66 research outputs found
Adaptive Wing/Aerofoil Design Optimisation Using MOEA Coupled to Uncertainty Design Method
The use of adaptive wing/aerofoil designs is being considered as promising techniques in aeronautic/aerospace since they can reduce aircraft emissions, improve aerodynamic performance of manned or unmanned aircraft. The paper investigates the robust design and optimisation for one type of adaptive techniques; Active Flow Control (AFC) bump at transonic flow conditions on a Natural Laminar Flow (NLF) aerofoil designed to increase aerodynamic efficiency (especially high lift to drag ratio). The concept of using Shock Control Bump (SCB) is to control supersonic flow on the suction/pressure side of NLF aerofoil: RAE 5243 that leads to delaying shock occurrence or weakening its strength. Such AFC technique reduces total drag at transonic speeds due to reduction of wave drag. The location of Boundary Layer Transition (BLT) can influence the position the supersonic shock occurrence. The BLT position is an uncertainty in aerodynamic design due to the many factors, such as surface contamination or surface erosion. The paper studies the SCB shape design optimisation using robust Evolutionary Algorithms (EAs) with uncertainty in BLT positions. The optimisation method is based on a canonical evolution strategy and incorporates the concepts of hierarchical topology, parallel computing and asynchronous evaluation. Two test cases are conducted; the first test assumes the BLT is at 45% of chord from the leading edge and the second test considers robust design optimisation for SCB at the variability of BLT positions and lift coefficient. Numerical result shows that the optimisation method coupled to uncertainty design techniques produces Pareto optimal SCB shapes which have low sensitivity and high aerodynamic performance while having significant total drag reduction
Effects of epitaxial strain on the growth mechanism of YBa2Cu3O7-x thin films in [YBa2Cu3O7-x / PrBa2Cu3O7-x] superlattices
We report on the growth mechanism of YBa2Cu3O7-x (YBCO). Our study is based
on the analysis of ultrathin, YBa2Cu3O7-x layers in c-axis oriented YBa2Cu3O7-x
/ PrBa2Cu3O7-x superlattices. We have found that the release of epitaxial
strain in very thin YBCO layers triggers a change in the dimensionality of the
growth mode. Ultrathin, epitaxially strained, YBCO layers with thickness below
3 unit cells grow in a block by block two dimensional mode coherent over large
lateral distances. Meanwhile, when thickness increases, and the strain relaxes,
layer growth turns into three dimensional, resulting in rougher layers and
interfaces.Comment: 10 pages + 9 figures, accepted in Phys. Rev.
Is there a vortex-glass transition in high-temperature superconductors?
We show that DC voltage versus current measurements of a YBCO micro-bridge in
a magnetic field can be collapsed onto scaling functions proposed by Fisher,
Fisher, and Huse, as is widely reported in the literature. We find, however,
that good data collapse is achieved for a wide range of critical exponents and
temperatures. These results strongly suggest that agreement with scaling alone
does not prove the existence of a phase transition. We propose a criterion to
determine if the data collapse is valid, and thus if a phase transition occurs.
To our knowledge, none of the data reported in the literature meet our
criterion.Comment: 4 pages, 4 figure
Ferromagnetic/superconducting proximity effect in La0.7Ca0.3MnO3 / YBa2Cu3O7 superlattices
We study the interplay between magnetism and superconductivity in high
quality YBa2Cu3O7 (YBCO) / La0.7Ca0.3MnO3(LCMO)superlattices. We find evidence
for the YBCO superconductivity depression in presence of the LCMO layers. We
show that due to its short coherence length superconductivity survives in the
YBCO down to much smaller thickness in presence of the magnetic layer than in
low Tc superconductors. We also find that for a fixed thickness of the
superconducting layer, superconductivity is depressed over a thickness interval
of the magnetic layer in the 100 nm range. This is a much longer length scale
than that predicted by the theory of ferromagnetic/superconducting proximity
effect.Comment: 10 pages + 5 figures, submitted to Phys. Rev.
Long-range transfer of electron-phonon coupling in oxide superlattices
The electron-phonon interaction is of central importance for the electrical
and thermal properties of solids, and its influence on superconductivity,
colossal magnetoresistance, and other many-body phenomena in
correlated-electron materials is currently the subject of intense research.
However, the non-local nature of the interactions between valence electrons and
lattice ions, often compounded by a plethora of vibrational modes, present
formidable challenges for attempts to experimentally control and theoretically
describe the physical properties of complex materials. Here we report a Raman
scattering study of the lattice dynamics in superlattices of the
high-temperature superconductor and the
colossal-magnetoresistance compound that suggests
a new approach to this problem. We find that a rotational mode of the MnO
octahedra in experiences pronounced
superconductivity-induced lineshape anomalies, which scale linearly with the
thickness of the layers over a remarkably long range of
several tens of nanometers. The transfer of the electron-phonon coupling
between superlattice layers can be understood as a consequence of long-range
Coulomb forces in conjunction with an orbital reconstruction at the interface.
The superlattice geometry thus provides new opportunities for controlled
modification of the electron-phonon interaction in complex materials.Comment: 13 pages, 4 figures. Revised version to be published in Nature
Material
Modified magnetic anisotropy at LaCoO_(3)/La_(0.7)Sr_(0.3)MnO_(3) interfaces
Controlling magnetic anisotropy is an important objective towards engineering novel magnetic device concepts in oxide electronics. In thin film manganites, magnetic anisotropy is weak and it is primarily determined by the substrate, through induced structural distortions resulting from epitaxial mismatch strain. On the other hand, in cobaltites, with a stronger spin orbit interaction, magnetic anisotropy is typically much stronger. In this paper, we show that interfacing La0.7Sr0.3MnO3 (LSMO) with an ultrathin LaCoO3 (LCO) layer drastically modifies the magnetic anisotropy of the manganite, making it independent of the substrate and closer to the magnetic isotropy characterizing its rhombohedral structure. Ferromagnetic resonance measurements evidence a tendency of manganite magnetic moments to point out-of-plane suggesting non collinear magnetic interactions at the interface. These results may be of interest for the design of oxide interfaces with tailored magnetic structures for new oxide devices
The temperature-dependent magnetization profile across an epitaxial bilayer of ferromagnetic La2/3Ca1/3MnO3 and superconducting YBa2Cu3O7-d
Epitaxial bilayers of ferromagnetic La2/3Ca1/3MnO3 (LCMO) and superconducting
YBa2Cu3O7-d (YBCO) have been grown on single-crystalline SrTiO3 (STO)
substrates by pulsed laser deposition. The Manganese magnetization profile
across the FM layer has been determined with high spatial resolution at low
temperatures by X-ray resonant magnetic reflectivity (XRMR). It is found that
not only the adjacent superconductor but also the substrate underneath
influences the magnetization of the LCMO film at the interfaces at low
temperatures. Both effects can be investigated individually by XRMR
Directionally controlled superconductivity in ferromagnet/superconductor/ferromagnet trilayers with biaxial easy axes
- …