Continuous Hydrothermal Synthesis of Metal Germanates (M₂GeO₄; M=Co, Mn, Zn) for High-Capacity Negative Electrodes in Li-Ion Batteries

Nanosized metal germanates (M2GeO4; M = Co, Mn, Zn) are synthesized using a continuous hydrothermal flow synthesis process for the first time. The electrochemical properties of all samples as active materials for negative electrodes in Li‐ion half cells are explored. The galvanostatic and potentiodynamic testing is conducted in the potential range of 3.00–0.05 V versus Li/Li+. The results suggest that both alloying and conversion reactions associated with Ge contribute to the stored charge capacity; Zn2GeO4 shows a high specific capacity of 600 mAh g−1 (ten cycles at 0.1 A g−1) due to alloying and conversion reactions for both Ge and Zn. Mn2GeO4 is studied for the first time as a potential negative electrode material in a Li‐ion half cell; an excellent specific charge capacity of 510 mAh g−1 (10 cycles per 0.1 A g−1) is obtained with a significant contribution to charge arising from the conversion reaction of Mn to MnO upon delithiation. In contrast, Co2GeO4 only shows a specific capacity of 240 mAh g−1, after ten cycles at the same current rate, which suggests that cobalt has little or no benefit for enhancing stored charge in germanate

Mixed molybdenum and vanadium oxide nanoparticles with excellent high-power performance as Li-ion battery negative electrodes

Several nano-sized mixed molybdenum/vanadium oxide monoclinic solid solutions were synthesised using a continuous hydrothermal flow process and studied with a wide range of physical characterization techniques including X-ray photoelectron spectroscopy, X-ray diffraction, transmission electron microscopy and X-ray absorption spectroscopy. The nanomaterials were tested as anodes for Li-ion batteries in the potential range 0.05–3.00 V vs. Li/Li+. Samples with nominal formulas of Mo0.5V0.5O2 and Mo0.33V0.67O2 showed excellent performance, especially at high current rates, due to their highly pseudocapacitive charge storage mechanism. At a specific current of 10 A g−1, Mo0.5V0.5O2 and Mo0.33V0.67O2 showed specific capacities of ca. 200 and 170 mAh g−1, respectively. Mo0.5V0.5O2 also showed good cyclability, with a specific capacity of 480 mAh g−1 after 150 cycles at a specific current of 0.5 A g−1. For cyclic voltammetries conducted at high scan rates, pseudocapacitive charge storage contributed more than 90% to the total charge storage for both samples. The scalability of the synthesis technique and excellent electrochemical performance at high power, make these materials promising as negative electrode active materials for Li-ion batteries

Two cases of variceal haemorrhage during living-donor liver transplantation

Some patients with cirrhosis experience rupture of venous varices before operation, and liver transplantation is a therapy of last resort for these patients. However, we have experienced two cases of intraoperative rupture in whom no abnormalities of the venous varices were seen on endoscopy before operation. One patient with ruptured gastrointestinal varices was treated by direct surgical ligation and the other with ruptured oesophageal gastric varices, spontaneously recovered with a Sengstaken–Blakemore tube. These cases suggest that acute variceal haemorrhage should always be considered as a possibility during living-donor liver transplantation in patients with a history of upper gastrointestinal bleeding. Careful observation of the nasogastic tube is important during clamping of the hepatic portal vein

Seasonal variation of carbon monoxide in northern Japan: Fourier transform IR measurements and source-labeled model calculations

Tropospheric carbon monoxide (CO) was measured throughout 2001 using groundbased Fourier transform IR (FTIR) spectrometers at Moshiri 44.4N and Rikubetsu 43.5N) observatories in northern Japan, which are separated by 150 km. Seasonal and day-to-day variations of CO are studied using these data, and contributions from various CO sources are evaluated using three-dimensional global chemistry transport model (GEOS-CHEM) calculations. Seasonal maximum and minimum FTIR-derived tropospheric CO amounts occurred in April and September, respectively. The ratio of partial column amounts between the 0–4 and 0–12 km altitude ranges is found to be slightly greater in early spring. The GEOS-CHEM model calculations generally reproduce these observed features. Source-labeled CO model calculations suggest that the observed seasonal variation is caused by seasonal contributions from various sources, in addition to a seasonal change in chemical CO loss by OH. Changes in meteorological fields largely control the relative importance of various source contributions. The contributions from fossil fuel (FF) combustion in Asia and photochemical CO production have the greatest yearly averaged contribution at 1 km among the CO sources (31% each). The Asian FF contribution increases from winter to summer, because weak southwesterly wind in summer brings more Asian pollutants to the observation sites. The seasonal variation from photochemical CO production is small (±17% at 1 km), likely because of concurrent increases (decreases) of photochemical production and loss rates in summer (winter), with the largest contribution between August and December. The contribution from intercontinental transport of European FF combustion CO is found to be comparable to that of Asian FF sources in winter. Northwesterly wind around the Siberian high in this season brings pollutants from Europe directly to Japan, in addition to southward transport of accumulated pollution from higher latitudes. The influences are generally greater at lower altitudes, resulting in a vertical gradient in the CO profile during winter. The model underestimates total CO by 12–14% between March and June. Satellite-derived fire-count data and the relationship between FTIR-derived HCN and CO amounts are generally consistent with biomass burning influences, which could have been underestimated by the model calculations

HIV-1 Envelope Subregion Length Variation during Disease Progression

The V3 loop of the HIV-1 Env protein is the primary determinant of viral coreceptor usage, whereas the V1V2 loop region is thought to influence coreceptor binding and participate in shielding of neutralization-sensitive regions of the Env glycoprotein gp120 from antibody responses. The functional properties and antigenicity of V1V2 are influenced by changes in amino acid sequence, sequence length and patterns of N-linked glycosylation. However, how these polymorphisms relate to HIV pathogenesis is not fully understood. We examined 5185 HIV-1 gp120 nucleotide sequence fragments and clinical data from 154 individuals (152 were infected with HIV-1 Subtype B). Sequences were aligned, translated, manually edited and separated into V1V2, C2, V3, C3, V4, C4 and V5 subregions. V1-V5 and subregion lengths were calculated, and potential N-linked glycosylation sites (PNLGS) counted. Loop lengths and PNLGS were examined as a function of time since infection, CD4 count, viral load, and calendar year in cross-sectional and longitudinal analyses. V1V2 length and PNLGS increased significantly through chronic infection before declining in late-stage infection. In cross-sectional analyses, V1V2 length also increased by calendar year between 1984 and 2004 in subjects with early and mid-stage illness. Our observations suggest that there is little selection for loop length at the time of transmission; following infection, HIV-1 adapts to host immune responses through increased V1V2 length and/or addition of carbohydrate moieties at N-linked glycosylation sites. V1V2 shortening during early and late-stage infection may reflect ineffective host immunity. Transmission from donors with chronic illness may have caused the modest increase in V1V2 length observed during the course of the pandemic

K70Q Adds High-Level Tenofovir Resistance to “Q151M Complex” HIV Reverse Transcriptase through the Enhanced Discrimination Mechanism

HIV-1 carrying the “Q151M complex” reverse transcriptase (RT) mutations (A62V/V75I/F77L/F116Y/Q151M, or Q151Mc) is resistant to many FDA-approved nucleoside RT inhibitors (NRTIs), but has been considered susceptible to tenofovir disoproxil fumarate (TFV-DF or TDF). We have isolated from a TFV-DF-treated HIV patient a Q151Mc-containing clinical isolate with high phenotypic resistance to TFV-DF. Analysis of the genotypic and phenotypic testing over the course of this patient's therapy lead us to hypothesize that TFV-DF resistance emerged upon appearance of the previously unreported K70Q mutation in the Q151Mc background. Virological analysis showed that HIV with only K70Q was not significantly resistant to TFV-DF. However, addition of K70Q to the Q151Mc background significantly enhanced resistance to several approved NRTIs, and also resulted in high-level (10-fold) resistance to TFV-DF. Biochemical experiments established that the increased resistance to tenofovir is not the result of enhanced excision, as K70Q/Q151Mc RT exhibited diminished, rather than enhanced ATP-based primer unblocking activity. Pre-steady state kinetic analysis of the recombinant enzymes demonstrated that addition of the K70Q mutation selectively decreases the binding of tenofovir-diphosphate (TFV-DP), resulting in reduced incorporation of TFV into the nascent DNA chain. Molecular dynamics simulations suggest that changes in the hydrogen bonding pattern in the polymerase active site of K70Q/Q151Mc RT may contribute to the observed changes in binding and incorporation of TFV-DP. The novel pattern of TFV-resistance may help adjust therapeutic strategies for NRTI-experienced patients with multi-drug resistant (MDR) mutations