6,007 research outputs found
Some Physical Properties of Aqueous Salt Solutions
The refractive indices of solutions of the alkali halides and nitrates were determined at 25 ° and from these the specific refractivities of both the solution and solute were calculated by means of the Lorenz-Lorentz formula. From density data the partial molal volumes were also calculated. The dielectric constants of the solutions were calculated by means of the Huckel relation involving the refractive index and were found to decrease with increase in concentration, the values for all salts approaching the same small value at saturation. The activities were calculated according to the equation given by Huckel for concentrated solutions of strong electrolytes and were found to agree qualitatively with experimental values
Competing magnetic fluctuations in Sr3Ru2O7 probed by Ti doping
We report the effect of nonmagnetic Ti4+ impurities on the electronic and
magnetic properties of Sr3Ru2O7. Small amounts of Ti suppress the
characteristic peak in magnetic susceptibility near 16 K and result in a sharp
upturn in specific heat. The metamagnetic quantum phase transition and related
anomalous features are quickly smeared out by small amounts of Ti. These
results provide strong evidence for the existence of competing magnetic
fluctuations in the ground state of Sr3Ru2O7. Ti doping suppresses the low
temperature antiferromagnetic interactions that arise from Fermi surface
nesting, leaving the system in a state dominated by ferromagnetic fluctuations.Comment: 5 pages, 4 figures, 1 tabl
Kaluza-Klein Dark Matter, Electrons and Gamma Ray Telescopes
Kaluza-Klein dark matter particles can annihilate efficiently into
electron-positron pairs, providing a discrete feature (a sharp edge) in the
cosmic spectrum at an energy equal to the particle's mass (typically
several hundred GeV to one TeV). Although this feature is probably beyond the
reach of satellite or balloon-based cosmic ray experiments (those that
distinguish the charge and mass of the primary particle), gamma ray telescopes
may provide an alternative detection method. Designed to observe very
high-energy gamma-rays, ACTs also observe the diffuse flux of electron-induced
electromagnetic showers. The GLAST satellite, designed for gamma ray astronomy,
will also observe any high energy showers (several hundred GeV and above) in
its calorimeter. We show that high-significance detections of an
electron-positron feature from Kaluza-Klein dark matter annihilations are
possible with GLAST, and also with ACTs such as HESS, VERITAS or MAGIC.Comment: 10 pages, 2 figure
Two photon annihilation of Kaluza-Klein dark matter
We investigate the fermionic one-loop cross section for the two photon
annihilation of Kaluza-Klein (KK) dark matter particles in a model of universal
extra dimensions (UED). This process gives a nearly mono-energetic gamma-ray
line with energy equal to the KK dark matter particle mass. We find that the
cross section is large enough that if a continuum signature is detected, the
energy distribution of gamma-rays should end at the particle mass with a peak
that is visible for an energy resolution of the detector at the percent level.
This would give an unmistakable signature of a dark matter origin of the
gamma-rays, and a unique determination of the dark matter particle mass, which
in the case studied should be around 800 GeV. Unlike the situation for
supersymmetric models where the two-gamma peak may or may not be visible
depending on parameters, this feature seems to be quite robust in UED models,
and should be similar in other models where annihilation into fermions is not
helicity suppressed. The observability of the signal still depends on largely
unknown astrophysical parameters related to the structure of the dark matter
halo. If the dark matter near the galactic center is adiabatically contracted
by the central star cluster, or if the dark matter halo has substructure
surviving tidal effects, prospects for detection look promising.Comment: 17 pages, 3 figures; slightly revised versio
Affinities of the family Sollasellidae (Porifera, Demospongiae). I. Morphological evidence
Comparison of Sollasella digitata Lendenfeld, 1888, up until the present assigned to its own family Sollasellidae Lendenfeld, 1887 in the order Hadromerida, and Raspailopsis cervicornis Burton, 1959, assigned to Raspailiidae Nardo, 1833 in the order Poecilosclerida, leads to the conclusion that both should be considered congeneric and are best assigned to a single genus Sollasella. This conclusion is based on examination of habit and skeletal characters of the type material of S. digitata and both type and freshly collected material of S. cervicornis. The conclusion is strengthened by the discovery of a new species, Sollasella moretonensis n.sp. collected in North Australia (primarily in the northeastern coast, but also an isolated record from the northwestern Australian coast), which possesses in addition to the characteristic surface pattern and skeletal structure, genuine echinating acanthostyles. The redefined genus Sollasella shares axial / extra-axial arrangement of the skeleton, special surface brushes of oxeas surrounding a single protruding style, and vestigial occurrence of acanthostyles with many Raspailia s.l. Nevertheless, it is retained as a separate genus, on account of its peculiar polygonal arrangement of surface pores. The distribution of the genus is disjunctive including both (southeast, northeast and northwest) Australian and Western Indian Ocean localities, but so far no intermediate records. Based on this morphological evidence, it is proposed – pending publication of corroborating molecular evidence to be presented in a follow-up study – to reassign Sollasella and the family Sollasellidae to the poecilosclerid family Raspailiidae
Recommended from our members
Heme oxygenase-1 protects against Alzheimer’s amyloid-β1-42 induced toxicity via carbon monoxide production
Heme oxygenase-1 (HO-1), an inducible enzyme up-regulated in Alzheimer‟s disease (AD), catabolises heme to biliverdin, Fe2+ and carbon monoxide (CO). CO can protect neurones from oxidative stress-induced apoptosis by inhibiting Kv2.1 channels, which mediate cellular K+ efflux as an early step in the apoptotic cascade. Since apoptosis contributes to the neuronal loss associated with amyloid β peptide (Aβ) toxicity in AD, we investigated the protective effects of HO-1 and CO against Aβ1-42 toxicity in SH-SY5Y cells, employing cells
stably transfected with empty vector or expressing the cellular prion protein, PrPc, and rat primary hippocampal neurons. Aβ1-42 (containing protofibrils) caused a concentrationdependent decrease in cell viability, attributable at least in part to induction of apoptosis, with the PrPc expressing cells showing greater susceptibility to Aβ1-42 toxicity. Pharmacological
induction or genetic over-expression of HO-1 significantly ameliorated the effects of Aβ1-42. The CO-donor CORM-2 protected cells against Aβ1-42 toxicity in a concentration-dependent manner. Electrophysiological studies revealed no differences in the outward current pre- and post-Aβ1-42 treatment suggesting that K+ channel activity is unaffected in these cells. Instead, Aβ toxicity was reduced by the L-type Ca2+ channel blocker nifedipine, and by the CaMKKII inhibitor, STO-609. Aβ also activated the downstream kinase, AMP-dependent protein kinase (AMPK). CO prevented this activation of AMPK. Our findings indicate that HO-1 protects against Aβ toxicity via production of CO. Protection does not arise from inhibition of apoptosis-associated K+ efflux, but rather by inhibition of AMPK activation, which has been
recently implicated in the toxic effects of Aβ. These data provide a novel, beneficial effect of CO which adds to its growing potential as a therapeutic agent
An integrated method for net-shape manufacturing components combining 3D additive manufacturing and compressive forming processes
Additive manufactured (AM) or 3D printed metallic components suffer poor and inconsistent mechanical properties due to the presence of a large number of micro-voids, residual stress and microstructure inhomogeneity. To overcome these problems, a new forming process has been proposed, which effectively combines AM and compressive forming. The aim of this study is to prove the feasibility of this newly proposed method by providing preliminary results. Thus, we compared the tensile performance of hot-forged additive manufactured stainless steel 316L samples to none-hot-forged additive manufactured ones. Significant improvement in mechanical properties has been found in the tensile tests as well hardness test. In addition, our EBSD characterized grain orientation maps at each stage of the process revealed the corresponding microstructure revolution which provides insights into underlying mechanistic
Spinless photon dark matter from two universal extra dimensions
We explore the properties of dark matter in theories with two universal extra
dimensions, where the lightest Kaluza-Klein state is a spin-0 neutral particle,
representing a six-dimensional photon polarized along the extra dimensions.
Annihilation of this 'spinless photon' proceeds predominantly through Higgs
boson exchange, and is largely independent of other Kaluza-Klein particles. The
measured relic abundance sets an upper limit on the spinless photon mass of 500
GeV, which decreases to almost 200 GeV if the Higgs boson is light. The
phenomenology of this dark matter candidate is strikingly different from
Kaluza-Klein dark matter in theories with one universal extra dimension.
Elastic scattering of the spinless photon with quarks is helicity suppressed,
making its direct detection challenging, although possible at upcoming
experiments. The prospects for indirect detection with gamma rays and
antimatter are similar to those of neutralinos. The rates predicted at neutrino
telescopes are below the sensitivity of next-generation experiments.Comment: 22 pages. Figure 7 corrected, leading to improved prospects for
direct detection. Some clarifying remarks include
Working with simple machines
A set of examples is provided that illustrate the use of work as applied to
simple machines. The ramp, pulley, lever and hydraulic press are common
experiences in the life of a student and their theoretical analysis therefore
makes the abstract concept of work more real. The mechanical advantage of each
of these systems is also discussed so that students can evaluate their
usefulness as machines.Comment: 9 pages, 4 figure
- …