Input multiplicity analysis in a non-isothermal CSTR for acid-catalyzed hydrolysis of acetic anhydride

Multiplicity analysis gives practical guidance for process design to eliminate difficult operating regions associated with input and output multiplicities. Continuous stirred tank reactors (CSTRs) present challenging operational problems due to complex behavior such as input and output multiplicities, ignition/extinction, parametric sensitivity, and nonlinear oscillations. In the absence of a unified mathematical theory for representing various nonlinear system characteristics, the present study was aimed at understanding the dynamic behavior of CSTRs by means of experiments and to link the experimental data to theoretical considerations for further detection and elimination of operating problems. Theoretical modeling and analysis of a non-isothermal CSTR with acid-catalyzed hydrolysis of an acetic anhydride system for input multiplicity are discussed. Theoretical modeling of a non-isothermal CSTR using a root-finding technique was carried out for predicting steady-state temperatures. Alternatively, a mathematical model for a non-isothermal CSTR using unsteady-state mass and energy balance equations is proposed. Computer-based simulation was carried out using a program developed in MATLAB for final transient temperature and time-temperature data of the CSTR system under investigation. The results of a theoretical analysis conducted for confirming the existence of input multiplicity in non-isothermal CSTRs with acid-catalyzed hydrolysis of acetic anhydride were compared with experimental investigations for validation

A new emulsion liquid membrane based on a palm oil for the extraction of heavy metals

The extraction efficiency of hexavalent chromium, Cr(VI), from water has been investigated using a vegetable oil based emulsion liquid membrane (ELM) technique. The main purpose of this study was to create a novel ELM formulation by choosing a more environmentally friendly and non-toxic diluent such as palm oil. The membrane phase so formulated includes the mobile carrier tri-n-octylmethylammonium chloride (TOMAC), to facilitate the metal transport, and the hydrophilic surfactant Tween 80 to facilitate the dispersion of the ELM phase in the aqueous solution. Span 80 is used as surfactant and butanol as co-surfactant. Our results demonstrate that this novel ELM formulation, using the vegetable palm oil as diluent, is useful for the removal of hexavalent chromium with an efficiency of over 99% and is thus competitive with the already existing, yet less environmentally friendly, ELM formulations. This result was achieved with an optimal concentration of 0.1 M NaOH as stripping agent and an external phase pH of 0.5. Different water qualities have also been investigated showing that the type of water (deionized, distilled, or tap water) does not significantly influence the extraction rate

A new emulsion liquid membrane based on a palm oil for the extraction of heavy metals

The extraction efficiency of hexavalent chromium, Cr(VI), from water has been investigated using a vegetable oil based emulsion liquid membrane (ELM) technique. The main purpose of this study was to create a novel ELM formulation by choosing a more environmentally friendly and non-toxic diluent such as palm oil. The membrane phase so formulated includes the mobile carrier tri-n-octylmethylammonium chloride (TOMAC), to facilitate the metal transport, and the hydrophilic surfactant Tween 80 to facilitate the dispersion of the ELM phase in the aqueous solution. Span 80 is used as surfactant and butanol as co-surfactant. Our results demonstrate that this novel ELM formulation, using the vegetable palm oil as diluent, is useful for the removal of hexavalent chromium with an efficiency of over 99% and is thus competitive with the already existing, yet less environmentally friendly, ELM formulations. This result was achieved with an optimal concentration of 0.1 M NaOH as stripping agent and an external phase pH of 0.5. Different water qualities have also been investigated showing that the type of water (deionized, distilled, or tap water) does not significantly influence the extraction rate

Removal of methylene blue and orange-g from waste water using magnetic biochar

The study on the removal of methylene blue (MB) and orange-G dyes using magnetic biochar derived from the empty fruit bunch (EFB) was carried out. Process parameters such as pH, adsorbent dosage, agitation speed and contact time were optimized using Design-Expert Software v.6.0.8. The statistical analysis reveals that the optimum conditions for the maximum adsorption of MB are at pH 2 and pH 10, dosage 1.0 g, and agitation speed and contact time of 125 rpm and 120 min respectively. While for orange-G, at pH 2, dosage 1.0 g, and agitation speed and contact time of 125 rpm and 120 min respectively. The maximum adsorption capacity of 31.25 mg/g and 32.36 mg/g for MB and orange-G respectively. The adsorption kinetic for both dyes obeyed pseudo-second order

Adsorption of chromium (VI) on functionalized and non-functionalized carbon nanotubes

We did a comparative study on the adsorption capacity of Cr (VI) between functionalized carbon nanotubes (CNTs) and non-functionalized CNTs. The statistical analysis reveals that the optimum conditions for the highest removal of Cr (VI) are at pH 9, with dosage 0.1 gram, agitation speed and time of 120 rpm and 120 minutes, respectively. For the initial concentration of 1.0 mg/l, the removal efficiency of Cr (VI) using functionalized CNTs was 87.6% and 83% of non-functionalized CNTs. The maximum adsorption capacities of functionalized and non-functionalized CNTs were 2.517 and 2.49 mg/g, respectively. Langmuir and Freundlich models were adopted to study the adsorption isotherm, which provided a K L and K F value of 1.217 L/mg and 18.14 mg1−n L n /g functionalized CNT, while 2.365 L/mg and 2.307 mg1−n L n /g for non-functionalized CNTs. This result proves that functionalized CNTs are a better adsorbent with a higher adsorption capacity compared with the non-functionalized CNTs

Comparative kinetic study of functionalized carbon nanotubes and magnetic biochar for removal of Cd2+ ions from wastewater

We did a comparative study between functionalized multiwall carbon nanotube (FMWCNTs), and magnetic biochar was carried out to determine the most efficient adsorbent to be employed in the Cd 2+ ion removal. We optimized parameters such as agitation speed, contact time, pH and adsorbent dosage using design expert vrsion 6.08. The statistical analysis reveals that optimized condition for highest removal of Cd 2+ are at pH 5.0, with dosage 1.0 g, agitation speed and contact time of 100 rpm and 90 minutes, respectively. For the initial concentration of 10mg/l, the removal efficiency of Cd 2+ using FMWCNTs was 90% and and 82% of magnetic biochar. The maximum Cd 2+ adsorption capacities of both FMWCNTs and magnetic biochar were calculated: 83.33mg/g and 62.5mg/g. The Langmuir and Freundlich constants for FMWCNTs were 0.056 L/mg and 13.613 L/mg, while 0.098 L/mg and 25.204 L/mg for magnetic biochar. The statistical analysis proved that FMWCNTs have better adsorption capacity compared to magnetic biochar and both models obeyed the pseudo-second-order