Design of dualband antenna for RFID applications

This paper focuses on the design and fabrication of dual band antenna for UHF RFID and ISM RFID applications. The U-shaped patch loaded with dipole is introduced and investigated. The antenna can be performed dual-band frequencies at 0.915 GHz and 2.4 GHz required in RFID applications with reflection coefficient is less than -10 dB. The lower band can be varied by adjusting both dipole arms length and upper band is tuned by U-shaped patches. The gains of the design with a size 130   45  1.6 mm3  are performed 1.89 dB and 3.65 dB for single and dual band respectively. This compact and low cost dual band antenna also performed total efficiency greater than 80%. The design methodology and antenna measurement results are both presented and discussed in this letter

Dampak Hasil Pelatihan Kecakapan Hidup Bagi Pemuda Di Desa Paris

Penelitian ini bertujuan untuk mengetahui Dampak Hasil Pelatihan Kecakapan Hidup Bagi Pemuda Pengangguran di Desa Paris Kecamatan Mootilango. Jenis penelitian ini menggunakan penelitian kualitatif deskriptif, dan teknik pengumpulan data menggunakan teknik observasi, wawancara dan dokumentasi. Hasil penelitian yang didapatkan terkait dengan pelatihan kecakapan hidup di Desa Paris Kecamatan Mootilango sebagai berikut, pertama pelaksanaan pelatihan kecakapan hidup sangat bermanfaat dan dibutuhkan oleh pemuda yang ingin mendapatkan lapangan pekerjaan ataupun mengembangkan usahanya. Kedua setelah pemuda mengikuti pelatihan kecakapan hidup terjadi perubahan mencakup pengetahuan, sikap dan keterampilan yang sangat mendukung proses pelatihan. Ketiga dampak dari pelatihan kecakapan hidup menunjukkan dampak positif yaitu pemuda dapat bekerja secara mandiri dan berkelompok, memanfaatkan pengetahuan yang dimiliki untuk memperoleh usaha

Analysis of Concentric Split Ring Square Element for Broadband Reflectarray Antenna

An investigation of phase variation and phase range of concentric split ring square element for broadband reflectarray antenna is presented in this paper. This is realized by exploiting the physical geometry of three element shapes namely square element, concentric ring square element and concentric split ring square element. Modifying the current distribution of basic concentric ring square element, leads to a less steep phase variation and also the bandwidth performance. An analysis of frequency response is described and analysed. The physical interpretation of the elements is also discussed. The proposed antenna element effectively covers two frequency operations (13.44 GHz and 18.36 GHz) in Ku-band range. Bandwidth broadening is achieved by introducing the ring square combination of element and the practical phase range is achieved through the use of RF 35 (thickness = 1.524 mm) as the substrate. The new concept of split initiates to a wider bandwidth (up to 67.6 %) for the antenna and can applied to any two frequency operations of Ku-band applications

Offset-fed UWB antenna with multi-slotted ground plane

This paper presents the design and results of an offset feed Ultrawideband(UWB) antenna with a multiple-slotted ground plane. The antenna consists of a square shaped radiator, a feed slightly offset from the middle along the radiator side and a ground plane with multiple rectangular slots. Simulation results show that the antenna can achieve a wide bandwidth from 3.3 to 18 GHz. © 2011 IEEE.published_or_final_versionThe 2011 International Workshop on Antenna Technology (iWAT), Hong Kong, China, 7-9 March 2011. In Proceedings of iWAT, 2011, p. 432-43

Verifikasi Desain Antena Berbasis Dipol Berbentuk V untuk Pengamatan Garis 21 Cm

21 cm adalah salah satu garis emisi penting didalam astronomi radio. Garis ini umumnya digunakan untuk mempelajari karakteristik galaksi-galaksi. Artikel ini mempresentasikan sebuah antena dipol berbentuk V untuk sistem telekop radio 21 cm, yang berkorespondensi dengan frekuensi pengamatan 1420MHz. Designnya telah diimplementasikan dan diukur. Hasil pengukuran memperlihatkan kesesuaian dengan simulasi, dengan eror frekuensi puncak sebesar 0,7%. SWR yang diperoleh juga cukup rendah, yaitu sekitar 1,14. Antena yang diajukan pada artikel ini berpotensi untuk digunakan sebagai feed pada antena reflektor atau sebagai elemen penyusun pada sebuah sistem antena array

A Dual Band Slotted Patch Antenna on Dielectric Material Substrate

A low profile, compact dual band slotted patch antenna has been designed using finite element method-based high frequency full-wave electromagnetic simulator. The proposed antenna fabricated using LPKF printed circuit board (PCB) fabrication machine on fiberglass reinforced epoxy polymer resin material substrate and the performance of the prototype has been measured in a standard far-field anechoic measurement chamber. The measured impedance bandwidths of (reflection coefficient <-10 dB) 12.26% (14.3–16.2 GHZ), 8.24% (17.4–18.9 GHz), and 3.08% (19.2–19.8) have been achieved through the proposed antenna prototype. 5.9 dBi, 3.37 dBi, and 3.32 dBi peak gains have been measured and simulated radiation efficiencies of 80.3%, 81.9%, and 82.5% have been achieved at three resonant frequencies of 15.15 GHz, 18.2 GHz, and 19.5 GHz, respectively. Minimum gain variation, symmetric, and almost steady measured radiation pattern shows that the proposed antenna is suitable for Ku and K band satellite applications

Development of Ray Tracing Algorithms for Scanning Plane and Transverse Plane Analysis for Satellite Multibeam Application

Reflector antennas have been widely used in many areas. In the implementation of parabolic reflector antenna for broadcasting satellite applications, it is essential for the spacecraft antenna to provide precise contoured beam to effectively serve the required region. For this purpose, combinations of more than one beam are required. Therefore, a tool utilizing ray tracing method is developed to calculate precise off-axis beams for multibeam antenna system. In the multibeam system, each beam will be fed from different feed positions to allow the main beam to be radiated at the exact direction on the coverage area. Thus, detailed study on caustics of a parabolic reflector antenna is performed and presented in this paper, which is to investigate the behaviour of the rays and its relation to various antenna parameters. In order to produce accurate data for the analysis, the caustic behaviours are investigated in two distinctive modes: scanning plane and transverse plane. This paper presents the detailed discussions on the derivation of the ray tracing algorithms, the establishment of the equations of caustic loci, and the verification of the method through calculation of radiation pattern

Local application of osteoprotegerin-chitosan gel in critical-sized defects in a rabbit model

Background Osteoprotegerin (OPG) is used for the systemic treatment of bone diseases, although it has many side effects. The aim of this study was to investigate a newly formulated OPG-chitosan gel for local application to repair bone defects. Recent studies have reported that immunodetection of osteopontin (OPN) and osteocalcin (OC) can be used to characterise osteogenesis and new bone formation. Methods The osteogenic potential of the OPG-chitosan gel was evaluated in rabbits. Critical-sized defects were created in the calvarial bone, which were either left unfilled (control; group I), or filled with chitosan gel (group II) or OPG-chitosan gel (group III), with rabbits sacrificed at 6 and 12 weeks. Bone samples from the surgical area were decalcified and treated with routine histological and immunohistochemical protocols using OC, OPN, and cathepsin K (osteoclast marker) antibodies. The toxicity of the OPG-chitosan gel was evaluated by biochemical assays (liver and kidney function tests). Results The mean bone growth in defects filled with the OPG-chitosan gel was significantly higher than those filled with the chitosan gel or the unfilled group (p < 0.05). At 6 and 12 weeks, the highest levels of OC and OPN markers were found in the OPG-chitosan gel group, followed by the chitosan gel group. The number of osteoclasts in the OPG-chitosan gel group was lower than the other groups. The results of the liver and kidney functional tests indicated no signs of harmful systemic effects of treatment. In conclusion, the OPG-chitosan gel has many characteristics that make it suitable for bone repair and regeneration, highlighting its potential benefits for tissue engineering applications