Two-phase refrigerant distribution in a parallel flow minichannel heat exchanger having lower combining/dividing header

Brazed aluminum heat exchangers are recently considered as evaporators of automotive or residential air conditioners. In this case, it is very important to distribute the two-phase refrigerant (especially the liquid) evenly into each tube. In this study, R-410A distribution in a two pass evaporator with upper horizontal combining-dividing header was investigated. Tubes were heated to yield a test section outlet superheat of 5oC with inlet quality of 0.2. The number of tubes was 10 for the inlet pass and 12 or 14 for the outlet pass. For each case, mass flux was varied from 73 kg/m2s to 143 kg/m2s. In the combining/dividing header, two-phase mixture out of the inlet pass is first merged and then re-distributed to the outlet pass. More liquid is forced downstream as mass flux or quality increases yielding better flow distribution. Effect of insertion device in the inlet header was also investigated. Efforts were made to develop correlations to predict the liquid or gas distribution in a header with limited success. Header pressure drop data are also provided.Papers presented to the 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Costa de Sol, Spain on 11-13 July 2016

The prenylated rab GTPase receptor PRA1.F4 contributes to protein exit from the golgi apparatus

Prenylated Rab acceptor1 (PRA1) functions in the recruitment of prenylated Rab proteins to their cognate organelles. Arabidopsis (Arabidopsis thaliana) contains a large number of proteins belonging to the AtPRA1 family. However, their physiological roles remain largely unknown. Here, we investigated the physiological role of AtPRA1.F4, a member of the AtPRA1 family. A T-DNA insertion knockdown mutant of AtPRA1.F4, atpra1.f4, was smaller in stature than parent plants and possessed shorter roots, whereas transgenic plants overexpressing HA:AtPRA1.F4 showed enhanced development of secondary roots and root hairs. However, both overexpression and knockdown plants exhibited increased sensitivity to high-salt stress, lower vacuolar Na+/K+-ATPase and plasma membrane ATPase activities, lower and higher pH in the vacuole and apoplast, respectively, and highly vesiculated Golgi apparatus. HA:AtPRA1.F4 localized to the Golgi apparatus and assembled into high-molecular-weight complexes. atpra1.f4 plants displayed a defect in vacuolar trafficking, which was complemented by low but not high levels of HA:AtPRA1.F4. Overexpression of HA:AtPRA1.F4 also inhibited protein trafficking at the Golgi apparatus, albeit differentially depending on the final destination or type of protein: trafficking of vacuolar proteins, plasma membrane proteins, and trans-Golgi network (TGN)-localized SYP61 was strongly inhibited; trafficking of TGN-localized SYP51 was slightly inhibited; and trafficking of secretory proteins and TGN-localized SYP41 was negligibly or not significantly inhibited. Based on these results, we propose that Golgi-localized AtPRA1.F4 is involved in the exit of many but not all types of post-Golgi proteins from the Golgi apparatus. Additionally, an appropriate level of AtPRA1.F4 is crucial for its function at the Golgi apparatus. ? 2017 American Society of Plant Biologists. All rights reserved.111Ysciescopu

Metastatic cutaneous squamous cell carcinoma to the parotid: Adjuvant radiotherapy and treatment outcomes

Introduction: Adjuvant radiotherapy is an established component in the management of metastatic cutaneous squamous cell carcinoma (SCC) involving the parotid gland. Radiotherapy technique, dose and volumes are seldom described sufficiently to allow close examination. We report our treatment outcomes and focus on treatment-related factors that affect outcomes in this cohort. Methods: We performed a retrospective review of patients with metastatic cutaneous SCCs who underwent parotidectomy with or without ipsilateral neck dissection. All patients received adjuvant radiotherapy. Demographics, clinical data and treatment details were collected from an intuitional electronic database. Individual patient-level radiotherapy technique, volumes and doses were reviewed. Results: Between July 2008 and July 2018, 60 patients met our inclusion criteria. Median follow-up duration was 32.7 months. The mean age was 66.4 years. The majority of patients (49 patients) received full neck irradiation. The 2-year and 5-year loco-regional failure-free survival was 87% (95% confidence interval (CI): 0.74–0.93) and 71% (95% CI: 0.52, 0.83), respectively. The 2-year and 5-year overall survival was 76% (95% CI: 0.62, 0.85) and 60% (95% CI: 0.45, 0.72), respectively. There were 15 cases of loco-regional failures, with 6 cases with dermal involvement. Lymphovascular invasion (LVI) was associated with higher loco-regional failure (hazard ratio: 8.43, 95% CI: 1.85–38.39, P = 0.005) and cancer-specific mortality (hazard ratio: 5.40, 95% CI: 1.40–20.87, P = 0.015). Treatment technique, intensity-modulated radiation therapy (IMRT) vs 3D conformal radiotherapy (3D CRT), bolus use, perineural invasion (PNI) and surgical margins were not significantly associated with loco-regional failure. Conclusion: We demonstrated high loco-regional control rates with routine use of comprehensive adjuvant radiotherapy. The presence of LVI was identified as a strong predictor for recurrence. Further analysis will help to define optimal radiation dose and techniques

Con-Ca2+-tenating plant immune responses via calcium-permeable cation channels

Calcium serves as a second messenger in a variety of developmental and physiological processes and has long been identified as important for plant immune responses. We discuss recent discoveries regarding plant immune-related calcium-permeable channels and how the two intertwined branches of the plant immune system are intricately linked to one another through calcium signalling. Cell surface immune receptors carefully tap the immense calcium gradient that exists between apoplast and cytoplasm in a short burst via tightly regulated plasma membrane (PM)-resident cation channels. Intracellular immune receptors form atypical calcium-permeable cation channels at the PM and mediate a prolonged calcium influx, overcoming the deleterious influence of pathogen effectors and enhancing plant immune responses

Comments on Noncommutative ADHM Construction

We extend the method of matrix partition to obtain explicitly the gauge field for noncommutative ADHM construction in some general cases. As an application of this method we apply it to the U(2) 2-instanton and get explicit result for the gauge fields in the coincident instanton limit. We also easily apply it to the noncommutative 't Hooft instantons in the appendix.Comment: 17 pages, LaTeX; an appendix added, typos corrected, refs adde

Status of and performance estimates for QCDOC

QCDOC is a supercomputer designed for high scalability at a low cost per node. We discuss the status of the project and provide performance estimates for large machines obtained from cycle accurate simulation of the QCDOC ASIC.Comment: 3 pages 1 figure. Lattice2002(machines

Flux Creep and Flux Jumping

We consider the flux jump instability of the Bean's critical state arising in the flux creep regime in type-II superconductors. We find the flux jump field, $B_j$, that determines the superconducting state stability criterion. We calculate the dependence of $B_j$ on the external magnetic field ramp rate, $\dot B_e$. We demonstrate that under the conditions typical for most of the magnetization experiments the slope of the current-voltage curve in the flux creep regime determines the stability of the Bean's critical state, {\it i.e.}, the value of $B_j$. We show that a flux jump can be preceded by the magneto-thermal oscillations and find the frequency of these oscillations as a function of $\dot B_e$.Comment: 7 pages, ReVTeX, 2 figures attached as postscript file

Hardware and software status of QCDOC

QCDOC is a massively parallel supercomputer whose processing nodes are based on an application-specific integrated circuit (ASIC). This ASIC was custom-designed so that crucial lattice QCD kernels achieve an overall sustained performance of 50% on machines with several 10,000 nodes. This strong scalability, together with low power consumption and a price/performance ratio of $1 per sustained MFlops, enable QCDOC to attack the most demanding lattice QCD problems. The first ASICs became available in June of 2003, and the testing performed so far has shown all systems functioning according to specification. We review the hardware and software status of QCDOC and present performance figures obtained in real hardware as well as in simulation.Comment: Lattice2003(machine), 6 pages, 5 figure

Fabrication of FeSe1-x superconducting films with bulk properties

We have fabricated high-quality FeSe1-x superconducting films with a bulk Tc of 11-12 K on different substrates, Al2O3(0001), SrTiO3(100), MgO(100), and LaAlO3(100), by using a pulsed laser deposition technique. All the films were grown at a high substrate temperature of 610 oC, and were preferentially oriented along the (101) direction, the latter being to be a key to fabricating of FeSe1-x superconducting thin films with high Tc. According to the energy dispersive spectroscopy data, the Fe:Se composition ratio was 1:0.90+-0.02. The FeSe1-x film grown on a SrTiO3 substrate showed the best quality with a high upper critical magnetic field [Hc2(0)] of 56 T