A finite element solver for 3-D compressible viscous flows

Computation of the flow field inside a space shuttle main engine (SSME) requires the application of state of the art computational fluid dynamic (CFD) technology. Several computer codes are under development to solve 3-D flow through the hot gas manifold. Some algorithms were designed to solve the unsteady compressible Navier-Stokes equations, either by implicit or explicit factorization methods, using several hundred or thousands of time steps to reach a steady state solution. A new iterative algorithm is being developed for the solution of the implicit finite element equations without assembling global matrices. It is an efficient iteration scheme based on a modified nonlinear Gauss-Seidel iteration with symmetric sweeps. The algorithm is analyzed for a model equation and is shown to be unconditionally stable. Results from a series of test problems are presented. The finite element code was tested for couette flow, which is flow under a pressure gradient between two parallel plates in relative motion. Another problem that was solved is viscous laminar flow over a flat plate. The general 3-D finite element code was used to compute the flow in an axisymmetric turnaround duct at low Mach numbers

EFFICIENCY AND PRODUCTIVITY GROWTH IN INDIAN BANKING

This paper attempts to examine technical efficiency and productivity performance of Indian scheduled commercial banks, for the period 1979-2008. We model a multiple output/multiple input technology production frontier using semiparametric estimation methods. The endogenity of multiple outputs is addressed by semi parametric estimates in part by introducing multivariate kernel estimators for the joint distribution of the multiple outputs and correlated random effects. Output is measured as the rupee value of total loans and total investments at the end of the year. The estimates provide robust inferences of the productivity and efficiency gains due to economic reforms.Banking, Frontier efficiency, Productivity

Ethnomedicinal Observations Among the Kondareddis of Khammam District, Andhra Pradesh, India

Ethnomedicinal information of Kondareddis has been collected from Khammam district of Andhra Pradesh, India during 2006-2008. A total of 40 plant species belonging to 39 genera and 31 families were used in traditional medicine to heal different diseases. The present work is an attempt to identify and conserve the medicinal plants in Khammam district. The study shows a high degree of ethnobotanical novelty and the use of plants among the Kondareddis reflects the revival of interest in traditional folk culture

Ethnobotanical Survey on Respiratory Disorders in Eastern Ghats of Andhra Pradesh, India

An Ethnopharmacological survey of the Eastern Ghats region of Andhra Pradesh, comprising Chittoor, Cuddapah, East Godavari, Guntur, Khammam, Krishna, Kurnool, Srikakulam, Visakhapatnam, Vijayanagaram and the West Godavari districts, was conducted during 2000-2005. Eighty-four species of folk drug plants belonging to 72 genera and 41 families were found to be used as a remedy for respiratory disorders by the rural people and forest ethnic people (Chenchus, Erukulas, Lambadas, Koyas, Kondareddies, Nukadoras, Yanadis). The scientific, vernacular and family names of these medicinal plants, along with the parts used and the mode of their administration are enumerated

X-ray properties of UV-selected star forming galaxies at z~1 in the Hubble Deep Field North

We present an analysis of the X-ray emission from a large sample of ultraviolet (UV) selected, star forming galaxies with 0.74<z<1.32 in the Hubble Deep Field North (HDF-N) region. By excluding all sources with significant detected X-ray emission in the 2 Ms Chandra observation we are able to examine the properties of galaxies for which the emission in both UV and X-ray is expected to be predominantly due to star formation. Stacking the X-ray flux from 216 galaxies in the soft and hard bands produces significant detections. The derived mean 2-10 keV rest-frame luminosity is 2.97+/-0.26x10^(40) erg/s, corresponding to an X-ray derived star formation rate (SFR) of 6.0+/-0.6 Msolar/yr. Comparing the X-ray value with the mean UV derived SFR, uncorrected for attenuation, we find that the average UV attenuation correction factor is \~3. By binning the galaxy sample according to UV magnitude and colour, correlations between UV and X-ray emission are also examined. We find a strong positive correlation between X-ray emission and rest-frame UV emission. A correlation between the ratio of X-ray-to-UV emission and UV colour is also seen, such that L(X)/L(UV) increases for redder galaxies. Given that X-ray emission offers a view of star formation regions that is relatively unaffected by extinction, results such as these can be used to evaluate the effects of dust on the UV emission from high-z galaxies. For instance we derive a relationship for estimating UV attenuation corrections as a function of colour excess. The observed relation is inconsistent with the Calzetti et al. (2000) reddening law which over predicts the range in UV attenuation corrections by a factor of ~100 for the UV selected z~1 galaxies in this sample (abridged).Comment: 10 pages, 7 figures, accepted for publication in MNRA

Plants Used in Ethnoveterinary Practices by Koyas of Pakhal Wildlife Sanctuary, Andhra Pradesh, India

The paper deals with the 21 medicinal plant species used in ethnoveterinary practices by Koya tribes inhabiting in the Pakhal Wildlife Sanctuary, Warangal district, Andhra Pradesh, India

EVALUATION OF ANTI-DIABETIC POTENTIAL OF IXORA PAVETTAIN STREPTOZOTOCIN INDUCED DIABETIC RATS

Objective: Evaluation of anti-diabetic potential ofIxorapavetta in streptozotocin induced diabetic ratsMethods: Diabetes was induced by thesingle dose of streptozotocin (65 mg/kg body weight i. p.) to female Wistarrats. Diabetic rats were stabilized for six day and from seventh day butenolic fraction of Ixorapavetta(BIP) was administered at a dose of 250 mg/kg, p. o. and 500 mg/kg for 3 weeks. Glibenclamide 10 mg/kg P. O. was used as a standard. The effects of BIP and standard drug on following parameters were recorded - body weight, blood glucose and various biochemical parameters like serum lipid profile eg. total cholesterol (TC) and triglyceride (TG), HDL-C, LDL-C and VLDL. At the end of the study oxidative stress markers like CAT, GSH, and lipid peroxidation were analyzed in the pancreases. Histopathological changes were studied in pancreases of representative animals of the each group.Results: Administration of butenolic fractionof Ixorapavetta(BIP) at a dose of 250 mg/kg, p. o. and 500 mg/kg, p. o did not show any significant change in blood glucose level of normoglycemic rats, whereas, oral glucose tolerance test depicted significant (P&lt;0.001) reduction in blood glucose level at 30 to 60 min. In streptozotocininduced diabetic rats, BIP was found significantly beneficial in controlling elevated blood glucose level and serum lipid parameters. The findings were strengthening by improved antioxidant status in diabetic rats as well as protection towards pathological damage of pancreases. The results showed by 500 mg/kg of butenol fractionof Ixorapavettawere comparable with standard treatment of Glibenclamide 10 mg/kg.Conclusion: Butenolfractionof Ixorapavettapossessanti-diabetic action in streptozotocin induced diabetic rats.Â

The Stability of Strange Star Crusts and Strangelets

We construct strangelets, taking into account electrostatic effects, including Debye screening, and arbitrary surface tension sigma of the interface between vacuum and quark matter. We find that there is a critical surface tension sigma_crit below which large strangelets are unstable to fragmentation and below which quark star surfaces will fragment into a crystalline crust made of charged strangelets immersed in an electron gas. We derive a model-independent relationship between sigma_crit and two parameters that characterize any quark matter equation of state. For reasonable model equations of state, we find sigma_crit typically of order a few MeV/fm^2. If sigma <= sigma_crit, the size-distribution of strangelets in cosmic rays could feature a peak corresponding to the stable strangelets that we construct.Comment: 11 pages, LaTe

Smart Wall Painting System

The objective of this paper is to outline a smart wall painting system for little and medium scale operations. These days robots are broadly utilized as a part of relatively every application like medicinal application, amusement, military, production lines vehicle businesses, and so on. However, the utilization of robot is as yet not generally utilized as a part of constructional work. Robots are fundamentally design to build speed and maximize accuracy of construction field work. The basic point of the paper is to design, develop and actualize Remote Operated Wall Painting Machine which helps for accomplishing painting hardware requiring little to no effort because of which the sketch work can be effectively done proficiently and in particular at extremely ostensible cost. The painting machine keeps away from coordinate contact of chemicals which can be harmful to the human painters, for example, eye, skin and respiratory system issues.. Besides that the idea of painting method that requires rehashed work time and hand rising make it physical torment, and exertion devouring. Moreover, it would offer the chance to decrease or take out human introduction to troublesome and dangerous worked system conditions, which would take care of a large portion of the issues associated with security when numerous activities happen in the meantime. This machine is is easy to operate and no need of labour required to operate effectively. At the point when development specialists and robots are appropriately coordinated in building tasks,the entire development process can be better overseen and savings in human work and timing are acquired as an outcome. wall painting is a redundant, debilitating and risky process which makes it a perfect case for automation. Painting had been mechanized in car industry however not yet for the development business. There is a strong requirement for a portable robot that can move to paint walls of buildings. In this paper, the conceptual plan of a an autonomous wall painting robot is portrayed comprising of an arm that sweeps the dividers vertically and is fitted on a versatile robot base to give the lateral feed movement to cover the painting area. The design objective is to fulfill the criteria of straight forwardness, low weight, ease and quick painting time. Ultrasonic sensors are fitted on the arm and the portable base to alter as far as possible and move in the room territory. A control system is intended to direct the arm movement and plan the versatile base movement