Occurrence and intensity of parasites in Prussian carp, Carassius gibelio from Anzali wetland, southwest Caspian Sea

The aim of this study was to detect the occurrence of parasites in Prussian carp, Carassius gibelio as the most important alien fish in Anzali international wetland. This undesirable fish was introduced accidentally to Iran with Chinese carp fries which imported to the country during the last decades and then acceded to Anzali wetland. Today this fish has significant stocks in Anzali wetland but there have been limited studies about the parasites of this fish in Anzali wetland. During this study a total of 90 Prussian carp were collected by electrofishing and gillnets from April through July 2012. After recording biometric characteristics, common necropsy and parasitology methods were used. A total of 2715 individuals out of 11 parasite species were recovered. Parasitofauna consisted of: two protozoans, Ichthyophthirius multifiliis and Trichodina sp.; one nematode, Raphidascaris acus; one trematode, Diplostomum spathaceum; six monogeneans, Dactylogyrus formosus, Dactylogyrus dulkeiti, Dactylogyrus baueri, Dactylogyrus arquatus, Dactylogyrus inexpectatus and Gyrodactylus kobayashii; and one crustacean, copepodid stage of Lernaea cyprinacea. The monogeneans had the highest prevalence values (88.89%). The occurrence of D. inexpectatus in C. gibelio is reported for the first time in Iran

Adaptation, growth and survival of tilapia (Oreochromis niloticus) in Bafgh brackish water

An experiment was conducted to evaluate the possibility of adaptation, growth and survival of Nile tilapia (Oreochromis niloticus) with 0.3g initial weight and red tilapia (Oreochromis sp.) with 0.7g initial weight in underground brackish water. Fry of Nile tilapia and red tilapia imported from Indonesia and after passing larviculture (25g) were examined separately in fiber glass tank by two replicate. Fish were fed at a restricted feeding program according to standard table during the light period. The results showed that some growth factors such as final weight, final length, daily growth rate, specific growth rate and weight gain in Nile tilapia were slightly higher than red tilapia but other factors such as survival and feed conversion rate in red tilapia were slightly higher than Nile tilapia. There were no significantly differences at 99% level among these factors. Length-weight relationship equation was w = 0.012×TL3.189 in Nile tilapia and w = 0.014×TL3.119 in red tilapia (r2 = 0.99), b value were 3.189 and 3.119 respectively in Nile and red tilapia representing isometric growth. According to the reliable growth and high survival rate (98%), it seems that both Nile and red tilapia could be good candidates for rearing in brackish water condition

The study of adaptation, growth and survival of tilapia (Oreochromis.sp) in Bafgh brackish water

An experiment was conducted to evaluate the possibility of adaptation, growth and survival of Red and Nile tilapia (Oreochromis niloticus) in underground brackish water. Fry with 0.3 and 0.7 g initial weight imported from Indonesia and after passing larviculture (20 g) were examined separately in fiber glass tank and earthen pond by two replicate. Fish were fed three times a day by using manual food (cp=33.79) and carp food (cp=25.05) at a restricted feeding program according to standard table during the 72 days rearing stage at light period. The results showed that some growth factors such as final weight, final length, daily growth rate, specific growth rate and weight gain in Nile tilapia were slightly higher than red tilapia but other factors such as survival and feed conversion rate in red tilapia were slightly higher than Nile tilapia. There were no significantly differences at 99% level among these factors. Length-weight relationship equation was w = 0.020 × TL3.012 in Nile tilapia and w = 0.015×TL3.086 in red tilapia (r^2 = 0.98), b value was 3.012 and 3.086 respectively in Nile and red tilapia representing isometric growth. So according to the results, good growth and high survival rate, it seems that both Nile and red tilapia could be good candidates for reproducing and rearing in brackish water condition

Comparison of neutral anolyte solution and malachite green efficiency on fungal contamination control of rainbow trout (Oncorhynchus mykiss) eggs in incubation stage

One of the important problems in Rainbow trout production industry is egg fungal infection especially saprolegniasis which is the most important mortality factor in Rainbow trout hatcheries. Controlling saprolegniasis in hatcheries was done using green malachite in the past years, which is a very effective fungicide. Nowadays, due to the prohibition of using green malachite, effort is done to replace it with other materials as an effective fungicide. Some of the most important materials which have been examined are formalin, sodium chloride and hydrogen peroxide etc. The aim of this study was to evaluate the effects of neutral anolyte on the mortality percent of rainbow trout eggs and produced larvae in point of view of growth indices and survival until yolk sac absorption and larvae active feeding in incubation phase comparing with green malachite to be able to introduce a suitable alternative. This study was carried out in a complete randomly plan with 7 treatments and 3 replications (21 troughs in general), in 20*35*70 cm (length*width*depth) Californian troughs containing an incubator. Treatments included anolyte solutions constant bathing with 0.5 and 0.25 ppm concentrations and periodic anolyte treatments with 2 ppm concentrations (every 2 days), positive control infected with fungus without any disinfectant and negative control without any infection or disinfectant. 300 grams of newly propagated green eggs of rainbow trout which were provided from one of the fish hatcheries in Haraz Road and acclimated with the trough’s water temperature, were distributed in one layer at the bottom of the trough basket. All treatments, except negative control, were infected with saprolegnia, taken from infected eggs of rainbow trout which were previously provided from one of the fish hatcheries of 2000 Road in Tonekabon. The treatments took one month to complete. The studied variables included hatching percent, percent of eyed eggs, abnormality percent and percent of unfertilized eggs, from which percent of eyed eggs was calculated and recorded in the middle and the rest of the variables at the end of the test. In this study Paired-sample T-student test, Levene’s test, one-way ANOVA and Bonferroni’s test was used. For examining egg abnormality, hatching, fungus infection and eyed eggs, first the percent of the variables were specified and then for comparing the rate of abnormality in one of the anolyte treatments (which had the least abnormality) and green malachite, Mann-Whitney test was carried out. This comparison was done to analyze the rate of hatching, fungus infections, eyed eggs, resulting from the materials used in different treatments, using one-way ANOVA Bonferroni’s tests. Results showed that in lower anolyte concentrations (0.5 and 0.25 ppm), the number of fungal colonies of hatchery water and the percent of egg fungus infection were significantly higher than higher concentrations of anolyte (100 ppm and 30 ppm) and green malachite. In other words with concentration increase, the fungicidal effect has also increased. In evaluating the percent of eyed eggs, statistical results showed that eyed eggs percent in 0.25 ppm treatment and green malachite treatment were significantly higher than the other three anolyte treatments. This result can explain egg hatching in 0.25 ppm concentrations and not seeing hatching in the (other) remaining three doses. Between the treatments of 0.25 ppm and green malachite, the group of 0.25 ppm anolyte can be a better disinfectant for rainbow trout eggs compared to green malachite, for fish farmers, due to the high percent of eyed eggs and the low total count of fungus. The results of this study showed that the amount of abnormality in 0.25 ppm treatment has been higher compared to the green malachite group. Because this study was the first research on using anolyte as a fungicide in rainbow trout hatcheries, therefore for more specific study of the concentrations, the timing of usage and the factors affecting these two, more vast and general research is needed

The fifth developing plan of Iranian Fisheries Research Institute

Accurate scientific and practical plan for achieving the goals of the Islamic Republic of Iran within the framework of Vision development 1404, is the infrastructure achieving sustainable development of the country. Order to achieve the above mentioned objectives and in order to the comprehensive development plans in the country, Iranian fisheries research organization adjust the fifth developing plan for support of executive related departments in country with mobilization a large number researchers consists of several working groups of ifro affiliated research centers. The fifth developing plan consist of three chapters for report of the forth developing plan and intrudction of research, construction plans and financial support (budjet) for period of 2011-2014 A.C

DEM GPU studies of industrial scale particle simulations for granular flow civil engineering applications

The use of the Discrete Element Method (DEM) for industrial civil engineering industrial applications is currently limited due to the computational demands when large numbers of particles are considered. The graphics processing unit (GPU) with its highly parallelized hardware architecture shows potential to enable solution of civil engineering problems using discrete granular approaches. We demonstrate in this study the pratical utility of a validated GPU-enabled DEM modeling environment to simulate industrial scale granular problems. As illustration, the flow discharge of storage silos using 8 and 17 million particles is considered. DEM simulations have been performed to investigate the influence of particle size (equivalent size for the 20/40-mesh gravel) and induced shear stress for two hopper shapes. The preliminary results indicate that the shape of the hopper significantly influences the discharge rates for the same material. Specifically, this work shows that GPU-enabled DEM modeling environments can model industrial scale problems on a single portable computer within a day for 30 seconds of process time

Towards reproducible experimental studies for non-convex polyhedral shaped particles

The packing density and flat bottomed hopper discharge of non-convex polyhedral particles are investigated in a systematic experimental study. The motivation for this study is two-fold. Firstly, to establish an approach to deliver quality experimental particle packing data for non-convex polyhedral particles that can be used for characterization and validation purposes of discrete element codes. Secondly, to make the reproducibility of experimental setups as convenient and readily available as possible using affordable and accessible technology. The primary technology for this study is fused deposition modeling used to 3D print polylactic acid (PLA) particles using readily available 3D printer technology. A total of 8000 biodegradable particles were printed, 1000 white particles and 1000 black particles for each of the four particle types considered in this study. Reproducibility is one benefit of using fused deposition modeling to print particles, but an extremely important additional benefit is that specific particle properties can be explicitly controlled. As an example in this study the volume fraction of each particle can be controlled i.e. the effective particle density can be adjusted. In this study the particle volumes reduces drastically as the non-convexity is increased, however all printed white particles in this study have the same mass within 2% of each other