Optical alignment of electrodes on electrical discharge machines

Shadowgraph system projects magnified image on screen so that alignment of small electrodes mounted on electrical discharge machines can be corrected and verified. Technique may be adapted to other machine tool equipment where physical contact cannot be made during inspection and access to tool limits conventional runout checking procedures

Criteria for beach nourishment: biological guidelines for sabellariid worm reef

It has been the purpose of this project to provide the basic biological and geological data together with summary guidelines which will allow the Florida Dept. of Environmental Regulation and project engineers to make the necessary permitting and design decisions for beach nourishment project in worm reef areas. The present work seeks to determine the tolerance of P. lapidosa to sediment burial, the tolerance of these organisms to exposure to hydrogen sulfide, the tolerances of these organisms to heavy silt loads in the water, etc. (37pp.

Optical machine tool alignment indicator Patent

Optical gauging system for monitoring machine tool alignmen

Influence of temperature and the role of chromium on the kinetics of sulfidation of 310 stainless steel

The sulfidation of 310 stainless steel was studied over the temperature range from 910 K to 1285 K. By adjusting the ratio of hydrogen sulfide, variations in sulfur potential were obtained. The effect of temperature on sulfidation was determined at three different sulfur potentials: 39/sqNm, 0.014/sqNm, and 0.00015/sqNm. All sulfide scales contained one or two surface layers in addition to a subscale. The second outer layer (OL-II), furthest from the alloy, contained primarily Fe-Ni-S. The first outer layer (OL-I), nearest the subscale, contained FE-Cr-S. The subscale consisted of sulfide inclusions in the metal matrix. At a given temperature and sulfur potential, the weight gain data obeyed the parabolic rate law after an initial transient period. The parabolic rate constants obtained at the sulfur potential of 39/sqNm did not show a break when the logarithm of the rate constant was plotted as a function of the inverse of absolute temperature. Sulfidation carried out at sulfur potentials below 0.02/sqNm, however, did show a break at 1145 K, which is termed as the transition temperature. This break was found to be associated with the changes which had occurred in the Fe:Cr ratio of OL-I. Below the transition temperature the activation energy was found to be approximately 125 kj/mole. Above the transition temperature the rate of sulfidation decreased with temperature but dependent on the Fe:Cr ratio in the iron-chromium-sulfide layers of the OL-I. A reaction mechanism consistent with the experimental results has been proposed

Sulfidation of 310 stainless steel at sulfur potentials encountered in coal conversion systems

The sulfidation of SAE 310 stainless steel was carried out in gas mixtures of hydrogen and hydrogen sulfide over a range of sulfur potentials anticipated in advanced coal gasification processes. The kinetics, composition, and morphology of sulfide scale formation were studied at a fixed temperature of 1,065 K over a range of sulfur potentials from .00015 Nm to the -2nd power to 900 Nm to the -2nd power. At all sulfur potentials investigated, the sulfide scales were found to be multilayered. The relative thickness of the individual layers as well as the composition was found to depend on the sulfur potential. The reaction was found to obey the parabolic rate law after an initial transient period. Considerably longer transient periods were found to be due to unsteady state conditions resulting from compositional variations in the spinel layer. The sulfur pressure dependence on the parabolic rate constant was found to best fit the equation K sub p equals const. (P sub S2) to the 1/nth power, where n equals 3.7. The growth of the outer layers was found to be primarily due to the diffusion of metal ions, iron being the predominant species. The inner layer growth was due to the dissociation of the primary product at the alloy scale interface and depended on the activity of chromium

Thermoanalysis of ablation materials

Thermal analysis on pyrolysis of charring ablator material

Progress in Electroweak Baryogenesis

Recent work on generating the excess of matter over antimatter in the early universe during the electroweak phase transition is reviewed.Comment: 50 pages (figures on request), uses harvmac (table of contents correct for "l" format), UCSD-93-2,BU-HEP-93-

Radiation counting technique allows density measurement of metals in high-pressure/ high-temperature environment

Radioactive tracers induced by neutron irradiation provide a gamma ray flux proportional to the density of a metal, allowing density measurement of these metals in extreme high-temperature and high-pressure environments. This concept is applicable to most metals, as well as other substances