Characterization of highly-oriented ferroelectric Pb_xBa_(1-x)TiO_3

Pb_xBa_(1-x)TiO_3 (0.2 ≾ x ≾ 1) thin films were deposited on single-crystal MgO as well as amorphous Si_3N_4/Si substrates using biaxially textured MgO buffer templates, grown by ion beam-assisted deposition (IBAD). The ferroelectric films were stoichiometric and highly oriented, with only (001) and (100) orientations evident in x-ray diffraction (XRD) scans. Films on biaxially textured templates had smaller grains (60 nm average) than those deposited on single-crystal MgO (300 nm average). Electron backscatter diffraction (EBSD) has been used to study the microtexture on both types of substrates and the results were consistent with x-ray pole figures and transmission electron microscopy (TEM) micrographs that indicated the presence of 90° domain boundaries, twins, in films deposited on single-crystal MgO substrates. In contrast, films on biaxially textured substrates consisted of small single-domain grains that were either c or a oriented. The surface-sensitive EBSD technique was used to measure the tetragonal tilt angle as well as in-plane and out-of-plane texture. High-temperature x-ray diffraction (HTXRD) of films with 90° domain walls indicated large changes, as much as 60%, in the c and a domain fractions with temperature, while such changes were not observed for Pb_xBa_(1-x)TiO_3 (PBT) films on biaxially textured MgO/Si_3N_4/Si substrates, which lacked 90° domain boundaries

Graded ferroelectric capacitors with robust temperature characteristics

Ferroelectric thin films offer the possibility of engineering the dielectric response for tunable components in frequency-agile rf and microwave devices. However, this approach often leads to an undesired temperature sensitivity. Compositionally graded ferroelectric films have been explored as a means of redressing this sensitivity, but experimental observations vary depending on geometry and other details. In this paper, we present a continuum model to calculate the capacitive response of graded ferroelectric films with realistic electrode geometries by accurately accounting for the polarization distribution and long-range electrostatic interactions. We show that graded c-axis poled BaxSr_(1−xT)iO_3 BST parallel plate capacitors are ineffective while graded a-axis poled BST coplanar capacitors with interdigitated electrodes are extremely effective in obtaining high and temperature-stable dielectric properties

Colonic irrigation for defecation disorders after dynamic graciloplasty

AB - BACKGROUND AND AIMS: Dynamic graciloplasty (DGP) improves anal continence and quality of life for most patients. However, in some patients, DGP fails and fecal incontinence is unsolved or only partially improved. Constipation is also a significant problem after DGP, occurring in 13-90%. Colonic irrigation can be considered as an additional or salvage treatment for defecation disorders after unsuccessful or partially successful DGP. In this study, the effectiveness of colonic irrigation for the treatment of persistent fecal incontinence and/or constipation after DGP is investigated. MATERIALS AND METHODS: Patients with defecation disorders after DGP visiting the outpatient clinic of the University Hospital Maastricht were selected for colonic irrigation as additional therapy or salvage therapy in the period between January 1999 and June 2003. The Biotrol(R) Irrimatic pump or the irrigation bag was used for colonic irrigation. Relevant physical and medical history was collected. The patients were asked to fill out a detailed questionnaire about colonic irrigation. RESULTS: Forty-six patients were included in the study with a mean age of 59.3 +/- 12.4 years (80% female). On average, the patients started the irrigation 21.39 +/- 38.77 months after the DGP. Eight patients started irrigation before the DGP. Fifty-two percent of the patients used the irrigation as additional therapy for fecal incontinence, 24% for constipation, and 24% for both. Irrigation was usually performed in the morning. The mean frequency of irrigation was 0.90 +/- 0.40 times per day. The mean amount of water used for the irrigation was 2.27 +/- 1.75 l with a mean duration of 39 +/- 23 min. Four patients performed antegrade irrigation through a colostomy or appendicostomy, with good results. Overall, 81% of the patients were satisfied with the irrigation. Thirty-seven percent of the patients with fecal incontinence reached (pseudo-)continence, and in 30% of the patients, the constipation completely resolved. Side effects of the irrigation were reported in 61% of the patients: leakage of water after irrigation, abdominal cramps, and distended abdomen. Seven (16%) patients stopped the rectal irrigation. CONCLUSION: Colonic irrigation is an effective alternative for the treatment of persistent fecal incontinence after DGP and/or recurrent or onset constipation additional to unsuccessful or (partially) successful DG

Plasmon-Assisted Chemical Vapor Deposition

We introduce a new chemical vapor deposition (CVD) process that can be used to selectively deposit materials of many different types. The technique makes use of the plasmon resonance in nanoscale metal structures to produce the local heating necessary to initiate deposition when illuminated by a focused low-power laser. We demonstrate the technique, which we refer to as plasmon-assisted CVD (PACVD), by patterning the spatial deposition of PbO and TiO_2 on glass substrates coated with a dispersion of 23 nm gold particles. The morphology of both oxide deposits is consistent with local laser-induced heating of the gold particles by more than 150 °C. We show that temperature changes of this magnitude are consistent with our analysis of the heat-loss mechanisms. The technique is general and can be used to spatially control the deposition of virtually any material for which a CVD process exists

Laser induced birefringence in La–Ga–S–O–Gd glass polymer nanocomposites

In this work, we demonstrate a possibility to use La–Ga–S–O–Gd glass polymer nanocomposites as effective materials for photo-induced birefringence. Here we chose PVA as a photopolymer matrix. The photo-induced effects were studied using 8 ns Nd: YAG laser generating bicolor coherent light beams with wavelengths 1064, and 532 nm. The detection of the photo-induced birefringence was carried out using cw He–Ne laser at 1150 nm. The optimal concentration of the nanoglass favoring maximal changes of refractive indices is established. The photo-induced laser power density was changed up to 0.9 GW/cm2. The photo-induced beams were incident at angles varying within the 32° and 52° with respect to the nanocomposite planes. The polarizations of the beams did not play principal role. We discovered an appearance of maximal birefringence equal to about 0.078. The effect is strongly dependent on the nanoparticle sizes and is completely reversible after switching off the laser treatment within several milliseconds. Such features are useful for the recording of optical information and production of gratings with desirable periods