241 research outputs found
Accurate magnetic sensor system integrated design
Inductive measurement of magnetic fields is a diagnostic technique widely used in several scientific fields, such as magnetically confined fusion, plasma thrusters and particle accelerators, where real time control and detailed characterization of physics phenomena are required. The accuracy of the measured data strongly influences the machine controllability and the scientific results. In the framework of the assembly modifications of the RFX-mod experiment, a complete renew and improvement of the magnetic diagnostic system, from the probes moved inside the vacuum vessel to the integrator modules, has been carried out. In this paper, the whole system making up the magnetic diagnostics is described, following the acquisition chain from the probe to the streamed data and illustrating the requirements and conflicting limitations which affect the different components, in order to provide a comprehensive overview useful for an integrated design of any new systems. The characterization of a prototypical implementation of the whole acquisition chain is presented, focusing on the flexible ADC architecture adopted for providing a purely numerical signal integration, highlighting the advantages that this technology offers in terms of flexibility, compactness and cost effectiveness, along with the limitations found in existing implementation in terms of ADC noise characteristics and their possible solutions
Design of the new electromagnetic measurement system for RFX-mod upgrade
A major modification of the RFX-mod toroidal load assembly has been decided in order to improve passive MHD control and to minimize the braking torque on the plasma, thus extending the operational space in both RFP and Tokamak configurations. With the removal of the vacuum vessel, the support structure will be modified in order to obtain a new vacuum-tight chamber and the first wall tiles will be directly in front of the passive stabilizing shell inside of it, so increasing both the poloidal cross section and the plasma-shell proximity.
This implies the design of a new vacuum fit electromagnetic measurement system. The new local probes will be installed in vacuum onto the copper shell, behind the graphite tiles, and shall operate up to a maximum temperature of 180\ub0C to allow for baking cycles for first wall conditioning. Because of the reduced room available, tri-axial pickup probes have been designed, with the additional advantage of allowing the minimization of alignment errors.
The paper describes the detailed design of the new probe set, in particular highlighting advantages and effectiveness of different probe solutions. Preliminary tests carried out on local probe prototypes to characterize their electromagnetic behaviour are also reported
Complete compensation of criss-cross deflection in a negative ion accelerator by magnetic technique
During 2016, a joint experimental campaign was carried out by QST and Consorzio RFX on the Negative Ion Test Stand (NITS) at the QST Naka Fusion Institute, Japan, with the purpose of validating some design solutions adopted in MITICA, which is the full-scale prototype of the ITER NBI, presently under construction at Consorzio RFX, Padova, Italy. The main purpose of the campaign was to test a novel technique, for suppressing the beamlet criss-cross magnetic deflection. This new technique, involving a set of permanent magnets embedded in the Extraction Grid, named Asymmetric Deflection Compensation Magnets (ADCM), is potentially more performing and robust than the traditional electrostatic compensation methods. The results of this first campaign confirmed the effectiveness of the new magnetic configuration in reducing the criss-cross magnetic deflection. Nonetheless, contrary to expectations, a complete deflection correction was not achieved. By analyzing in detail the results, we found indications that a physical process, taking place just upstream of the plasma grid, was giving an important contribution to the final deflection of the negative ion beam. This process appears to be related to the drift of negative ions inside the plasma source, in the presence of a magnetic field transverse to the extraction direction, and results in a non-uniform ion current density extracted at the meniscus. Therefore, the numerical models adopted in the design were improved by including this previously disregarded effect, so as to obtain a much better matching with the experimental results. Based on the results of the first campaign, new permanent magnets were designed and installed on the Extraction Grid of NITS. A second QST-Consorzio RFX joint experimental campaign was then carried out in 2017, demonstrating the complete correction of the criss-cross deflection and confirming the validity of the novel magnetic configuration and of the hypothesis behind the new models. This contribution presents the results of the second joint experimental campaign on NITS along with the overall data analysis of both campaigns, and the description of the improved models. A general picture is given of the relation among magnetic field, beam energy, meniscus non-uniformity and beamlet deflection, constituting a useful database for the design of future machines
Relationships among internal fat depots and subcutaneous fat in sheep.
The understanding of the relationships among the different adipose tissue depots as well as accurately predicting their masses is critical for animal growth modeling. Thus, the aims of this study were 1) to evaluate the phenotypic correlations among internal fat masses and subcutaneous fat thickness in sheep and 2) to predict the internal total fat mass using KPH fat weight and subcutaneous fat thickness information.Edição dos trabalhos do: ADSA-PSA-AMPA-ASAS-CSAS-WSASAS JOINT ANNUAL MEETING, 2012, Phoenix-AR. Small Ruminant: Production.T370
Produção de silagem de milho em sistemas de integração lavoura pecuária floresta.
Editores técnicos: João de Mendonça Naime, Caue Ribeiro, Maria Alice Martins, Elaine Cristina Paris, Paulino Ribeiro Villas Boas, Ladislau Marcelino Rabello
Vortex dynamics in NbTi films at high frequency and high DC magnetic fields
We report on the characterization of NbTi films at ∼ 11 GHz and in DC magnetic fields up to 4
T, performed by means of the coplanar waveguide resonator technique, providing quantitative
information about the penetration depth, the complex impedance, and the vortex-motion-induced
complex resistivity. This kind of characterization is essential for the development of radiofrequency
cavity technology. To access the vortex-pinning parameters, the complex impedance was analyzed
within the formalism of the Campbell penetration depth. Measurements in this frequency range
allowed us to determine the complete set of vortex-pinning parameters and the flux flow resistivity,
both analyzed and discussed in the framework of high-frequency vortex dynamics models. The
analysis also benefits from the comparison with results obtained by a dielectric-loaded resonator
technique on similar samples and by other ancillary structural and electromagnetic characterization
techniques that provide us with a comprehensive picture of the material. It turns out that the
normalized flux flow resistivity follows remarkably well the trend predicted by the time dependent
Ginzburg-Landau theory, while the pinning constant exhibits a decreasing trend with the field which
points to a collective pinning regime
Forage production intercropped with corn for silage in integrated crop livestock forest systems.
Efeito do veranico da safra 2013/2014 sobre produção de forragem e lotação animal em sistemas agropecuários integrados.
Editores técnicos: João de Mendonça Naime, Caue Ribeiro, Maria Alice Martins, Elaine Cristina Paris, Paulino Ribeiro Villas Boas, Ladislau Marcelino Rabello
Start of SPIDER operation towards ITER neutral beams
Heating Neutral Beam (HNB) Injectors will constitute the main plasma heating and current drive tool both in ITER and JT60-SA, which are the next major experimental steps for demonstrating nuclear fusion as viable energy source. In ITER, in order to achieve the required thermonuclear fusion power gain Q=10 for short pulse operation and Q=5 for long pulse operation (up to 3600s), two HNB injectors will be needed [1], each delivering a total power of about 16.5 MW into the magnetically-confined plasma, by means of neutral hydrogen or deuterium particles having a specific energy of about 1 MeV. Since only negatively charged particles can be efficiently neutralized at such energy, the ITER HNB injectors [2] will be based on negative ions, generated by caesium-catalysed surface conversion of atoms in a radio-frequency driven plasma source. A negative deuterium ion current of more than 40 A will be extracted, accelerated and focused in a multi-aperture, multi-stage electrostatic accelerator, having 1280 apertures (~ 14 mm diam.) and 5 acceleration stages (~200 kV each) [3]. After passing through a narrow gas-cell neutralizer, the residual ions will be deflected and discarded, whereas the neutralized particles will continue their trajectory through a duct into the tokamak vessels to deliver the required heating power to the ITER plasma for a pulse duration of about 3600 s. Although the operating principles and the implementation of the most critical parts of the injector have been tested in different experiments, the ITER NBI requirements have never been simultaneously attained. In order to reduce the risks and to optimize the design and operating procedures of the HNB for ITER, a dedicated Neutral Beam Test Facility (NBTF) [4] has been promoted by the ITER Organization with the contribution of the European Union\u2019s Joint Undertaking for ITER and of the Italian Government, with the participation of the Japanese and Indian Domestic Agencies (JADA and INDA) and of several European laboratories, such as IPP-Garching, KIT-Karlsruhe, CCFE-Culham, CEA-Cadarache. The NBTF, nicknamed PRIMA, has been set up at Consorzio RFX in Padova, Italy [5]. The planned experiments will verify continuous HNB operation for one hour, under stringent requirements for beam divergence (< 7 mrad) and aiming (within 2 mrad). To study and optimise HNB performances, the NBTF includes two experiments: MITICA, full-scale NBI prototype with 1 MeV particle energy and SPIDER, with 100 keV particle energy and 40 A current, aiming at testing and optimizing the full-scale ion source. SPIDER will focus on source uniformity, negative ion current density and beam optics. In June 2018 the experimental operation of SPIDER has started
Role of axillary sentinel lymph node biopsy in patients with pure ductal carcinoma in situ of the breast
BACKGROUND: Sentinel lymph node (SLN) biopsy is an effective tool for axillary staging in patients with invasive breast cancer. This procedure has been recently proposed as part of the treatment for patients with ductal carcinoma in situ (DCIS), because cases of undetected invasive foci and nodal metastases occasionally occur. However, the indications for SLN biopsy in DCIS patients are controversial. The aim of the present study was therefore to assess the incidence of SLN metastases in a series of patients with a diagnosis of pure DCIS. METHODS: A retrospective evaluation was made of a series of 102 patients who underwent SLN biopsy, and had a final histologic diagnosis of pure DCIS. Patients with microinvasion were excluded from the analysis. The patients were operated on in five Institutions between 1999 and 2004. Subdermal or subareolar injection of 30–50 MBq of 99 m-Tc colloidal albumin was used for SLN identification. All sentinel nodes were evaluated with serial sectioning, haematoxylin and eosin staining, and immunohistochemical analysis for cytocheratin. RESULTS: Only one patient (0.98%) was SLN positive. The primary tumour was a small micropapillary intermediate-grade DCIS and the SLN harboured a micrometastasis. At pathologic revision of the specimen, no detectable focus of microinvasion was found. CONCLUSION: Our findings indicate that SLN metastases in pure DCIS are a very rare occurrence. SLN biopsy should not therefore be routinely performed in patients who undergo resection for DCIS. SLN mapping can be performed, as a second operation, in cases in which an invasive component is identified in the specimen. Only DCIS patients who require a mastectomy should have SLN biopsy performed at the time of breast operation, since in these cases subsequent node mapping is not feasible
- …