Defining New Parameters for Green Engineering Design of Treatment Reactors

This study proposes a green way to design Plug Flow Reactors (PFR) that use biodegradable polymer solutions, capable of contaminant retaining, for industrial wastewater treatment. Usually, to the design of a reactor, the reaction rate is determined by tests on a Continuous Stirred-Tank (CST), these generate toxic effluents and also increase the cost of the design. In this work, empirical expressions (called “slip functions”), in terms of the average concentration of the contaminant, were developed through the study of the transport behaviour of CrVI into solutions of xanthan gum. “In situ” XRμF was selected as a no-invasive micro-technique to determine local concentrations. Slip functions were used with laboratory experiments planned in similar conditions using Plug Flow Reactors, to obtain useful dimensionless parameters for the industrial design

Remoción de Iones Metálicos de Mezclas Binarias Usando Dolomita

In the present work we evaluated the use of dolomite as an alternative for the adsorption of lead and copper ions from their aqueous solutions. The possible interferences between them and the selectivity of the process were studied working with mixtures of these two ions in adsorption processes. From the analysis of the results it can be inferred that the adsorption of lead is not affected by the presence of copper, since no changes in its adsorption capacity are observed as the concentration of the other ion changes. Copper adsorption is not affected by the presence of lead up to a copper level of 130 mg / L. For higher concentrations of copper, the antagonistic competition of Pb is manifested. From the kinetic studies performed at an equimolar concentration of Pb (400 mg / L) and Cu (130 mg / L), it was observed that the presence of copper increases the time required to reach the equilibrium of lead adsorption, but its adsorption capacity is unchanged. For the adsorption of copper the equilibrium time was not modified by the presence of lead.Keywords: Competitive adsorption, binary mixtures, copper, lead

Agroindustrial Waste for Lead and Chromium Biosorption

There is a need to re-evaluate the residues generated in industrial processes for the production of new raw material, reducing the volume of waste. In this regard, the biosorption is a low-cost alternative method for treating effluents compared to conventional methods. The main objectives of this research were: the evaluation of the biosorbent capacity of six waste materials for the extraction of chromium(VI) and lead(II) ions from aqueous solutions and, the determination of the adsorption and kinetic parameters for the more efficient system. The materials evaluated were: peanut shell (Arachis hypagaea), sugarcane bagasse (Saccharum officinarum), avocado peel (Persea americana), pecan nutshell (Carya illinoinensis), wheat bran (Triticum aestivum) and banana peel (Mussa paradisiaca). The highest percentage of lead removal was obtained with wheat bran (89%). For chromium, the percentage was generally much lower compared with lead for all tested biosorbents, the banana peel being the most efficient with a 10% removal. The models that better describe the adsorption processes were: Langmuir and Freundlich. The pseudo-second order kinetic model allowed obtaining the parameters for both systems. The equilibrium time, in both systems, was reached after 60 minutes. The study of Fourier Transformed Infrared spectra and the results of desorption experiments allowed to hypothesize on the mechanisms involved in the adsorption of these metals

Cotton Industry Waste as Adsorbent for Methylene Blue

Removing dyes used in the textile industry from the water bodies is a relevant task because of the importance of their high toxicity. The cotton industry waste is a big problem in the final disposal. Waste cotton fibrils were studied as adsorbent material to treat the coloured effluents of the textile industry. Washing with boiling water was determined as the most efficient method for cleaning. The material was physical characterized. After that, methylene blue adsorption tests were carried out to review the dry removal process at different pH. The Langmuir isotherm and the pseudo-second kinetic order models best described this adsorption process. The results would indicate that the process involve a chemisorptions

Proyecto, investigación e innovación en urbanismo, arquitectura y diseño industrial

Actas de congresoLas VII Jornadas de Investigación “Encuentro y Reflexión” y I Jornadas de Investigación de becarios y doctorandos. Proyecto, investigación e innovación en Urbanismo, Arquitectura y Diseño Industrial se centraron en cuatro ejes: el proyecto; la dimensión tecnológica y la gestión; la dimensión social y cultural y la enseñanza en Arquitectura, Urbanismo y Diseño Industrial, sustentados en las líneas prioritarias de investigación definidas epistemológicamente en el Consejo Asesor de Ciencia y Tecnología de esta Universidad Nacional de Córdoba. Con el objetivo de afianzar continuidad, formación y transferencia de métodos, metodología y recursos se incorporó becarios y doctorandos de los Institutos de investigación. La Comisión Honoraria la integraron las tres Secretarias de Investigación de la Facultad, arquitectas Marta Polo, quien fundó y María del Carmen Franchello y Nora Gutiérrez Crespo quienes continuaron la tradición de la buena práctica del debate en la cotidianeidad de la propia Facultad. Los textos que conforman las VII Jornadas son los avances y resultados de las investigaciones realizadas en el bienio 2016-2018.Fil: Novello, María Alejandra. Universidad Nacional de Córdoba. Facultad de Arquitectura, Urbanismo y Diseño; ArgentinaFil: Repiso, Luciana. Universidad Nacional de Córdoba. Facultad de Arquitectura, Urbanismo y Diseño; ArgentinaFil: Mir, Guillermo. Universidad Nacional de Córdoba. Facultad de Arquitectura, Urbanismo y Diseño; ArgentinaFil: Brizuela, Natalia. Universidad Nacional de Córdoba. Facultad de Arquitectura, Urbanismo y Diseño; ArgentinaFil: Herrera, Fernanda. Universidad Nacional de Córdoba. Facultad de Arquitectura, Urbanismo y Diseño; ArgentinaFil: Períes, Lucas. Universidad Nacional de Córdoba. Facultad de Arquitectura, Urbanismo y Diseño; ArgentinaFil: Romo, Claudia. Universidad Nacional de Córdoba. Facultad de Arquitectura, Urbanismo y Diseño; ArgentinaFil: Gordillo, Natalia. Universidad Nacional de Córdoba. Facultad de Arquitectura, Urbanismo y Diseño; ArgentinaFil: Andrade, Elena Beatriz. Universidad Nacional de Córdoba. Facultad de Arquitectura, Urbanismo y Diseño; Argentin