869 research outputs found

    Dynamical frictional phenomena in an incommensurate two-chain model

    Full text link
    Dynamical frictional phenomena are studied theoretically in a two-chain model with incommensurate structure. A perturbation theory with respect to the interchain interaction reveals the contributions from phonons excited in each chain to the kinetic frictional force. The validity of the theory is verified in the case of weak interaction by comparing with numerical simulation. The velocity and the interchain interaction dependences of the lattice structure are also investigated. It is shown that peculiar breaking of analyticity states appear, which is characteristic to the two-chain model. The range of the parameters in which the two-chain model is reduced to the Frenkel-Kontorova model is also discussed.Comment: RevTex, 9 pages, 7 PostScript figures, to appear in Phys. Rev.

    Static and dynamic properties of frictional phenomena in a one-dimensional system with randomness

    Full text link
    Static and dynamic frictional phenomena at the interface with random impurities are investigated in a two-chain model with incommensurate structure. Static frictional force is caused by the impurity pinning and/or by the pinning due to the regular potential, which is responsible for the breaking of analyticity transition for impurity-free cases. It is confirmed that the static frictional force is always finite in the presence of impurities, in contrast to the impurity-free system. The nature of impurity pinning is discussed in connection with that in density waves. The kinetic frictional force of a steady sliding state is also investigated numerically. The relationship between the sliding velocity dependence of the kinetic frictional force and the strength of impurity potential is discussed.Comment: RevTex, 14 pages, 6 PostScript figures, to appear in Phys. Rev.

    Resistive relaxation in field-induced insulator-metal transition of a (La0.4_{0.4}Pr0.6_{0.6})1.2_{1.2}Sr1.8_{1.8}Mn2_{2}O7_{7} bilayer manganite single crystal

    Get PDF
    We have investigated the resistive relaxation of a (La0.4_{0.4}Pr0.6_{0.6})1.2_{1.2}Sr1.8_{1.8}Mn2_{2}O7_{7} single crystal, in order to examine the slow dynamics of the field-induced insulator to metal transition of bilayered manganites. The temporal profiles observed in remanent resistance follow a stretched exponential function accompanied by a slow relaxation similar to that obtained in magnetization and magnetostriction data. We demonstrate that the remanent relaxation in magnetotransport has a close relationship with magnetic relaxation that can be understood in the framework of an effective medium approximation by assuming that the first order parameter is proportional to the second order one.Comment: 6 pages,5 figure

    Stretched exponential behavior in remanent lattice striction of a (La,Pr)1.2_{1.2}Sr1.8_{1.8}Mn2_{2}O7_{7} bilayer manganite single crystal

    Get PDF
    We have investigated the time dependence of remanent magnetostriction in a (La,Pr)1.2_{1.2}Sr1.8_{1.8}Mn2_{2}O7_{7} single crystal, in order to examine the slow dynamics of lattice distortion in bilayered manganites. A competition between double exchange and Jahn-Teller type orbital-lattice interactions results in the observed lattice profile following a stretched exponential function. This finding suggests that spatial growth of the local lattice distortions coupled with eg_{g}-electron orbital strongly correlates with the appearance of the field-induced CMR effect.Comment: 3 figure

    Theoretical Study of Friction: A Case of One-Dimensional Clean Surfaces

    Full text link
    A new method has been proposed to evaluate the frictional force in the stationary state. This method is applied to the 1-dimensional model of clean surfaces. The kinetic frictional force is seen to depend on velocity in general, but the dependence becomes weaker as the maximum static frictional force increases and in the limiting case the kinetic friction gets only weakly dependent on velocity as described by one of the laws of friction. It is also shown that there is a phase transition between state with vanishing maximum static frictional force and that with finite one. The role of randomness at the interface and the relation to the impurity pinning of the sliding Charge-Density-Wave are discussed. to appear in Phys.Rev.B. abstract only. Full text is available upon request. E-mail: [email protected]: 2 pages, Plain TEX, OUCMT-94-

    Effect of suppression of local distortion on magnetic, electrical and thermal transport properties of Cr substituted bi-layer manganite LaSr2_{2}Mn2_{2}O7_{7}

    Get PDF
    We have investigated magnetic, electrical and thermal transport properties (Seebeck effect and thermal conductivity) of LaSr2_{2}Mn2−y_{2-y}Cry_{y}O7_{7} polycrystalline samples (yy=0.1, 0.2, 0.4 and 0.6). The Cr3+^{3+} substitution for Mn3+^{3+} sites causes a removal of dx2−y2d_{x^2-y^2} orbital of ege_g-electron resulting in a volume shrinkage of lattice. Magnetic measurements reveal the appearance of a glassy behavior for Cr-doped samples, accompanied by both a collapse of the A-type antiferromagnetic structure and the growth of ferromagnetic clusters. Cr-doping effect on electrical transport strongly enhances an insulating behavior over a wide range of temperature, while it suppresses a local minimum of thermoelectric power at lower temperatures. The phonon thermal conduction gradually rises with increasing Cr content, which is contradictory to a typical impurity effect on thermal conductivity. We attribute this to a suppression of local lattice distortion through the introduction of Jahn-Teller inactive ions of Cr3+^{3+}.Comment: 8 pages, 9figure

    Void-induced cross slip of screw dislocations in fcc copper

    Full text link
    Pinning interaction between a screw dislocation and a void in fcc copper is investigated by means of molecular dynamics simulation. A screw dislocation bows out to undergo depinning on the original glide plane at low temperatures, where the behavior of the depinning stress is consistent with that obtained by a continuum model. If the temperature is higher than 300 K, the motion of a screw dislocation is no longer restricted to a single glide plane due to cross slip on the void surface. Several depinning mechanisms that involve multiple glide planes are found. In particular, a depinning mechanism that produces an intrinsic prismatic loop is found. We show that these complex depinning mechanisms significantly increase the depinning stress

    Microvascular Architecture of the Filiform Papillae in Primates and Insectivores

    Get PDF
    The microvascular architecture of filiform papillae was investigated under a scanning electron microscope in man, Japanese monkeys, common squirrel monkeys, common marmosets, common tree shrews, large Japanese moles and dwarf shrews utilizing microvascular corrosion casts. Filiform papillae were circularly arranged in primates, and each of them was supplied by a hairpin capillary loop. These papillae sometimes were aggregated. The filiform papillae of Japanese monkeys exhibited markedly locational differences on the lingual dorsum and were supplied by circularly arranged capillary loops or by an intrapapillary capillary network. Small filiform papillae were located on an epithelial eminence in the lingual radix, each of them supplied by a low and simple hairpin capillary loop. The aggregated filiform papillae of common squirrel monkeys were less frequent without any locational differences. Low filiform papillae of common marmosets and tree shrews were simpler in form, being arranged in a circle and supplied by a simple hairpin capillary loop. The filiform papillae of insectivores were not arranged in a circle. The filiform papillae of dwarf shrews were supplied by an incomplete capillary ring without a loop. With respect to species differences, the circularly arranged capillary loops in man were most complicated and highly developed. Microvascular architecture of the filiform papillae of insectivores was much simpler, different from those observed in primates

    Colossal electroresistance and colossal magnetoresistive step in paramagnetic insulating phase of single crystalline bilayered manganite(La0.4_{0.4}Pr0.6_{0.6})1.2_{1.2}Sr1.8_{1.8}Mn2_{2}O7_{7}

    Get PDF
    We report a significant decrease in the low-temperature resistance induced by the application of an electric current on the abab-plane in the paramagnetic insulating (PMI) state of (La0.4_{0.4}Pr0.6_{0.6})1.2_{1.2}Sr1.8_{1.8}Mn2_{2}O7_{7}. A colossal electroresistance effect attaining -95% is observed at lower temperatures. A colossal magnetoresistive step appears near 5T at low temperatures below 10K, accompanied by an ultrasharp width of the insulator-metal transition. Injection of higher currents to the crystal causes a disappearance of the steplike transition. These findings have a close relationship with the presence of the short-range charge-ordered clusters pinned within the PMI matrix of the crystal studied.Comment: 4 pages 3 figure

    Anomalous pressure effect on the remanent lattice striction of a (La,Pr)1.2_{1.2}Sr1.8_{1.8}Mn2_{2}O7_{7} bilayered manganite single crystal

    Get PDF
    We have studied the pressure effect on magnetostriction, both in the abab-plane and along the c-axis, of a (La,Pr)1.2_{1.2}Sr1.8_{1.8}Mn2_{2}O7_{7} bilayered manganite single crystal over the temperature region where the field-induced ferromagnetic metal (FMM) transition takes place. For comparison, we have also examined the pressure dependence of magnetization curves at the corresponding temperatures. The applied pressure reduces the critical field of the FMM transition and it enhances the remanent magnetostriction. An anomalous pressure effect on the remanent lattice relaxation is observed and is similar to the pressure effect on the remanent magnetization along the c-axis. These findings are understood from the view point that the double-exchange interaction driven FMM state is strengthened by application of pressure.Comment: 7 pages,7 figure
    • …
    corecore