22 research outputs found

    Avulsion Fractures at the Base of the 2<sup>nd</sup> Metacarpal Due to the Extensor Carpi Radialis Longus Tendon: A Case Report and Review of the Literature

    Get PDF
    Introduction: Simultaneous contraction of the extensor carpi radialis longus (ECRL) with forced hyperflexion of the wrist can result in avulsion of the tendon and its bony attachment at its insertion at the dorsum of the base of the second metacarpal. This is a rare and often unreported fracture pattern. Case Presentation: We present a 31- year- old male who sustained a hyperflexion injury. He was managed surgically and had good post-operative outcomes. A literature search revealed 16 papers covering 18 cases of similar injuries. 12 were initially managed surgically and 6 were managed conservatively. Conclusions: Of the open reductions and internal fixations, 11 (92%) were successful and patients made a full recovery. Conservative management was unsuccessful in 4 cases; one patient required surgery for metacarpal boss, one patient had retraction of the tendon at one week follow up and another had weak flexion of the wrist. We recommend open reduction and internal fixation for these injuries. It may allow a faster recovery and therefore allow an earlier return to work and activit

    Dietary total antioxidant capacity and head and neck cancer: a large case-control study in Iran

    Get PDF
    BackgroundData on the association between head and neck cancer (HNC) and dietary factors are inconclusive. No study has so far investigated the association between dietary total antioxidant capacity (dTAC) and HNC concerning interactions with other risk factors.MethodPathologically confirmed new diagnosed HNC patients were included in this study. The control group was healthy hospital visitors who were frequently matched with patients on age (5 years interval), gender, and province of residence. Trained interviewers administered a validated Food Frequency Questionnaire (FFQ) to assess the participants’ food intake 1 year before the cancer diagnosis. Data on TAC scores of foods was collected by Ferric Reducing Antioxidant Power (FRAP) and Total Radical-trapping Antioxidant Parameters (TRAP) from published data. We applied logistic regression adjusted for age, sex, energy intake, socioeconomic status, province, opium use, alcohol use, physical activity, and dental health. We also studied the interaction of dTAC with tobacco smoking status, and opium use on the risk of HNC.ResultsWe recruited 876 HNC patients and 3,409 healthy controls. We observed a significant decrease in the odds of HNC with increasing dTAC scores. The OR of HNC for the third vs. the first tertile was 0.49 (95%CI 0.39–0.61) for FRAP and 0.49 (95%CI 0.39–0.62) for TRAP. Both dTAC scores were inversely associated with lip and oral (T3 ver. T1 OR = 0.51; 95%CI 0.36–0.71 for FRAP and OR = 0.59; 95% CI 0.44–0.82 for TRAP) and larynx (T3 ver. T1 OR = 0.43; 95%CI 0.31–0.61 for FRAP and OR = 0.38; 95% CI 0.26–0.55 for TRAP) cancers. There was no interaction between tobacco smoking, opium use; and TRAP or FRAP on the risk of HNC.ConclusionAn antioxidant-rich diet in terms of FRAP or TRAP could decrease the risk of HNC and its subtypes

    Dietary total antioxidant capacity and head and neck cancer : a large case-control study in Iran

    Get PDF
    Background: Data on the association between head and neck cancer (HNC) and dietary factors are inconclusive. No study has so far investigated the association between dietary total antioxidant capacity (dTAC) and HNC concerning interactions with other risk factors. Method: Pathologically confirmed new diagnosed HNC patients were included in this study. The control group was healthy hospital visitors who were frequently matched with patients on age (5 years interval), gender, and province of residence. Trained interviewers administered a validated Food Frequency Questionnaire (FFQ) to assess the participants’ food intake 1 year before the cancer diagnosis. Data on TAC scores of foods was collected by Ferric Reducing Antioxidant Power (FRAP) and Total Radical-trapping Antioxidant Parameters (TRAP) from published data. We applied logistic regression adjusted for age, sex, energy intake, socioeconomic status, province, opium use, alcohol use, physical activity, and dental health. We also studied the interaction of dTAC with tobacco smoking status, and opium use on the risk of HNC. Results: We recruited 876 HNC patients and 3,409 healthy controls. We observed a significant decrease in the odds of HNC with increasing dTAC scores. The OR of HNC for the third vs. the first tertile was 0.49 (95%CI 0.39–0.61) for FRAP and 0.49 (95%CI 0.39–0.62) for TRAP. Both dTAC scores were inversely associated with lip and oral (T3 ver. T1 OR = 0.51; 95%CI 0.36–0.71 for FRAP and OR = 0.59; 95% CI 0.44–0.82 for TRAP) and larynx (T3 ver. T1 OR = 0.43; 95%CI 0.31–0.61 for FRAP and OR = 0.38; 95% CI 0.26–0.55 for TRAP) cancers. There was no interaction between tobacco smoking, opium use; and TRAP or FRAP on the risk of HNC. Conclusion: An antioxidant-rich diet in terms of FRAP or TRAP could decrease the risk of HNC and its subtypes.Peer reviewe

    The Role of Axial Rotation in Total Ankle Replacement

    Get PDF
    Introduction/Purpose: The importance of implant orientation in the axial rotational plane is ill understood. No Total ankle replacement (TAR) implant deals specifically with rotation as part of the surgical technique. Preoperative computed tomography (CT) scan–derived patient-specific plans and guides (PROPHECY, Wright Medical Technology, Memphis, TN) have been developed for TAR scanning the knee and ankle for the purposes of patient specific instrumentation. The objectives of this study were to establish the range and relationship between the transtibial axis at the knee, the tibial tuberosity, and the transmalleolar axis using these CT scans in an adult population with ankle arthritis. Methods: 150 CT Scans of patients with end stage ankle osteoarthritis undergoing Psi, we measured the relationship between the transtibial axis, the tibial tuberosity and the transmalleolar axis (Figure 1). All CT scans were analysed using the Solidworks software (Dassault Systèmes). Varus or valgus arthritis, tibiotalar angle and presence of deformity was also recorded. Results: The mean difference in the axial plane between the transmalleolar axis and the tibial tuberosity was 17.9 ± 9.3 degrees externally rotated. There was a large range which was between -5 and 53 degrees of external rotation. The mean foot angle was 15.4 ± 11.1 degrees relative to the implant position. All planned implant positions were mean 1.0 ± 1.8 degrees (range -3.8 – 1.7 degrees) internally rotated to the transmalleolar axis. Varus or valgus ankle arthritis did not correlate with rotation of the tibial axis (p=0.4). Conclusion: There is a wide variation in rotational alignment of the tibia, which cannot be accurately assessed clinically or using plain radiographs. Surgical techniques that reference the tibial tuberosity to plan component alignment can be misleading and lead to implant malalignment. We recommend routine preoperative CT scanning prior to ankle replacement surgery and recommend research to assess the effects of axial rotation of implant performance and survival

    A monolithic three axis silicon capacitive accelerometer with micro g resolution

    No full text
    A monolithic three-axis silicon capacitive accelerometer utilizing a combined surface and bulk micromachining technology is demonstrated with micro-g resolution. The accelerometer consists of three individual single-axis accelerometers. All three devices have full-wafer thick silicon proof-mass, large area polysilicon sense/drive electrodes, and small sensing gap (5pF/g measured sensitivity and sub-/spl mu/g//spl radic/Hz mechanical noise floor for all three axes. The total measured noise floor of the accelerometer hybrid assembled with CMOS interface circuit is 1.60 /spl mu/g//spl radic/Hz, 1.08 /spl mu/g//spl radic/Hz for in-plane and out-of-plane devices, respectively

    Comparison of Mechanical Axis of the Limb Versus Anatomical Axis of the Tibia for Assessment of Tibiotalar Alignment in End-Stage Ankle Arthritis

    No full text
    Coronal plane ankle joint alignment is typically assessed using the tibiotalar angle (TTA), which relies on the anatomical axis of the tibia (AAT) and the articular surface of the talus as landmarks. Often, the AAT differs from the mechanical axis of the lower limb (MAL). We set out to test our hypothesis that the TTA using the MAL would differ from the TTA measured using the AAT in patients with ankle osteoarthritis

    The Role of Axial Rotation in Total Ankle Replacement

    No full text
    Category: Ankle Arthritis Introduction/Purpose: The importance of implant orientation in the axial rotational plane is ill understood. No Total ankle replacement (TAR) implant deals specifically with rotation as part of the surgical technique. Preoperative computed tomography (CT) scan–derived patient-specific plans and guides (PROPHECY, Wright Medical Technology, Memphis, TN) have been developed for TAR scanning the knee and ankle for the purposes of patient specific instrumentation. The objectives of this study were to establish the range and relationship between the transtibial axis at the knee, the tibial tuberosity, and the transmalleolar axis using these CT scans in an adult population with ankle arthritis. Methods: 150 CT Scans of patients with end stage ankle osteoarthritis undergoing Psi, we measured the relationship between the transtibial axis, the tibial tuberosity and the transmalleolar axis (Figure 1). All CT scans were analysed using the Solidworks software (Dassault Systèmes). Varus or valgus arthritis, tibiotalar angle and presence of deformity was also recorded. Results: The mean difference in the axial plane between the transmalleolar axis and the tibial tuberosity was 17.9 ± 9.3 degrees externally rotated. There was a large range which was between -5 and 53 degrees of external rotation. The mean foot angle was 15.4 ± 11.1 degrees relative to the implant position. All planned implant positions were mean 1.0 ± 1.8 degrees (range -3.8 – 1.7 degrees) internally rotated to the transmalleolar axis. Varus or valgus ankle arthritis did not correlate with rotation of the tibial axis (p=0.4). Conclusion: There is a wide variation in rotational alignment of the tibia, which cannot be accurately assessed clinically or using plain radiographs. Surgical techniques that reference the tibial tuberosity to plan component alignment can be misleading and lead to implant malalignment. We recommend routine preoperative CT scanning prior to ankle replacement surgery and recommend research to assess the effects of axial rotation of implant performance and survival

    Mechanical and Anatomical Axis in Total Ankle Arthroplasty

    No full text
    Category: Ankle Arthritis Introduction/Purpose: Inadequate correction of alignment in the coronal, sagittal or axial planes will inevitably lead to failure of the Total Ankle Arthroplasty (TAA). The mechanical axis of the lower limb (MAL), the mechanical axis of the tibia (MAT) and the anatomical axis of the tibia (AAT) are three recognized coronal plane measurements using plain radiography. The relationship between anatomical and mechanical axes depends on the presence of femoral or tibial deformities from trauma or inherited conditions, or previous corrective or replacement surgery. Ankle arthroplasty relies heavily on preoperative radiographs or CT scans and the purpose of this study was to assess whether MAL, MAT and AAT are the same in a cohort of patients upon which placement of TAA is considered. Methods: We analysed 75 patients operated on between 2015 and 2016 at a specialist tertiary centre for elective orthopaedic surgery. All patients had a pre-operative long leg radiograph. They were split into 2 groups. The first group had known deformity proximal to the ankle (such as previous tibial or femoral fracture, severe arthritis, or previous reconstructive surgery) and the second group had no clinically detectable deformity. The MAL, MAT and AAT were assessed and the difference between these values was calculated. Results: There were 54 patients in the normal group, and 21 patients in the deformity group. Overall, 25 patients(33%) had a difference between all three axes of less than 1 degree. In 33 patients(44%), there was a difference in one of the axes of ≥2 degrees. There was no significant difference between MAT and AAT in patients in the normal group(p=0.6). 95% of patients had a difference of <1 degree. There was a significant difference between the MAT and AAT in patients in the deformity group(p<0.01). In the normal group, 39 patients(73%) had a difference of <2 degrees between the AAT and MAL. In the deformity group, only 10 patients (48%) had a difference of <2 degrees.In fact, 24% of patients had a difference ≥3 degrees. Conclusion: Malalignment in the coronal plane in TAA may be an issue that we have not properly addressed. Up to 66% of patients without known deformity may have a TAA that is placed at least 1 degree incorrectly relative to the MAL. We recommend the use of full-length lower limb radiographs when planning a TAA in order to plan the placement of implants. The decision to perform extramedullary referencing, intramedullary referencing, or patient specific Instrumentation must be part of the pre-operative planning process

    Role of Rotation in Total Ankle Replacement

    No full text
    corecore