5,634 research outputs found

    Substrate-Integrated Folded Waveguide Slot Antenna

    Get PDF
    In recent years a number of researchers have proposed novel techniques for fabricating rectangular waveguide using microwave integrated circuit techniques. These so-called substrate integrated guides have been fabricated using multilayer LTCC, multi- and single-layer microwave laminates and photoimageable thick films. All of these structures result in dielectric filled rectangular waveguide and as such have a width reduction of 1/square root of the relative permittivity over conventional waveguide. Furthermore, by their very nature they are easily integrated with planar transmission lines and circuits, allowing hybrid waveguide/microstrip systems to be fabricated on a single substrate. Several researchers have investigated slot antennas and arrays in substrate-integrated guide. In this paper we show a slot antenna in a folded substrate-integrated waveguide. These waveguides have half the width of the other types of substrate-integrated waveguide. As such the present structure allows arrays of slot antennas to be more highly integrated

    Trypanosoma brucei gambiense in domestic livestock of Kogo and Mbini foci (Equatorial Guinea).

    No full text
    OBJECTIVE: To evaluate Trypanosoma brucei gambiense infection in peri-domestic livestock from Kogo and Mbini foci (Equatorial Guinea) in order to investigate its possible implication in the sleeping sickness transmission cycle in these hypoendemic foci. METHODS: Samples from 698 domestic animals (goats, sheep and pigs) from trypanosomiasis-endemic localities of Kogo and Mbini foci were tested for animal trypanosomes and T. b. gambiense (group I) by species-specific polymerase chain reaction. RESULTS: Trypanosoma brucei s.l., the predominant trypanosome species, was detected in 182 (52.6%) samples from Mbini and in 127 (36.1%) samples from Kogo. T. b. gambiense was only identified in seven (2%) of the Mbini samples and one co-infection (with T. vivax) was observed. CONCLUSION: The occurrence of T. b. gambiense in peri-domestic livestock in Mbini and its absence in Kogo could explain the epidemiological differences between the two foci and could have significant implications for sleeping sickness control in Equatorial Guinea

    Nanostructured Chitosan-Based Biomaterials for Sustained and Colon-Specific Resveratrol Release

    Get PDF
    In the present work, we demonstrate the preparation of chitosan-based composites as vehicles of the natural occurring multi-drug resveratrol (RES). Such systems are endowed with potential therapeutic effects on inflammatory bowel diseases (IBD), such as Crohn’s disease (CD) and ulcerative colitis, through the sustained colonic release of RES from long-lasting mucoadhesive drug depots. The loading of RES into nanoparticles (NPs) was optimized regarding two independent variables: RES/polymer ratio, and temperature. Twenty experiments were carried out and a Box–Behnken experimental design was used to evaluate the significance of these independent variables related to encapsulation efficiency (EE). The enhanced RES EE values were achieved in 24 h at 39 °C and at RES/polymer ratio of 0.75:1 w/w. Sizes and polydispersities of the optimized NPs were studied by dynamic light scattering (DLS). Chitosan (CTS) dispersions containing the RES-loaded NPs were ionically gelled with tricarballylic acid to yield CTS-NPs composites. Macro- and microscopic features (morphology and porosity studied by SEM and spreadability), thermal stability (studied by TGA), and release kinetics of the RES-loaded CTS-NPs were investigated. Release patterns in simulated colon conditions for 48 h displayed significant differences between the NPs (final cumulative drug release: 79–81%), and the CTS-NPs composites (29–34%)

    Inkjet printed and folded LTE antenna for vehicular application

    Get PDF
    A multi-band antenna suitable for Long-term Evolution (LTE) is inkjet-printed, and then folded around a cylindrical form. The plastic cylinder is also printed using additive manufacturing techniques, as a separate process. The antenna is based on a planar wideband monopole radiator concept with an additional resonator for the LTE700 frequency band. The aim is to study the potential of low-cost additive manufacturing (AM) techniques for the development of vehicular antennas. Two antennas have been fabricated, one on paper substrate, and a second on polyethylene terephthalate (PET) substrate. The one on paper is tested as a planar monopole antenna on a large ground plane. The one printed on PET is shaped onto the cylindrical form. The main aim is to investigate the use of low-cost inkjet printing techniques for the fabrication of disposable vehicular antennas that can be upgraded regularly. The antennas successfully operate at all LTE and mobile frequency bands. Finite different time domain simulations compare well with measurements

    Tuberculous arthritis of native joints – a systematic review and European Bone and Joint Infection Society workgroup report

    Get PDF
    Introduction: The aim of this systematic review was to assess the existing published data on the diagnosis and management of tuberculosis (TB) arthritis involving native joints in adults aged 18 years and older. Methods: This study was performed in accordance with the guidelines provided in the Preferred Reporting Items for Systematic reviews and Meta-Analysis extension for Scoping Reviews (PRISMA-ScR). Results: The systematic review of the literature yielded 20 data sources involving 573 patients from nine countries. There was considerable variation amongst the studies in terms of the approach to diagnosis and management. The diagnosis was mostly made by microbiological tissue culture. Medical management involved a median of 12 months of anti-tubercular treatment (interquartile range, IQR, of 8–16; range of 4–18 months). The duration of preoperative treatment ranged from 2 to 12 weeks. Surgery was performed on 87 % of patients and varied from arthroscopic debridement to complete synovectomies combined with total joint arthroplasty. The mean follow-up time of all studies was 26 months (range of 3–112 months). Recurrence rates were reported in most studies, with an overall average recurrence rate of approximately 7.4 % (35 of 475 cases). Conclusions: The current literature on TB arthritis highlights the need for the establishment of standardized guidelines for the confirmation of the diagnosis. Further research is needed to define the optimal approach to medical and surgical treatment. The role of early debridement in active TB arthritis needs to be explored further. Specifically, comparative studies are required to address questions around the use of medical treatment alone vs. in combination with surgical intervention.</p

    Temporal evolution of a seismic sequence induced by a gas injection in the Eastern coast of Spain

    Get PDF
    Induced seismicity associated with energy production is becoming an increasingly important issue worldwide for the hazard it poses to the exposed population and structures. We analyze one of the rare cases of induced seismicity associated with the underwater gas storage operations observed in the Castor platform, located in the Valencia gulf, east Spain, near a complex and important geological structure. In September 2013, some gas injection operations started at Castor, producing a series of seismic events around the reservoir area. The larger magnitude events (up to 4.2) took place some days after the end of the injection, with EMS intensities in coastal towns up to degree III. In this work, the seismic sequence is analyzed with the aim of detecting changes in statistical parameters describing the earthquake occurrence before and after the injection and identifying possible proxies to be used for monitoring the sequence evolution. Moreover, we explore the potential predictability of these statistical parameters which can be used to control the field operations in injection/storage fluid reservoirs. We firstly perform a retrospective approach and next a perspective analysis. We use different techniques for estimating the value of the expected maximum magnitude that can occur due to antropogenic activities in Castor.Published29012T. Sorgente SismicaJCR Journa

    Earthworm diversity in four land use systems in the region of Jaguapitã, Paraná State, Brazil.

    Get PDF
    Little infonnation is available on earthwonn distribution and diversity in the State of Paraná, southern Brazil, Earthwonn abundanee and species diversity was evaluated in four land use systems near [aguapítã, (Paraná); where pastures are being eonverted to soybean and sugarcane. Samples were taken during the rainy and dry seasons of 2004 and 2005 in eight sites: two old degraded pastures, an old pasture being eonverted to row eropping, two grain erop fields, two sugareane fields and a native forest fragmento Twentyfive 25 x 25 em soil bloeks were taken at eaeh síte, 20 of them to 10 em and five to 30 em depth. Earthwonns were manually sorted from the soil and preserved in fonnaldehyde. Earthwonn species found were: the exotics Pontoscolex corethrurus (Glossoscolecidae), Dichogaster affinis, D. bolaui and D. saliens (Acanthodrí- Iidae), Eukerria saltensis, E. eiseniana and Ocnerodrilus occidentalis (Ocnerodrilídae), and Amynthas sp. (Megascolecidae): the native species Glossoscolex n. sp. and Fimoscolex n. sp. (Glossoscolecidae), Belladrilus n. sp.l and an unidentifiable Oenerodrilidae n, sp.l (probably Belladrílus); and two unidentified Eukerria spp. (of unknown origin) (Oenerodrilidae). Pasture eonversion to row erops had a negative effect on earthwonn abundanee and diversity: fewer individuais and species were found in the eropping systems than the pastures. The forest was not a suitable referenee site, having low earthworm populations and diversity. Exotie species tended to predominate in the land use systems near [aguapítã, but native earthworm species still survived, even in degraded pastures and row erops, many years after deforestation

    Ag-Ti(C,N)-based coatings for biomedical applications : influence of silver content on the structural properties

    Get PDF
    Ag–TiCN coatings were deposited by dc reactive magnetron sputtering and their structural and morphological properties were evaluated. Compositional analysis showed the existence of Ag–TiCN coatings with different Ag/Ti atomic ratios (ranging from 0 to 1.49). The structural and morphological properties are well correlated with the evolution of Ag/Ti atomic ratio. For the samples with low Ag/Ti atomic ratio (below 0.20) the coatings crystallize in a B1-NaCl crystal structure typical of TiC0.3N0.7. The increase in Ag/Ti atomic ratio promoted the formation of Ag crystalline phases as well as amorphous CNx phases detected in both x-ray photoelectron spectroscopy and Raman spectroscopy analysis. Simultaneously to the formation of Ag crystalline phases and amorphous carbon-based phases, a decrease in TiC0.3N0.7 grain size was observed as well as the densification of coatings.Spanish Ministry of Science and InnovationFundação para a Ciência e Tecnologia (FCT)CRUP InstitutionMCIN
    corecore