29,633 research outputs found
Tomography of atomic number and density of materials using dual-energy imaging and the Alvarez and Macovski attenuation model
Dual-energy computed tomography and the Alvarez and Macovski [Phys. Med. Biol. 21, 733 (1976)] transmitted intensity (AMTI) model were used in this study to estimate the maps of density (ρ) and atomic number (Z) of mineralogical samples. In this method, the attenuation coefficients are represented [Alvarez and Macovski, Phys. Med. Biol. 21, 733 (1976)] in the form of the two most important interactions of X-rays with atoms that is, photoelectric absorption (PE) and Compton scattering (CS). This enables material discrimination as PE and CS are, respectively, dependent on the atomic number (Z) and density (ρ) of materials [Alvarez and Macovski, Phys. Med. Biol. 21, 733 (1976)]. Dual-energy imaging is able to identify sample materials even if the materials have similar attenuation coefficients at single-energy spectrum. We use the full model rather than applying one of several applied simplified forms [Alvarez and Macovski, Phys. Med. Biol. 21, 733 (1976); Siddiqui et al., SPE Annual Technical Conference and Exhibition (Society of Petroleum Engineers, 2004); Derzhi, U.S. patent application 13/527,660 (2012); Heismann et al., J. Appl. Phys. 94, 2073–2079 (2003); Park and Kim, J. Korean Phys. Soc. 59, 2709 (2011); Abudurexiti et al., Radiol. Phys. Technol. 3, 127–135 (2010); and Kaewkhao et al., J. Quant. Spectrosc. Radiat. Transfer 109, 1260–1265 (2008)]. This paper describes the tomographic reconstruction of ρ and Z maps of mineralogical samples using the AMTI model. The full model requires precise knowledge of the X-ray energy spectra and calibration of PE and CS constants and exponents of atomic number and energy that were estimated based on fits to simulations and calibration measurements. The estimated ρ and Z images of the samples used in this paper yield average relative errors of 2.62% and 1.19% and maximum relative errors of 2.64% and 7.85%, respectively. Furthermore, we demonstrate that the method accounts for the beam hardening effect in density (ρ) and atomic number (Z) reconstructions to a significant extent.S.J.L., G.R.M., and A.M.K. acknowledge funding through the
DigiCore consortium and the support of a linkage grant
(LP150101040) from the Australian Research Council and
FEI Company
Lunar contour mapping system /lucom/ final report, 5 aug. 1964 - 18 mar. 1965
Radar sensor system for acquisition of lunar surface data - Lunar contour mapping syste
Process and information integration via hypermedia
Success stories for advanced automation prototypes abound in the literature but the deployments of practical large systems are few in number. There are several factors that militate against the maturation of such prototypes into products. Here, the integration of advanced automation software into large systems is discussed. Advanced automation systems tend to be specific applications that need to be integrated and aggregated into larger systems. Systems integration can be achieved by providing expert user-developers with verified tools to efficiently create small systems that interface to large systems through standard interfaces. The use of hypermedia as such a tool in the context of the ground control centers that support Shuttle and space station operations is explored. Hypermedia can be an integrating platform for data, conventional software, and advanced automation software, enabling data integration through the display of diverse types of information and through the creation of associative links between chunks of information. Further, hypermedia enables process integration through graphical invoking of system functions. Through analysis and examples, researchers illustrate how diverse information and processing paradigms can be integrated into a single software platform
signals at LEP2 energies in the Minimal Supersymmetric Standard Model
In this paper we compare and into four-fermion production
at centre-of-mass energies typical of LEP2 and somewhat larger. The theoretical
framework considered is the Minimal Supersymmetric Standard Model. The interest
in exploiting the CERN collider at values of greater than
192 GeV could come from the discovery of Supersymmetric signals during runs at
lower energy. If these indicate that a charged Higgs boson exists in the mass
range \MH\approx95-105 GeV, then a few years of running at
GeV and nominal luminosity could make the detection of such scalars feasible,
in the purely leptonic channel and, for small
\tb's, also in the semi-hadronic(leptonic) one . Charged
Higgs bosons of the above nature cannot be produced by the beam energies
approved at present for LEP2. However, if runs beyond the so-called `192 GeV
cryogenic limit' will be approved by the CERN Council, our selection procedure
will enable us to establish the presence, or otherwise, of charged Higgs bosons
in the mentioned mass rangeComment: 30 pages, latex, epsfig, 12 postscript figures, complete paper
available at ftp://axpa.hep.phy.cam.ac.uk/stefano/cavendish_9615 and at
http://www.hep.phy.cam.ac.uk/theory/papers
Boundary-detection algorithm for locating edges in digital imagery
The author has identified the following significant results. Initial development of a computer program which implements a boundary detection algorithm to detect edges in digital images is described. An evaluation of the boundary detection algorithm was conducted to locate boundaries of lakes from LANDSAT-1 imagery. The accuracy of the boundary detection algorithm was determined by comparing the area within boundaries of lakes located using digitized LANDSAT imagery with the area of the same lakes planimetered from imagery collected from an aircraft platform
Development of computer software to analyze entire LANDSAT scenes and to summarize classification results of variable-size polygons
The Forest Pest Management Division (FPMD) of the Pennsylvania Bureau of Forestry has the responsibility for conducting annual surveys of the State's forest lands to accurately detect, map, and appraise forest insect infestations. A standardized, timely, and cost-effective method of accurately surveying forests and their condition should enhance the probability of suppressing infestations. The repetitive and synoptic coverage provided by LANDSAT (formerly ERTS) makes such satellite-derived data potentially attractive as a survey medium for monitoring forest insect damage over large areas. Forest Pest Management Division personnel have expressed keen interest in LANDSAT data and have informally cooperated with NASA/Goddard Space Flight Center (GSFC) since 1976 in the development of techniques to facilitate their use. The results of this work indicate that it may be feasible to use LANDSAT digital data to conduct annual surveys of insect defoliation of hardwood forests
Soil moisture and evapotranspiration predictions using Skylab data
The author has identified the following significant results. Multispectral reflectance and emittance data from the Skylab workshop were evaluated for prediction of evapotranspiration and soil moisture for an irrigated region of southern Texas. Wavelengths greater than 2.1 microns were required to spectrally distinguish between wet and dry fallow surfaces. Thermal data provided a better estimate of soil moisture than did data from the reflective bands. Thermal data were dependent on soil moisture but not on the type of agricultural land use. The emittance map, when used in conjunction with existing models, did provide an estimate of evapotranspiration rates. Surveys of areas of high soil moisture can be accomplished with space altitude thermal data. Thermal data will provide a reliable input into irrigation scheduling
Stability of bubble nuclei through Shell-Effects
We investigate the shell structure of bubble nuclei in simple
phenomenological shell models and study their binding energy as a function of
the radii and of the number of neutron and protons using Strutinsky's method.
Shell effects come about, on the one hand, by the high degeneracy of levels
with large angular momentum and, on the other, by the big energy gaps between
states with a different number of radial nodes. Shell energies down to -40 MeV
are shown to occur for certain magic nuclei. Estimates demonstrate that the
calculated shell effects for certain magic numbers of constituents are probably
large enough to produce stability against fission, alpha-, and beta-decay. No
bubble solutions are found for mass number A < 450.Comment: 9 pages and 9 figures in the eps format include
Black Holes with a Generalized Gravitational Action
Microscopic black holes are sensitive to higher dimension operators in the
gravitational action. We compute the influence of these operators on the
Schwarzschild solution using perturbation theory. All (time reversal invariant)
operators of dimension six are included (dimension four operators don't alter
the Schwarzschild solution). Corrections to the relation between the Hawking
temperature and the black hole mass are found. The entropy is calculated using
the Gibbons-Hawking prescription for the Euclidean path integral and using
naive thermodynamic reasoning. These two methods agree, however, the entropy is
not equal to 1/4 the area of the horizon.Comment: plain tex(uses phyzzx.tex), 8 pages, CALT-68-185
- …