23 research outputs found
Metabolic Syndrome and Cardiovascular Disease after Hematopoietic Cell Transplantation: Screening and Preventive Practice Recommendations from the CIBMTR and EBMT
Metabolic syndrome (MetS) is a constellation of cardiovascular risk factors that increases the risk of cardiovascular disease, diabetes mellitus, and all-cause mortality. Long-term survivors of hematopoietic cell transplantation (HCT) have a substantial risk of developing MetS and cardiovascular disease, with an estimated prevalence of MetS of 31% to 49% among HCT recipients. Although MetS has not yet been proven to impact cardiovascular risk after HCT, an understanding of the incidence and risk factors for MetS in HCT recipients can provide the foundation to evaluate screening guidelines and develop interventions that may mitigate cardiovascular-related mortality. A working group was established through the Center for International Blood and Marrow Transplant Research and the European Group for Blood and Marrow Transplantation with the goal to review literature and recommend practices appropriate to HCT recipients. Here we deliver consensus recommendations to help clinicians provide screening and preventive care for MetS and cardiovascular disease among HCT recipients. All HCT survivors should be advised of the risks of MetS and encouraged to undergo recommended screening based on their predisposition and ongoing risk factors
Functionalized halloysite nanotubes for enhanced removal of lead(II) ions from aqueous solutions
In this study, environmental friendly halloysite nanotubes and their amino derivatives were used as adsorbent materials for lead(II) ions. The adsorption ability of both nanomaterials towards Pb2+ ions has been studied in NaClaq, at I = 0.1 mol L−1, in the pH range 3–6. Moreover, the effect of ionic strength on the adsorption process was evaluated at the pH of maximum efficiency of the adsorbent materials. Kinetic and equilibrium experiments were carried out by using the Differential Pulse Anodic Stripping Voltammetry (DP-ASV) technique to check the metal ion concentration in solution after contact with the two adsorbents. Different isotherm and kinetic equations were used to fit the experimental data. The speciation of metal ion and the characterization of the adsorbents with different techniques were considered in order to establish the suitable experimental conditions for the metal ion removal. The collected data showed that the functionalization of halloysite enhances the adsorption ability of the clay mineral and it makes the nanoclay a good candidate for metal removal from aqueous solutions
Site-specific halloysite functionalization by polydopamine: A new synthetic route for potential near infrared-activated delivery system
Halloysite nanotubes (HNTs) represent a versatile core structure for the design of functional nanosystems of biomedical interest. However, the development of selective methodologies for the site-controlled functionalization of the nanotubes at specific sites is not an easy task. This study aims to accomplish a procedure for the site-selective/specific, “pin-point”, functionalization of HNTs with polydopamine (HNTs@PDA). This goal was achieved, at pH 6.5, by exploiting the basicity of ZnO nanoparticles anchored on the HNTs external surface (HNTs@ZnO) to induce a punctual polydopamine polymerization and coating. The morphology and the chemical composition of the nanomaterial was demonstrated by several techniques. Turbidimetric analysis showed that PDA coating affected the aqueous stability of HNTs@PDA compared to both HNTs@ZnO and HNTs. Notably, hyperthermia studies revealed that the nanomaterial induced a local thermic rise, up to 50 °C, under near-infrared (NIR) irradiation. Furthermore, secondary functionalization of HNTs@PDA by selective grafting of biotin onto the PDA coating followed by avidin binding was also accomplished
CLAYS IN COSMETICS AND PERSONAL-CARE PRODUCTS
Clays are used in various cosmetic formulations, such as sunscreens, toothpastes, deodorants, creams, hair cosmetics, makeups, nail polish, facial masks, and shampoos, among others, to improve the organoleptic and physicochemical characteristics, to increase the stability, or to facilitate elaboration. Together with their technological functionalities, clays are cosmetologically active ingredients with cleaning, anti-aging, anti-wrinkling, and sun-care functionalities. Talc, kaolinite, mica, and some smectites are the clay minerals used most frequently in cosmetic products, but several other phyllosilicates as well as modified and synthetic clays are also used. Sometimes, clays are useful in the design of cosmetics just because they are made of rigid, small, and anisometric particles. Kaolinite and mica are made of hard prismatic particles which are lightly abrasive over the skin, teeth, or hair. Electric charges in smectites result in ion-exchange capacities useful in the loading of active cosmetics but also adsorbing and cleaning waste substances. Intermediate net negative charges of smectites result in layer expansion in polar media and specific rheological properties that are very useful in cosmetic formulations. The absence of charged particles in talc and kaolin make them flow easily resulting in lubricant effects. Protection against radiation from the sun by clay particles and decorative effects complete the possibilities of clays in cosmetics. The nomenclature for clays used as ingredients in cosmetics follows historical use and the names of commercial products, rather than following strict compositional principles. In this sense, an effort was made here to correlate the names of the minerals that make up each of the clay-based cosmetic ingredients
Clays in cosmetics and personal-care productus
Clays are used in various cosmetic formulations, such as sunscreens, toothpastes, deodorants, creams, hair cosmetics, makeups, nail polish, facial masks, and shampoos, among others, to improve the organoleptic and physicochemical characteristics, to increase the stability, or to facilitate elaboration. Together with their technological functionalities, clays are cosmetologically active ingredients with cleaning, anti-aging, anti-wrinkling, and sun-care functionalities. Talc, kaolinite, mica, and some smectites are the clay minerals used most frequently in cosmetic products, but several other phyllosilicates as well as modified and synthetic clays are also used. Sometimes, clays are useful in the design of cosmetics just because they are made of rigid, small, and anisometric particles. Kaolinite and mica are made of hard prismatic particles which are lightly abrasive over the skin, teeth, or hair. Electric charges in smectites result in ion-exchange capacities useful in the loading of active cosmetics but also adsorbing and cleaning waste substances. Intermediate net negative charges of smectites result in layer expansion in polar media and specific rheological properties that are very useful in cosmetic formulations. The absence of charged particles in talc and kaolin make them flow easily resulting in lubricant effects. Protection against radiation from the sun by clay particles and decorative effects complete the possibilities of clays in cosmetics. The nomenclature for clays used as ingredients in cosmetics follows historical use and the names of commercial products, rather than following strict compositional principles. In this sense, an effort was made here to correlate the names of the minerals that make up each of the clay-based cosmetic ingredients.The work has been supported by funding from the Spanish group CTS-946 and project P18-RT-3786
Site-specific halloysite functionalization by polydopamine: A new synthetic route for potential near infrared-activated delivery system
Halloysite nanotubes (HNTs) represent a versatile core structure for the design of functional nanosystems of biomedical interest. However, the development of selective methodologies for the site-controlled functionalization of the nanotubes at specific sites is not an easy task. This study aims to accomplish a procedure for the site-selective/specific, “pin-point”, functionalization of HNTs with polydopamine (HNTs@PDA). This goal was achieved, at pH 6.5, by exploiting the basicity of ZnO nanoparticles anchored on the HNTs external surface (HNTs@ZnO) to induce a punctual polydopamine polymerization and coating. The morphology and the chemical composition of the nanomaterial was demonstrated by several techniques. Turbidimetric analysis showed that PDA coating affected the aqueous stability of HNTs@PDA compared to both HNTs@ZnO and HNTs. Notably, hyperthermia studies revealed that the nanomaterial induced a local thermic rise, up to 50 °C, under near-infrared (NIR) irradiation. Furthermore, secondary functionalization of HNTs@PDA by selective grafting of biotin onto the PDA coating followed by avidin binding was also accomplished
Prodrug based on halloysite delivery systems to improve the antitumor ability of methotrexate in leukemia cell lines
The prodrug approach, as well as the development of specific systems able to deliver a chemotherapeutic agent in the target site, decreasing the side effects often associated with its administration, are still a challenging. In this context, both methotrexate drug molecules (MTX) and biotin ligand moieties, whose receptors are overexpressed on the surface of several cancer cells, were loaded on halloysite nanotubes (HNTs) to develop nanomaterial based on multifunctional and “smart” delivery systems. To highlight the crucial role played by biotin, carrier systems based on HNTs and MTX were also synthetized. In detail, several approaches were envisaged: i) a supramolecular interaction between the clay and the drug; ii) a covalent grafting of the drug onto the HNTs external surface and, iii) a combination of both approaches. The nanomaterials obtained were characterized by thermogravimetric analysis, FT-IR, and UV-vis spectroscopies, DLS and ζ−potential measurements and the morphologies were imaged by HAADF/STEM investigations. Kinetic release experiments at different pH conditions were also performed. Finally, as a proof-of-concept application of our pro-drug delivery systems based on HNTs in cancer therapy, the cytotoxic effects were evaluated on acute myeloid leukemia cell lines, HL60 and its multidrug resistance variant, HL60R. The obtained results showed that both the MTX prodrug system and the biotinylated ones played a crucial role in the biological activity and, they are promising agents for the cancer treatments