Photovoltaic systems on dairy farms: Financial and renewable multi-objective optimization (FARMOO) analysis

peer-reviewedThe aim of this study was to develop a financial and renewable multi-objective optimization (FARMOO) method for dairy farms. Due to increased global milk production and European Union policies concerning renewable energy contributions, the optimization of dairy farms from financial and renewable standpoints is crucial. The FARMOO method found the optimal combination of dairy farm equipment and management practices, based on a trade-off parameter which quantified the relative importance of maximizing farm net profit and maximizing farm renewable contribution. A PV system model was developed and validated to assess the financial performance and renewable contribution of this technology in a dairy farming context. Seven PV system sizes were investigated, ranging from 2 kWp to 11 kWp. Multi-objective optimization using a Genetic Algorithm was implemented to find the optimal combination of equipment and management practices based on the aforementioned trade-off parameter. For a test case of a 195 cow spring calving dairy farm in Ireland, it was found that when the relative importance of farm net profit was high, a PV system was not included in the optimal farm configuration. When net profit and renewable contribution were of equal importance, the optimal farm configuration included an 11 kWp PV system with a scheduled water heating load at 10:00. Multi-objective optimization was carried out for the same test case with the goals of maximizing farm net profit and minimizing farm CO2 emissions. Under this scenario, the optimal farm configuration included an 11 kWp PV system when the relative importance of farm net profit was low. This study included a sensitivity analysis which investigated the use of a 40% grant aid on PV system capital costs. This sensitivity analysis did not significantly improve the financial feasibility of PV systems on dairy farms. Moreover, it was found that load shifting of a farm’s water heating enabled the majority of the PV system’s electricity output to be consumed. Hence the use of batteries with small PV systems on dairy farms may not be necessary. The method described in this study will be used to inform policy and provide decision support relating to PV systems on dairy farms.Teagas

Haplotyping the human leukocyte antigen system from single chromosomes

We describe a method for determining the parental HLA haplotypes of a single individual without recourse to conventional segregation genetics. Blood samples were cultured to identify and sort chromosome 6 by bivariate flow cytometry. Single chromosome 6 amplification products were confirmed with a single nucleotide polymorphism (SNP) array and verified by deep sequencing to enable assignment of both alleles at the HLA loci, defining the two haplotypes. This study exemplifies a rapid and efficient method of haplotyping that can be applied to any chromosome pair, or indeed all chromosome pairs, using a single sorting operation. The method represents a cost-effective approach to complete phasing of SNPs, which will facilitate a deeper understanding of the links between SNPs, gene regulation and protein function

Particle Filtering for Sequential Spacecraft Attitude Estimation

A new spacecraft attitude estimation approach using particle filtering is derived. Based on sequential Monte Carlo simulation, the particle filter approximately represents the prob-ability distribution of the state vector with random samples. The filter formulation is based on the star camera measurements using a gyro-based or attitude dynamics-based model for attitude propagation. Modified Rodrigues parameters are used for attitude parametriza-tion when the sample mean and covariance of the attitude are computed. The ambiguity problem associated with the modified Rodrigues parameters in the mean and covariance computation is addressed as well. By using the uniform attitude probability distribution as the initial attitude distribution and using a gradually decreasing measurement variance in the computation of the importance weights, the particle filter based attitude estimator possesses global convergence properties. Simulation results indicate that the particular particle filter, known as bootstrap filter, with as many as 2000 particles is able to converge from arbitrary initial attitude error and initial gyro bias errors as large as 4500 degrees per hour per axis. I

Search For Trapped Antihydrogen

We present the results of an experiment to search for trapped antihydrogen atoms with the ALPHA antihydrogen trap at the CERN Antiproton Decelerator. Sensitive diagnostics of the temperatures, sizes, and densities of the trapped antiproton and positron plasmas have been developed, which in turn permitted development of techniques to precisely and reproducibly control the initial experimental parameters. The use of a position-sensitive annihilation vertex detector, together with the capability of controllably quenching the superconducting magnetic minimum trap, enabled us to carry out a high-sensitivity and low-background search for trapped synthesised antihydrogen atoms. We aim to identify the annihilations of antihydrogen atoms held for at least 130 ms in the trap before being released over ~30 ms. After a three-week experimental run in 2009 involving mixing of 10^7 antiprotons with 1.3 10^9 positrons to produce 6 10^5 antihydrogen atoms, we have identified six antiproton annihilation events that are consistent with the release of trapped antihydrogen. The cosmic ray background, estimated to contribute 0.14 counts, is incompatible with this observation at a significance of 5.6 sigma. Extensive simulations predict that an alternative source of annihilations, the escape of mirror-trapped antiprotons, is highly unlikely, though this possibility has not yet been ruled out experimentally.Comment: 12 pages, 7 figure

Field Measurements of Terrestrial and Martian Dust Devils

Surface-based measurements of terrestrial and martian dust devils/convective vortices provided from mobile and stationary platforms are discussed. Imaging of terrestrial dust devils has quantified their rotational and vertical wind speeds, translation speeds, dimensions, dust load, and frequency of occurrence. Imaging of martian dust devils has provided translation speeds and constraints on dimensions, but only limited constraints on vertical motion within a vortex. The longer mission durations on Mars afforded by long operating robotic landers and rovers have provided statistical quantification of vortex occurrence (time-of-sol, and recently seasonal) that has until recently not been a primary outcome of more temporally limited terrestrial dust devil measurement campaigns. Terrestrial measurement campaigns have included a more extensive range of measured vortex parameters (pressure, wind, morphology, etc.) than have martian opportunities, with electric field and direct measure of dust abundance not yet obtained on Mars. No martian robotic mission has yet provided contemporaneous high frequency wind and pressure measurements. Comparison of measured terrestrial and martian dust devil characteristics suggests that martian dust devils are larger and possess faster maximum rotational wind speeds, that the absolute magnitude of the pressure deficit within a terrestrial dust devil is an order of magnitude greater than a martian dust devil, and that the time-of-day variation in vortex frequency is similar. Recent terrestrial investigations have demonstrated the presence of diagnostic dust devil signals within seismic and infrasound measurements; an upcoming Mars robotic mission will obtain similar measurement types

Observation of exclusive DVCS in polarized electron beam asymmetry measurements

We report the first results of the beam spin asymmetry measured in the reaction e + p -> e + p + gamma at a beam energy of 4.25 GeV. A large asymmetry with a sin(phi) modulation is observed, as predicted for the interference term of Deeply Virtual Compton Scattering and the Bethe-Heitler process. The amplitude of this modulation is alpha = 0.202 +/- 0.028. In leading-order and leading-twist pQCD, the alpha is directly proportional to the imaginary part of the DVCS amplitude.Comment: 6 pages, 5 figure