of ozone (O3) and aerosol particles, which have effects on human health and the radiative balance of the atmosphere. Although in the UK VOC emissions are subject to control under European Commission Directive 2008/50/EC and emission reducing echnologies have been implemented, urban air pollution remains a concern. Urban air quality is likely to remain a priority since currently >50% of the global population live in urban areas with trends in urbanization and population migration predicted to increase. The ClearfLo project is a large multi-institutional consortium funded by the UK Natural Environment Research Council (NERC) and provides integrated measurements of meteorology, gas phase and particulate composition of the atmosphere over London. Both long term and IOP measurements were made at street and elevated locations at a range of sites across London and its surroundings during 2011 and 2012. Mixing ratios of a selection of nine VOCs were measured using a high sensitivity proton transfer reaction-mass spectrometer (PTR-MS) at a ground level urban background (North Kensington) and kerbside (Marylebone Road) site during the winter IOP. VOC fluxes were measured by virtually disjunct eddy covariance (vDEC) at an elevated urban site (King’s College Strand) in Aug-Dec 2012. Our results for the first IOP showed that most of the selected compound concentrations depended on traffic emissions, although there was a marked difference between the urban ackground and kerbside sites. We identified some temperature effects on VOC concentrations. We also present the first analyses of VOC flux measurements over London. Preliminary analyses indicate most compounds associated with vehicle emissions closely followed diurnal traffic counts. Fluxes of isoprene and methanol appear to be controlled by light intensity and temperature, consistent with a redominantly biogenic source of these compounds

    Sympathetic cooling in a mixture of diamagnetic and paramagnetic atoms

    Full text link
    We have experimentally realized a hybrid trap for ultracold paramagnetic rubidium and diamagnetic ytterbium atoms by combining a bichromatic optical dipole trap for ytterbium with a Ioffe-Pritchard-type magnetic trap for rubidium. In this hybrid trap, sympathetic cooling of five different ytterbium isotopes through elastic collisions with rubidium was achieved. A strong dependence of the interspecies collisional cross section on the mass of the ytterbium isotope was observed.Comment: 4 pages, 4 figure

    Seasonal trends in concentrations and fluxes of volatile organic compounds above central London

    Get PDF
    Concentrations and fluxes of seven volatile organic compounds (VOCs) were measured between August and December 2012 at a roof-top site in central London as part of the ClearfLo project (Clean Air for London). VOC concentrations were quantified using a proton transfer reaction-mass spectrometer and fluxes were calculated using a virtual disjunct eddy covariance technique. The median VOC fluxes, including aromatics, oxygenated compounds and isoprene, ranged from 0.07 to 0.33 mg m−2 h−1 and mixing ratios were 7.27 ppb for methanol (m / z 33) and <1 ppb for the remaining compounds. Strong relationships were observed between most VOC fluxes and concentrations with traffic density, but also with photosynthetically active radiation (PAR) and temperature for the oxygenated compounds and isoprene. An estimated 50–90 % of aromatic fluxes were attributable to traffic activity, which showed little seasonal variation, suggesting boundary layer effects or possibly advected pollution may be the primary causes of increased concentrations of aromatics in winter. PAR and temperature-dependent processes accounted for the majority of isoprene, methanol and acetaldehyde fluxes and concentrations in August and September, when fluxes and concentrations were largest. Modelled biogenic isoprene fluxes using the G95 algorithm agreed well with measured fluxes in August and September, due to urban vegetation. Comparisons of estimated annual benzene emissions from the London and National Atmospheric Emissions Inventory agreed well with measured benzene fluxes. Flux footprint analysis indicated emission sources were localized and that boundary layer dynamics and source strengths were responsible for temporal and spatial VOC flux and concentration variability during the measurement period

    Operation of EMEP ‘supersites’ in the United Kingdom. Annual report for 2008.

    Get PDF
    As part of its commitment to the UN-ECE Convention on Long-range Transboundary Air Pollution the United Kingdom operates two ‘supersites’ reporting data to the Co-operative Programme for Monitoring and Evaluation of the Long-range Transmission of Air Pollutants in Europe (EMEP). This report provides the annual summary for 2008, the second full calendar year of operation of the first EMEP ‘supersite’ to be established in the United Kingdom. Detailed operational reports have been submitted to Defra every 3 months, with unratified data. This annual report contains a summary of the ratified data for 2008. The EMEP ‘supersite’ is located in central southern Scotland at Auchencorth (3.2oW, 55.8oN), a remote rural moorland site ~20 km south-west of Edinburgh. Monitoring operations started formally on 1 June 2006. In addition to measurements made specifically under this contract, the Centre for Ecology & Hydrology also acts as local site operator for measurements made under other UK monitoring networks: the Automated Urban and Rural Network (AURN), the UK Eutrophication and Acidification Network (UKEAP), the UK Hydrocarbons Network, and the UK Heavy Metals Rural Network. Some measurements were also made under the auspices of the ‘Air Pollution Deposition Processes’ contract. All these associated networks are funded by Defra. This report summarises the measurements made between January and December 2008, and presents summary statistics on average concentrations. The site is dominated by winds from the south-west, but wind direction data highlight potential sources of airborne pollutants (power stations, conurbations). The average diurnal patterns of gases and particles are consistent with those expected for a remote rural site. The frequency distributions are presented for data where there was good data capture throughout the whole period. Some components (e.g. black carbon) show log-normal frequency distributions, while other components (e.g. ozone) have more nearly normal frequency distributions. A case study is presented for a period in June 2008, showing the influence of regional air pollutants at this remote rural site. All the data reported under the contract are shown graphically in the Appendix
    • …
    corecore