Located horizon variation study Final report, 20 May 1968 - 13 Jan. 1969

Meteorological data interpolation techniques for computing horizon radiance profiles evaluated for possible error introduction

Influence of temperature and the role of chromium on the kinetics of sulfidation of 310 stainless steel

The sulfidation of 310 stainless steel was studied over the temperature range from 910 K to 1285 K. By adjusting the ratio of hydrogen sulfide, variations in sulfur potential were obtained. The effect of temperature on sulfidation was determined at three different sulfur potentials: 39/sqNm, 0.014/sqNm, and 0.00015/sqNm. All sulfide scales contained one or two surface layers in addition to a subscale. The second outer layer (OL-II), furthest from the alloy, contained primarily Fe-Ni-S. The first outer layer (OL-I), nearest the subscale, contained FE-Cr-S. The subscale consisted of sulfide inclusions in the metal matrix. At a given temperature and sulfur potential, the weight gain data obeyed the parabolic rate law after an initial transient period. The parabolic rate constants obtained at the sulfur potential of 39/sqNm did not show a break when the logarithm of the rate constant was plotted as a function of the inverse of absolute temperature. Sulfidation carried out at sulfur potentials below 0.02/sqNm, however, did show a break at 1145 K, which is termed as the transition temperature. This break was found to be associated with the changes which had occurred in the Fe:Cr ratio of OL-I. Below the transition temperature the activation energy was found to be approximately 125 kj/mole. Above the transition temperature the rate of sulfidation decreased with temperature but dependent on the Fe:Cr ratio in the iron-chromium-sulfide layers of the OL-I. A reaction mechanism consistent with the experimental results has been proposed

Sulfidation of 310 stainless steel at sulfur potentials encountered in coal conversion systems

The sulfidation of SAE 310 stainless steel was carried out in gas mixtures of hydrogen and hydrogen sulfide over a range of sulfur potentials anticipated in advanced coal gasification processes. The kinetics, composition, and morphology of sulfide scale formation were studied at a fixed temperature of 1,065 K over a range of sulfur potentials from .00015 Nm to the -2nd power to 900 Nm to the -2nd power. At all sulfur potentials investigated, the sulfide scales were found to be multilayered. The relative thickness of the individual layers as well as the composition was found to depend on the sulfur potential. The reaction was found to obey the parabolic rate law after an initial transient period. Considerably longer transient periods were found to be due to unsteady state conditions resulting from compositional variations in the spinel layer. The sulfur pressure dependence on the parabolic rate constant was found to best fit the equation K sub p equals const. (P sub S2) to the 1/nth power, where n equals 3.7. The growth of the outer layers was found to be primarily due to the diffusion of metal ions, iron being the predominant species. The inner layer growth was due to the dissociation of the primary product at the alloy scale interface and depended on the activity of chromium

Race, Class, And Gender In Boys\u27 Education: Repositioning Intersectionality Theory

Boys\u27 identities are distinctly gendered, racialized, and classed across disparate social and cultural contexts. Related intersectional identity processes are associated with boys\u27 academic success. While intersectionality has been utilized throughout boys\u27 education scholarship, a limited, light touch approach is often enacted. As a critical logic of interpretation, intersectionality theory accounts for race, class, and gender within equity-based empirical studies. The authors contend insufficient engagement with intersectionality may lead educational research on boys\u27 social and learner identities to become static. Examining boys\u27 identities through intersectional approaches reveals more complex insights particularly related to their school engagement. Critical of the recent boy crisis literature, this article strives to compel theorists of boys\u27 education to more fully leverage the history, constructs, and epistemologies of intersectionality

A comparative study of nonparametric methods for pattern recognition

The applied research discussed in this report determines and compares the correct classification percentage of the nonparametric sign test, Wilcoxon's signed rank test, and K-class classifier with the performance of the Bayes classifier. The performance is determined for data which have Gaussian, Laplacian and Rayleigh probability density functions. The correct classification percentage is shown graphically for differences in modes and/or means of the probability density functions for four, eight and sixteen samples. The K-class classifier performed very well with respect to the other classifiers used. Since the K-class classifier is a nonparametric technique, it usually performed better than the Bayes classifier which assumes the data to be Gaussian even though it may not be. The K-class classifier has the advantage over the Bayes in that it works well with non-Gaussian data without having to determine the probability density function of the data. It should be noted that the data in this experiment was always unimodal

Progress in Electroweak Baryogenesis

Recent work on generating the excess of matter over antimatter in the early universe during the electroweak phase transition is reviewed.Comment: 50 pages (figures on request), uses harvmac (table of contents correct for "l" format), UCSD-93-2,BU-HEP-93-

Dust obscuration studies along quasar sight lines using simulated galaxies

We use the results of a set of three-dimensional SPH-Treecode simulations which model the formation and early evolution of disk galaxies, including the generation of heavy elements by star formation, to investigate the effects of dust absorption in quasar absorption line systems. Using a simple prescription for the production of dust, we have compared the column density, zinc abundance and optical depth properties of our models to the known properties of Damped Lyman alpha systems. We find that a significant fraction of our model galaxy disks have a higher column density than any observed DLA system. We are also able to show that such parts of the disk tend to be optically thick, implying that any background quasar would be obscured through much of the disk. This would produce the selection effect against the denser absorption systems thought to be present in observations.Comment: 7 pages, 8 figures, to be published in MNRA

Boundary-detection algorithm for locating edges in digital imagery

The author has identified the following significant results. Initial development of a computer program which implements a boundary detection algorithm to detect edges in digital images is described. An evaluation of the boundary detection algorithm was conducted to locate boundaries of lakes from LANDSAT-1 imagery. The accuracy of the boundary detection algorithm was determined by comparing the area within boundaries of lakes located using digitized LANDSAT imagery with the area of the same lakes planimetered from imagery collected from an aircraft platform

Anomalous coupling between topological defects and curvature

We investigate a counterintuitive geometric interaction between defects and curvature in thin layers of superfluids, superconductors and liquid crystals deposited on curved surfaces. Each defect feels a geometric potential whose functional form is determined only by the shape of the surface, but whose sign and strength depend on the transformation properties of the order parameter. For superfluids and superconductors, the strength of this interaction is proportional to the square of the charge and causes all defects to be repelled (attracted) by regions of positive (negative) Gaussian curvature. For liquid crystals in the one elastic constant approximation, charges between 0 and $4\pi$ are attracted by regions of positive curvature while all other charges are repelled.Comment: 5 pages, 4 figures, minor changes, accepted for publication in Phys. Rev. Let