Characterization of low-significance gravitational-wave compact binary sources

Advanced LIGO and Virgo have so far detected gravitational waves from 10 binary black hole mergers (BBH) and 1 binary neutron star merger (BNS). In the future, we expect the detection of many more marginal sources, since compact binary coalescences detectable by advanced ground-based instruments are roughly distributed uniformly in comoving volume. In this paper we simulate weak signals from compact binary coalescences of various morphologies and optimal network signal-to-noise ratios (henceforth SNRs), and analyze if and to which extent their parameters can be measured by advanced LIGO and Virgo in their third observing run. We show that subthreshold binary neutron stars, with SNRs below 12 (10) yield uncertainties in their sky position larger than 400 (700) deg2 (90% credible interval). The luminosity distance, which could be used to measure the Hubble constant with standard sirens, has relative uncertainties larger than 40% for BNSs and neutron star black hole mergers. For sources with SNRs below 8, it is not uncommon that the extrinsic parameters, sky position and distance, cannot be measured. Next, we look at the intrinsic parameters, masses and spins. We show that the detector-frame chirp mass can sometimes be measured with uncertainties below 1% even for sources at SNRs of 6, although multimodality is not uncommon and can significantly broaden the posteriors. The effective inspiral spin is best measured for neutron star black hole mergers, for which the uncertainties can be as low as ∼0.08 (∼0.2) at SNR 12 (8). The uncertainty is higher for systems with comparable component masses or lack of spin precession

Enhancing the dynamic range of deformable mirrors with compression bias

We report the design and testing of a compression-biased thermally-actuated deformable mirror that has a dynamic range larger than the limit imposed by pure-bending stress, negligible higher-order-mode scattering, and a linear defocus response and that is vacuum compatible. The optimum design principles for this class of actuator are described and a mirror with 370 mD dynamic range is demonstrated

Mid-IR laser for wavefront correction in gravitational wave detectors

The next-generation gravitational wave detectors aim to enhance our understanding of extreme phenomena in the Universe. The high-frequency sensitivity of these detectors will be maximized by injecting squeezed vacuum states into the detector. However, the performance advantages offered by squeezed state injection can be easily degraded by losses in the system. A significant source of loss is the mode mismatch between optical cavities within the interferometer. To overcome this issue, new actuators are required that can produce a highly spherical wavefront change, with minimal higher order aberrations, whist adding low phase noise to the incident beam

Enhancing the dynamic range of deformable mirrors with compression bias

We report the design and testing of a compression-biased thermally-actuated deformable mirror that has a dynamic range larger than the limit imposed by pure-bending stress, negligible higher-order-mode scattering, and a linear defocus response and that is vacuum compatible. The optimum design principles for this class of actuator are described and a mirror with 370 mD dynamic range is demonstrated.Huy Tuong Cao, Sebastian W. S. Ng, Minkyun Noh, Aidan Brooks, Fabrice Matichard and Peter J. Veitc

A Cryogenic Silicon Interferometer for Gravitational-wave Detection

The detection of gravitational waves from compact binary mergers by LIGO has opened the era of gravitational wave astronomy, revealing a previously hidden side of the cosmos. To maximize the reach of the existing LIGO observatory facilities, we have designed a new instrument that will have 5 times the range of Advanced LIGO, or greater than 100 times the event rate. Observations with this new instrument will make possible dramatic steps toward understanding the physics of the nearby universe, as well as observing the universe out to cosmological distances by the detection of binary black hole coalescences. This article presents the instrument design and a quantitative analysis of the anticipated noise floor

Piezo-deformable mirrors for active mode matching in advanced LIGO

The detectors of the laser interferometer gravitational-wave observatory (LIGO) are broadly limited by the quantum noise and rely on the injection of squeezed states of light to achieve their full sensitivity. Squeezing improvement is limited by mode mismatch between the elements of the squeezer and the interferometer. In the current LIGO detectors, there is no way to actively mitigate this mode mismatch. This paper presents a new deformable mirror for wavefront control that meets the active mode matching requirements of advanced LIGO. The active element is a piezo-electric transducer, which actuates on the radius of curvature of a 5 mm thick mirror via an axisymmetric flexure. The operating range of the deformable mirror is 120±8 mD in vacuum and an additional 200 mD adjustment range accessible out of vacuum. Combining the operating range and the adjustable static offset, it is possible to deform a flat mirror from −65 mD to −385 mD. The measured bandwidth of the actuator and driver electronics is 6.8 Hz. The scattering into higher-order modes is measured to be <0.2% over the nominal beam radius. These piezo-deformable mirrors meet the stringent noise and vacuum requirements of advanced LIGO and will be used for the next observing run (O4) to control the mode-matching between the squeezer and the interferometer.Varun Srivastava, Georgia Mansell, Camille Makarem, Minkyun Noh, Richard Abbott, Stefan Ballmer, GariLynn Billingsley, Aidan Brooks, Huy Tuong Cao, Peter Fritschel, Don Griffith, Wenxuan Jia, Marie Kasprzack, Myron MacInnis, Sebastian Ng, Luis Sanchez, Calum Torrie, Peter Veitch, and Fabrice Matichar

Angiotensin-converting enzyme I/D polymorphism and preeclampsia risk: evidence of small-study bias

BACKGROUND: Inappropriate activation of the renin-angiotensin system may play a part in the development of preeclampsia. An insertion/deletion polymorphism within the angiotensin-I converting enzyme gene (ACE-I/D) has shown to be reliably associated with differences in angiotensin-converting enzyme (ACE) activity. However, previous studies of the ACE-I/D variant and preeclampsia have been individually underpowered to detect plausible genotypic risks. METHODS AND FINDINGS: A prospective case-control study was conducted in 1,711 unrelated young pregnant women (665 preeclamptic and 1,046 healthy pregnant controls) recruited from five Colombian cities. Maternal blood was obtained to genotype for the ACE-I/D polymorphism. Crude and adjusted odds ratio (OR) and 95% confidence interval (CI) using logistic regression models were obtained to evaluate the strength of the association between ACE-I/D variant and preeclampsia risk. A meta-analysis was then undertaken of all published studies to February 2006 evaluating the ACE-I/D variant in preeclampsia. An additive model (per-D-allele) revealed a null association between the ACE-I/D variant and preeclampsia risk (crude OR = 0.95 [95% CI, 0.81-1.10]) in the new case-control study. Similar results were obtained after adjusting for confounders (adjusted per-allele OR = 0.90 [95% CI, 0.77-1.06]) and using other genetic models of inheritance. A meta-analysis (2,596 cases and 3,828 controls from 22 studies) showed a per-allele OR of 1.26 (95% CI, 1.07-1.49). An analysis stratified by study size showed an attenuated OR toward the null as study size increased. CONCLUSIONS: It is highly likely that the observed small nominal increase in risk of preeclampsia associated with the ACE D-allele is due to small-study bias, similar to that observed in cardiovascular disease. Reliable assessment of the origins of preeclampsia using a genetic approach may require the establishment of a collaborating consortium to generate a dataset of adequate size

First narrow-band search for continuous gravitational waves from known pulsars in advanced detector data

Spinning neutron stars asymmetric with respect to their rotation axis are potential sources of continuous gravitational waves for ground-based interferometric detectors. In the case of known pulsars a fully coherent search, based on matched filtering, which uses the position and rotational parameters obtained from electromagnetic observations, can be carried out. Matched filtering maximizes the signalto- noise (SNR) ratio, but a large sensitivity loss is expected in case of even a very small mismatch between the assumed and the true signal parameters. For this reason, narrow-band analysis methods have been developed, allowing a fully coherent search for gravitational waves from known pulsars over a fraction of a hertz and several spin-down values. In this paper we describe a narrow-band search of 11 pulsars using data from Advanced LIGO’s first observing run. Although we have found several initial outliers, further studies show no significant evidence for the presence of a gravitational wave signal. Finally, we have placed upper limits on the signal strain amplitude lower than the spin-down limit for 5 of the 11 targets over the bands searched; in the case of J1813-1749 the spin-down limit has been beaten for the first time. For an additional 3 targets, the median upper limit across the search bands is below the spin-down limit. This is the most sensitive narrow-band search for continuous gravitational waves carried out so far

A Cryogenic Silicon Interferometer for Gravitational-wave Detection

The detection of gravitational waves from compact binary mergers by LIGO has opened the era of gravitational wave astronomy, revealing a previously hidden side of the cosmos. To maximize the reach of the existing LIGO observatory facilities, we have designed a new instrument able to detect gravitational waves at distances 5 times further away than possible with Advanced LIGO, or at greater than 100 times the event rate. Observations with this new instrument will make possible dramatic steps toward understanding the physics of the nearby Universe, as well as observing the Universe out to cosmological distances by the detection of binary black hole coalescences. This article presents the instrument design and a quantitative analysis of the anticipated noise floor