Leadership in International Schools

This blog reflects ongoing research on learning-centred leadership in international schools. The study focuses on the practice of principals, leadership development, and the social impact of leadership. The blog aims to create dialogue and encourage the feedback of academics, professionals, and readers. This will ultimately enrich my research and help to constantly (re)shape my social construction of knowledge on leadership and schools

Manifestations of Neo-Liberalised and Politically Incapacitated Societies: Educational Response to the Pandemic in the Arab Region

This paper offers a commentary on the response to the pandemic in the Arab region and an analysis of pre-existing gaps and deficiencies in the educational systems. Due to the shortage in empirical studies in this area, this commentary was written based on current observations and an analysis of relevant literature and scholarly work, mainly Freire (1970) and Giroux (2011). This critical paper paints a gloomy picture but also offers hope for education in the Arab world. It concludes by discussing how the engagement and empowerment of teachers, students and parents can contribute to a possible reinvention and redesign of the educational system

Clinical Competence of Undergraduate Dental Students in Pediatric Dentistry at a Saudi Dental School

Objective: To assess the clinical competence of undergraduate dental students in pediatric dentistry at Qassim University dental school. Material and Methods: A retrospective audit of students' clinical competency sheets of fourth and fifth-year students (n= 102) over two years was performed. Mean competency scores for each clinical procedure as well as overall scores of the students were compared according to their academic level and gender. Also, the percentage of competent students was compared according to the academic level. Chi-square and t-tests were used to analyze the data (p<0.05). Results: Compared to fifth-year students, fourth-year students were significantly more competent in pediatric dentistry (100% scored >50% overall compared to 86.9 % of fifth-year students). They had significantly higher mean overall scores (84.63 ± 9.15 compared to 67.68 ± 13.83) as well as individual scores in performing an examination, diagnosis, and treatment planning of a child patient, restorations, and stainless steel crowns than fifth-year students. In addition, females had significantly higher mean scores in the aforementioned procedures and in placing esthetic crowns (p<0.05). Conclusion: Fourth-year dental students at Qassim University were more competent clinically than fifth-year students in pediatric dentistry. Also, in most of the shared procedures, females were more competent than males. A deficiency in the competence of fifth-year students was noted in pulp therapy, stainless steel and esthetic crowns procedures, and these are currently being addressed

Antibacterial Efficacy of Silver Diamine Fluoride Compared to Casein Phosphopeptide-Amorphous Calcium Phosphate Against Streptococcus mutans in a Biofilm Caries Model

Objective: To compare the antibacterial efficacy of silver diamine fluoride (SDF) with a product containing casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) against Streptococcus mutans using a biofilm caries model. Material and Methods: Twenty-seven saliva-coated dentine blocks obtained from extracted human teeth were inoculated with Streptococcus mutans monospecies biofilm in this in vitro study. The biofilms were then exposed to 10% sucrose in brain heart infusion broth eight times daily for seven days. After the biofilm growth period, the dentine blocks (n=9 per group) were treated with one of the following substances: 1) sterile saline (control), 2) 38% SDF, and 3) a product containing CPP-ACP. Then, the samples were incubated at 37ºC for 48 hours, and the numbers of viable microorganisms in the biofilms were counted and compared. ANOVA and Tukey\u27s HSD tests were used to analyze the data (p<0.05). Results: The number of viable bacteria, as determined by the number of colony-forming units (CFU mL-1) of Streptococcus mutans, was significantly reduced following treatment with SDF and the CPP-ACP product (p<0.05). However, SDF showed superior antibacterial activity compared to the CPP-ACP product (mean CFU mL-1=zero compared to 96 x106) (p<0.05). Conclusion: SDF has higher antibacterial activity against cariogenic Streptococcus mutans biofilm than the CPP-ACP product. The CPP-ACP product showed antibacterial activity, but it was limited

Durability of cantilever inlay-retained fixed dental prosthesis fabricated from multilayered zirconia ceramics with different designs.

PURPOSE The purpose of this in-vitro study was to investigate the effect of framework design on fracture resistance and failure modes of cantilever inlay-retained fixed partial dentures (IRFDPs) fabricated from two multilayered monolithic zirconia materials. MATERIALS AND METHODS Seventy-two natural premolar teeth were prepared as abutments for cantilever IRFDPs using three designs: mesial-occlusal (MO) inlay with short buccal and palatal wings (D1), MO inlay with long palatal wing (D2), MO inlay with long palatal wing and occlusal extension (D3). Full-contoured IRFDPs were fabricated from two monolithic zirconia materials; IPS e.max ZirCAD Prime and Zolid Gen-X. Adhesive surfaces were air-abraded and bonded with MDP-containing resin cement. Specimens were subjected to thermocycling (5-55 °C, 5000 cycles); then, mechanical loading (1.2 × 10⁶ cycles, 49 N). Surviving specimens were loaded until failure in the universal testing machine. All specimens were examined under stereomicroscope, and two samples from each group were evaluated using Scanning Electron Microscope. RESULTS Mean failure loads were not significantly different between different framework designs or between two materials. However, IPS e.max ZirCAD Prime showed significantly higher failure rate than Zolid Gen-X during dynamic fatigue (p = 0.009). Samples with D1 design showed higher debonding rate, D2 failed mainly by fracture of the palatal wing and debonding, and D3 failed mainly by fracture of the abutment tooth. Debonded restorations showed mainly mixed failures. CONCLUSION Cantilever IRFDPs with framework designs that maximize adhesion to enamel exhibited promising results. IPS e.max ZirCAD Prime was more susceptible to fractures with the long palatal wing design

Fracture strength of endocrown maxillary restorations using different preparation designs and materials.

PURPOSE This study investigated the impact of preparation design and material types on fracture strength in maxillary premolars endocrowns after thermodynamic aging. MATERIALS AND METHODS Eighty two-rooted maxillary premolar crowns underwent endodontic treatment (N = 80, n = 10). The teeth were categorized into ten groups (4-mm deep with no intracanal extension lithium disilicate glass ceramic & multilayer zirconia endocrowns (LE0 & ZE0); 4-mm deep with 4-mm intracanal extension in one canal (LE1 & ZE1); 4-mm deep with 2-mm intracanal extensions in both canals (LE2 & ZE2); flat overlays with no endocore (LO & ZO); glass fiber reinforced post & core and crown (LC & ZC)). After cementation, all specimens were subjected to 1500 thermocycles and 1,200,000 chewing cycles with an axial occlusal load of 49 N. A static loading test was performed at a non-axial 45° loading using a universal testing machine and failure modes (Type I: restoration debonding; Type II: restoration fracture; Type III: restoration/tooth complex fracture above bone level; Type IV: restoration/tooth complex fracture below bone level) were evaluated using a stereoscope. Data were ananalzed using 2-way ANOVA and Tukey's tests (alpha = 0.05). RESULTS The endocrowns manufactured from multilayered zirconia and pressed lithium disilicate glass ceramic exhibited a fracture load ranging between 1334 ± 332 N and 756 ± 150 N, with ZC presenting the highest and LE2 the lowest values. The differences were not statistically significant (p > 0.05). CONCLUSION All endocrowns tested in this study performed similar considering the different designs and materials tested. The distribution of fracture modes did not differ significantly depending on the design of the restoration and the type of material used

Combustion and emissions characterization of terpenes with a view to their biological production in cyanobacteria

In developing future fuels there is an opportunity to make use of advances in many fields of science and engineering to ensure that such fuels are sustainable in both production and utilization. One such advance is the use of synthetic biology to re-engineer photosynthetic micro-organisms such that they are able to produce novel hydrocarbons directly from CO2. Terpenes are a class of hydrocarbons that can be produced biologically and have potential as liquid transport fuels. This paper presents experimental studies on a compression ignition engine and spark ignition engine in which the combustion and emissions of 12 different terpenes that could potentially be produced by cyanobacteria were assessed as single components and blends with fossil diesel and fossil gasoline. The 12 terpenes were chosen to explore how small changes to the molecular structure of geraniol (a terpene most easily produced by cyanobacteria) impact on combustion and emissions. Furthermore, the toxicity of some of the best performing terpenes were assessed using the model cyanobacterium Synechocystis sp. PCC6803 (hereafter, Synechocystis) as a prelude to a metabolic engineering programme. The compression ignition engine tests were carried out at constant injection timing and constant ignition timing, and the spark ignition engine tests were conducted at a constant spark timing and a constant lambda value of 1. Of the terpenes tested in the compression ignition engine, geranial and farnesene were found to be the best performing single component fuels in terms of combustion and emissions. In blends with fossil diesel, the presence of geranial or farnesene did not have a significant effect on combustion phasing up to a terpene content of 20% (wt/wt), though levels of NOx and CO did increase. In the spark ignition engine experiments of terpene and fossil gasoline blends, citronellene and linalool were found to be soluble in fossil gasoline and combusted in a steady manner up to a terpene content of 45% and 65% (wt/wt) respectively. Of those terpenes with the most potential as either diesel or gasoline fuels, geraniol and geranial were found to be the most toxic to Synechocystis, with farnesene and linalool less toxic and citronellene having no detrimental effect. Addition of n-dodecane to the cultures was found to ameliorate the toxic effects of all five terpenes

Evaluation of Marginal and Internal Fit of Ceramic Laminate Veneers Fabricated with Five Intraoral Scanners and Indirect Digitization.

The long-term success of ceramic laminate veneers (CLVs) is influenced by the marginal and internal fit of the restorations. However, studies comparing the fit of CLVs using different intraoral scanners or the indirect digitization technique are lacking. The purpose of this study was therefore to assess the marginal and internal fit of CAD/CAM-milled CLVs using different intraoral scanners and the indirect digitalization technique. An ivorine typodont maxillary left-central incisor was prepared; the tooth and the neighboring teeth were scanned and used as a template to print ninety 3D partial models. Thereafter, ceramic laminate veneers (CLVs) (N = 90) were milled from IPS-Emax CAD blocks and divided into six equal groups (15 specimens each) according to the type of intraoral scanner (IOS), as follows: Omnicam IOS, SC3600 IOS, Trios 3 IOS, Emerald IOS, I500 IOS. Fifteen further CLVs were fabricated using the conventional indirect digitalization technique. After cementation on the resin dies and embedding in clear epoxy resin, specimens were sectioned inciso-gingivally and mesio-distally. At the incisal and cervical positions, the marginal discrepancy was measured and evaluated in addition to the internal gap at six locations using SEM (200×). Differences between gap measurements among the six groups were determined using ANOVA. Games-Howell multiple comparisons for homogenous variances and LSD multiple comparisons for non-homogenous variances were used with 95% confidence intervals. The significance level was set at 0.05. The lowest mean absolute marginal gap at the incisal margins (AMGI) was recorded for Omnicam group (203.28 ± 80.14) µm, while the highest mean absolute marginal gap at the cervical margins (AMGC) was recorded for Omnicam group (147.16 ± 59.78) µm. The mean AMGC was reported to be significantly different between the conventional technique (146.75 ± 38.43) µm and Trios 3 (91.86 ± (35.51) µm; p = 0.001) and between Emerald (112.37 ± (50.31) µm; p = 0.042) and I500 (86.95 ± (41.55) µm; p 0.05). Marginal gaps were higher in the incisal region compared to the cervical region with both the indirect digitization technique and the IOSs. Ceramic laminate veneers (CLVs) fabricated using IOSs produced overall internal and marginal fit adaptation results comparable to CLVs fabricated from the indirect digitalization method, and both techniques produced clinically acceptable results

Posttraumatic stress disorder predicts poor health-related quality of life in cardiac patients in Palestine

BACKGROUND: The longitudinal association of posttraumatic stress disorder (PTSD) with health-related quality of life (HRQL) in cardiac patients' remains poorly studied, particularly in conflict-affected settings. MATERIALS AND METHODS: For this cohort study, we used baseline and one-year follow-up data collected from patients 30 to 80 years old consecutively admitted with a cardiac diagnosis to four major hospitals in Nablus, Palestine. All subjects were screened for PTSD and HRQL using the PTSD Checklist Specific and the HeartQoL questionnaire. We used a generalized structural equation model (GSEM) to examine the independent predictive association of PTSD at baseline with HRQL at follow-up. We also examined the mediating roles of depression, anxiety, and stress at baseline. RESULTS: The prevalence of moderate-to-high PTSD symptoms among 1022 patients at baseline was 27∙0%. Patients with PTSD symptoms reported an approximate 20∙0% lower HRQL at follow-up. The PTSD and HRQL relationship was largely mediated by depressive and anxiety symptoms. It was not materially altered by adjustment for socio-demographic, clinical, and lifestyle factors. DISCUSSION: Our findings suggest that individuals with a combination of PTSD and depression, or anxiety are potentially faced with poor HRQL as a longer-term outcome of their cardiac disease. In Palestine, psychological disorders are often stigmatized; however, integration of mental health care with cardiac care may offer an entry door for addressing psychological problems in the population. Further studies need to assess the effective mental health interventions for improving quality of life in cardiac patients