386 research outputs found

    Single-step bioconversion of lignocellulose to hydrogen using novel moderately thermophilic bacteria

    Get PDF
    BACKGROUND: Consolidated bioprocessing (CBP) of lignocellulosic biomass to hydrogen offers great potential for lower cost and higher efficiency compared to processes featuring dedicated cellulase production. Current studies on CBP-based hydrogen production mainly focus on using the thermophilic cellulolytic bacterium Clostridium thermocellum and the extremely thermophilic cellulolytic bacterium Caldicellulosiruptor saccharolyticus. However, no studies have demonstrated that the strains in the genus Thermoanaerobacterium could be used as the sole microorganism to accomplish both cellulose degradation and H(2) generation. RESULTS: We have specifically screened for moderately thermophilic cellulolytic bacteria enabling to produce hydrogen directly from conversion of lignocellulosic materials. Three new strains of thermophilic cellulolytic bacteria in the genus Thermoanaerobacterium growing at a temperature of 60°C were isolated. All of them grew well on various plant polymers including microcrystalline cellulose, filter paper, xylan, glucose, and xylose. In particular, the isolated bacterium, designated as Thermoanaerobacterium thermosaccharolyticum M18, showed high cellulolytic activity and a high yield of H(2). When it was grown in 0.5% microcrystalline cellulose, approximately 82% cellulose was consumed, and the H(2) yield and maximum production rate reached 10.86 mmol/g Avicel and 2.05 mmol/L/h, respectively. Natural lignocellulosic materials without any physicochemical or biological pretreatment also supported appreciable growth of strain M18, which resulted in 56.07% to 62.71% of insoluble cellulose and hemicellulose polymer degradation in corn cob, corn stalk, and wheat straw with a yield of 3.23 to 3.48 mmol H(2)/g substrate and an average production rate of 0.10 to 0.13 mmol H(2)/L/h. CONCLUSIONS: The newly isolated strain T. thermosaccharolyticum M18 displayed effective degradation of lignocellulose and produced large amounts of hydrogen. This is the first report of a Thermoanaerobacterium species presenting cellulolytic characteristics, and this species thus represents a novel cellulolytic bacterium distinguished from all other known cellulolytic bacteria. In comparison, the extraordinary yield and specific rate of hydrogen for strain M18 obtained from lignocellulose make it more attractive in monoculture fermentation. T. thermosaccharolyticum M18 is thus a potential candidate for rapid conversion of lignocellulose to biohydrogen in a single step

    Buffering action of acetate on hydrogen production by Ethanoligenens harbinense B49

    Get PDF
    The buffering effect of acetate on hydrogen production during glucose fermentation by Ethanoligenens harbinense B49 was investigated compared to phosphate, a widely used fermentative hydrogen production buffer. Specific concentrations of sodium acetate or phosphate were added to batch cultures, and the effects on hydrogen production were comparatively analyzed using a modified Gompertz model. Adding 50 mM acetate or phosphate suppressed the hydrogen production peak and slightly extended the lag phase. However, the overall hydrogen yields were 113.5 and 108.5 mmol/L, respectively, and the final pH was effectively controlled. Acetate buffered against hydrogen production more effectively than did phosphate, promoting cell growth and preventing decreased pH. At buffer concentrations 100\u2013250 mM, the maximum hydrogen production was barely suppressed, and the lag phase extended past 7 h. Therefore, although acetate inhibits hydrogen production, using acetate as a buffer (like phosphate) effectively prevented pH drops and increased substrate consumption, enhancing hydrogen production

    A new lipid-rich microalga Scenedesmus sp. strain R-16 isolated using Nile red staining: effects of carbon and nitrogen sources and initial pH on the biomass and lipid production

    Get PDF
    BACKGROUND: Biodiesel production from oleaginous microalgae shows great potential as a promising alternative to conventional fossil fuels. Currently, most research focus on algal biomass production with autotrophic cultivation, but this cultivation strategy induces low biomass concentration and it is difficult to be used in large-scale algal biomass production. By contrast, heterotrophic algae allows higher growth rate and can accumulate higher lipid. However, the fast-growing and lipid-rich microalgae that can be cultivated in heterotrophic system for the industrial application of biodiesel production are still few. Traditional solvent extraction and gravimetric determination to detect the microalgal total lipid content is time-consuming and laborious, which has become a major limiting factor for selecting large number of algae specimens. Thus, it is critical to develop a rapid and efficient procedure for the screening of lipid-rich microalgae. RESULTS: A novel green microalga Scenedesmus sp. strain R-16 with high total lipid content was selected using the Nile red staining from eighty-eight isolates. Various carbon sources (fructose, glucose and acetate) and nitrogen sources (nitrate, urea, peptone and yeast extract) can be utilized for microalgal growth and lipid production, and the optimal carbon and nitrogen sources were glucose (10 g L(-1)) and nitrate (0.6 g L(-1)), respectively. Compared to autotrophic situation, the strain R-16 can grow well heterotrophically without light and the accumulated total lipid content and biomass reached 43.4% and 3.46 g L(-1), respectively. In addition, nitrogen deficiency led to an accumulation of lipid and the total lipid content was as high as 52.6%, and it was worth noting that strain R-16 exhibited strong tolerance to high glucose (up to 100 g L(-1)) and a wide range of pH (4.0-11.0). CONCLUSIONS: The newly developed ultrasonic-assisted Nile red method proved to be an efficient isolation procedure and was successfully used in the selection of oleaginous microalgae. The isolated novel green microalgal strain R-16 was rich in lipid and can live in varied and contrasting conditions. The algae appeared to have great potential for application in microalgae-based biodiesel production

    Effect of Fe3+ on the nutrient removal performance and microbial community in a biofilm system

    Get PDF
    In this study, the influence of Fe3+ on N removal, microbial assembly, and species interactions in a biofilm system was determined. The results showed that maximum efficiencies of ammonia nitrogen (NH4+-N), total nitrogen (TN), phosphorus (P), and chemical oxygen demand (COD) removal were achieved using 10 mg/L Fe3+, reaching values of 100, 78.85, 100, and 95.8%, respectively, whereas at concentrations of 15 and 30 mg/L Fe3+ suppressed the removal of NH4+-N, TN, and COD. In terms of absolute abundance, the expression of bacterial amoA, narG, nirK, and napA was maximal in the presence of 10 mg/L Fe3+ (9.18 × 105, 8.58 × 108, 1.09 × 108, and 1.07 × 109 copies/g dry weight, respectively). Irrespective of Fe3+ concentrations, the P removal efficiency remained at almost 100%. Candidatus_Competibacter (10.26–23.32%) was identified as the most abundant bacterial genus within the system. Determinism (50%) and stochasticity (50%) contributed equally to microbial community assembly. Co-occurrence network analysis revealed that in the presence of Fe3+, 60.94% of OTUs in the biofilm system exhibited positive interactions, whereas 39.06% exhibited negative interactions. Within the OTU-based co-occurrence network, fourteen species were identified as key microbes. The stability of the system was found to be predominantly shaped by microbial cooperation, complemented by competition for resources or niche incompatibility. The results of this study suggested that during chemical P removal in wastewater treatment plants using biofilm methods, the concentration of supplemental Fe3+ should be maintained at 10 mg/L, which would not only contribute to P elimination, but also enhance N and COD removal
    • …
    corecore