Kinetics and mechanism of synthetic CoS oxidation process

The results of investigation of kinetics and mechanism for synthetic a-CoS oxidation process are presented in this paper. Based on experimental data obtained using DTA and XRD analysis and constructed PSD diagrams for Co-S-O system, mechanism of synthetic a-CoS oxidation process is suggested. Characteristic kinetic parameters were obtained for experimental isothermal investigations of desulfurization degree using Sharp method

EXAMPLES OF LCA METHODOLOGY IMPLEMENTATION IN STEEL INDUSTRY

Steel industry kept pace with actual trends for environmental protection in many ways – through different technological improvements considering environment protection, important share of recycling in the steel production, design of so called “eco-steels”, materials designed according to recent environmental directives and legislatives, etc. In the frame of steel production monitoring, LCA methodology is very important for obtaining an accurate environmental picture of a process, due to the fact that the process should be evaluated over its entire life cycle. A number of tools and methodologies have been developed in recent years to assess the potential environmental impacts associated with a product, process or activity during its entire life cycle. The examples of Life Cycle Assessment (LCA) are used by large steel industrial companies as potentially helpful tool for improving the production processes, efficiency of resource utilization and significantly reduction of waste generation and emissions are presented in this paper

Assessment of the geometric quality of sentinel-2 data

High resolution (10 m and 20 m) optical imagery satellite Sentinel-2 brings a new perspective to Earth observation. Its frequent revisit time enables monitoring the Earth surface with high reliability. Since Sentinel-2 data is provided free of charge by the European Space Agency, its mass use for variety of purposes is expected. Quality evaluation of Sentinel-2 data is thus necessary. Quality analysis in this experiment is based on comparison of Sentinel-2 imagery with reference data (orthophoto). From the possible set of features to compare (point features, texture lines, objects, etc.) line segments were chosen because visual analysis suggested that scale differences matter least for these features. The experiment was thus designed to compare long line segments (e.g. airstrips, roads, etc.) in both datasets as the most representative entities. Edge detection was applied to both images and corresponding edges were manually selected. The statistical parameter which describes the geometrical relation between different images (and between datasets in general) covering the same area is calculated as the distance between corresponding curves in two datasets. The experiment was conducted for two different test sites, Austria and Serbia. From 21 lines with a total length of ca. 120 km the average offset of 6.031 m (0.60 pixel of Sentinel-2) was obtained for Austria, whereas for Serbia the average offset of 12.720 m (1.27 pixel of Sentinel-2) was obtained out of 10 lines with a total length of ca. 38 km

Model savremenog sistema finansiranja na primeru islamskog bankarstva

nem

Refinement of Individual Tree Detection Results Obtained from Airborne Laser Scanning Data for a Mixed Natural Forest

Numerous semi- and fully-automatic algorithms have been developed for individual tree detection from airborne laser-scanning data, but different rates of falsely detected treetops also accompany their results. In this paper, we proposed an approach that includes a machine learning-based refinement step to reduce the number of falsely detected treetops. The approach involves the local maxima filtering and segmentation of the canopy height model to extract different segment-level features used for the classification of treetop candidates. The study was conducted in a mixed temperate forest, predominantly deciduous, with a complex topography and an area size of 0.6 km × 4 km. The classification model’s training was performed by five machine learning approaches: Random Forest (RF), Extreme Gradient Boosting, Artificial Neural Network, the Support Vector Machine, and Logistic Regression. The final classification model with optimal hyperparameters was adopted based on the best-performing classifier (RF). The overall accuracy (OA) and kappa coefficient (κ) obtained from the ten-fold cross validation for the training data were 90.4% and 0.808, respectively. The prediction of the test data resulted in an OA = 89.0% and a κ = 0.757. This indicates that the proposed method could be an adequate solution for the reduction of falsely detected treetops before tree crown segmentation, especially in deciduous forests

Effect оf delamination оn physico-chemical properties оf kaolin

To provide the quality required for its use, raw kaolin must be subjected to certain processing procedures like delamination which is applied to the layered structure materials. The aim of this research is to determine the possibility of performing delamination in the extruder and to estimate the effects of this process on the physico-chemical properties of kaolin. The results showed that delamination can be efficiently realized in the extruder by shearing densely packed layers under the influence of friction force and added Na2 CO3 electrolyte. The crystal structure of the system was thus disrupted. This was confirmed by the Hinckley index (HI) decrease and by the dilatometric characteristics changes during heating. The particle size was reduced and, furthermore, new adsorption centers were formed, which led to an increase in the total cation exchange capacity (CEC). The plasticity of kaolin decreased with the increasing delamination degree, as well as the amount of water required for plastic processing, which is favorable in drying ceramic products

Supplementary material for the article: Pantić, D. N.; Mihajlović-Lalić, L. E.; Aranđelović, S.; Radulović, S.; Grgurić-Šipka, S. Synthesis, Characterization and Cytotoxic Activity of Organoruthenium(II)-Halido Complexes with 5-Chloro-1H-Benzimidazole-2-Carboxylic Acid. Journal of Coordination Chemistry 2019, 72 (5–7), 908–919. https://doi.org/10.1080/00958972.2019.1583332

Supplementary material for: [https://www.tandfonline.com/doi/abs/10.1080/00958972.2019.1583332?journalCode=gcoo20]Related to published version: [http://cherry.chem.bg.ac.rs/handle/123456789/3116

Systematics of c-axis Phonons in the Thallium and Bismuth Based Cuprate Superconductors

We present grazing incidence reflectivity measurements in the far infrared region at temperatures above and below Tc for a series of thallium (Tl2Ba2CuO6, Tl2Ba2CaCu2O8) and bismuth (Bi2Sr2CuO6, Bi2Sr2CaCu2O8, and Bi(2-x)Pb(x)Sr2CaCu2O8) based cuprate superconductors. From the spectra, which are dominated by the c-axis phonons, longitudinal frequencies (LO) are directly obtained. The reflectivity curves are well fitted by a series of Lorentz oscillators. In this way the transverse (TO) phonon frequencies were accurately determined. On the basis of the comparative study of the Bi and Tl based cuprates with different number of CuO2 layers per unit cell, we suggest modifications of the assignment of the main oxygen modes. We compare the LO frequencies in Bi2Sr2CaCu2O8 and Tl2Ba2Ca2Cu3O10 obtained from intrinsic Josephson junction characteristics with our measurements, and explain the discrepancy in LO frequencies obtained by the two different methods.Comment: 8 pages Revtex, 6 eps figures, 3 tables, to appear in Phys. Rev.

Optimizacija mlevenja aktivne komponente i hidrofobizacija dobijenog sredstva za gašenje požara]

This work presents a grinding process of monoammonium phosphate (MAP) as an active component in a powder fire extinguisher (PFE). The aim was to determine the grinding time for reaching the optimal particle size of MAP necessary for permanent fire extinguishing. MAP grinding was performed by using a laboratory ceramic ball mill and a vibrating cup mill. The grinding process was controlled by sieving using a 100 µm sieve at precisely defined time intervals. The efficiency of a PFE depends on the share of the -100 µm fraction of the active component, which has to exceed 60 %. The optimal grain size with 64 % of fraction of particle size -100 µm was obtained after 33 min of grinding of ≈3000 µm mm grain size MAP by using a ball mill (single-stage grinding). In two-stage process, by grinding the same initial MAP sample (≈3000 µm) in the vibro mill for 10 min, powder with the upper limit grain size of 300 µm and the mean grain diameter of 120 µm was obtained. This sample with a reduced size was further ground in the ceramic ball mill yielding 67.5 % of the fraction of particle size -100 µm after 19 min. The total time of the two-stage grinding process was 29 min. By analyzing the grinding time of MAP required to get the lowest required share of the fraction of particle size -100 µm that provides the effectiveness of formed PFE it can be concluded that 64 % of this fraction was obtained after 33 min of single-stage grinding, while only after 26 min in the two-stage process. Thus, the grinding time was reduced by 7 min indicating certain energy savings. Stability and hydrophobicity of the obtained PFE were achieved by coating with magnesium stearate (MgSt) at the content of 2 % in a ball mill for 15 min. The coating was confirmed by the standardized procedure for verification of PFE hydrophobic properties in contact with water drops. To obtained PFE had component mass ratios of MAP:AS:CC:QS:MgSt=55:20:18:5:2 (AS-ammonium sulfate; CC-calcium carbonate, QS-quartz sand) and was further characterized by chemical and granulometric analyses. The fire extinguishing efficiency of the PFE was tested in controlled conditions, whereby fires were initiated by burning solid materials and flammable liquids. In both cases, immediate elimination of flames was achieved, thus proving the efficiency of the PFE obtained in this work for practical applications.U radu je prikazan postupak mlevenja monoamonijum fosfata (MAP) kao aktivne komponente u praškastom sredstvu za gašenje požara (SGP). Cilj je bio da se utvrdi vreme mlevenja MAP koje je potrebno za dobijanje optimalne granulacije za potpuno gašenje požara i eliminisanje plamena. MAP je mleven u laboratorijskom keramičkom mlinu sa kuglama i vibro mlinu sa prstenastim radnim elementima. Proces je kontrolisan prosejavanjem na situ 100 μm. Utvrđeno je da se mlevenjem granula MAP veličine ≈3000 μm u laboratorijskom mlinu sa kuglama optimalna krupnoća od 64 % frakcije čestica veličine -100 μm dobija nakon 33 min mlevenja. Za postizanje iste finoće proizvoda u dvostepenom mlevenju vreme je skraćeno na 26 min (10 min u vibro mlinu i 16 min u mlinu sa kuglama). Stabilnost i hidrofobnost SGP je postignuta oblaganjem magnezijum stearatom (MgSt) pri udelu od 2 % u mlinu sa kuglama u trajanju od 15 min. Efikasnost gašenja je testirana na poligonu u realnim uslovima. Na tačno određenom mestu za testiranje, u kontro-lisanim uslovima, izazvan je požar paljenjem čvrstih materijala i zapaljivih tečnosti. U oba slučaja je došlo do trenutne eliminacije plamena. Na taj način je potvrđena efikasnost formiranog SGP i mogućnost njegove upotrebe u praksi

Synthesis, characterization and cytotoxicity of a palladium(II) complex of 3-[(2-hydroxybenzylidene)amino]-2-thioxoimidazolidin-4-one

The polydentate ligand 3-[(2-hydroxybenzylidene)amino]-2-thioxoimidazolidin-4-one was synthesized in the intermolecular cyclocondensation reaction of 2-hydroxybenzaldehyde thiosemicarbazone and ethyl chloroacetate. A novel palladium(II) complex was obtained from cis-[Pd(DMSO)(2)Cl-2] by nucleophilic substitution of both DMSO ligands with the iminic nitrogen and the thiolactamic sulfur from the ligand. The structures of the compounds were characterized based on their spectral data. The cytotoxic activities of the ligand and the palladium(II) complex were studied on the tumor cell lines: human colon carcinoma HCT-116 and SW-480 cells using the MTT viability test. The results showed that the investigated palladium(II) complex had a significantly greater cytotoxic effect compared to that of the ligand