Local Electronic Structure in AlN Studied by Single-Crystal ²⁷Al and ¹⁴N NMR and DFT Calculations

Both the chemical shift and quadrupole coupling tensors for 14 N and 27 Al in the wurtzite structure of aluminum nitride have been determined to high precision by single-crystal NMR spectroscopy. A homoepitaxially grown AlN single crystal with known morphology was used, which allowed for optical alignment of the crystal on the goniometer axis. From the analysis of the rotation patterns of 14 N ( I=1 ) and 27 Al ( I=5/2 ), the quadrupolar coupling constants were determined to χ(14N)=(8.19±0.02) kHz, and χ(27Al)=(1.914±0.001) MHz. The chemical shift parameters obtained from the data fit were δiso=−(292.6±0.6) ppm and δΔ=−(1.9±1.1) ppm for 14 N, and (after correcting for the second-order quadrupolar shift) δiso=(113.6±0.3) ppm and δΔ=(12.7±0.6) ppm for 27 Al. DFT calculations of the NMR parameters for non-optimized crystal geometries of AlN generally did not match the experimental values, whereas optimized geometries came close for 27 Al with χ¯¯calc=(1.791±0.003) MHz, but not for 14 N with χ¯¯calc=−(19.5±3.3) kHz

Sub-stoichiometric 2D covalent organic frameworks from tri- and tetratopic linkers

Covalent organic frameworks (COFs) are typically designed by breaking down the desired network into feasible building blocks - either simple and highly symmetric, or more convoluted and thus less symmetric. The linkers are chosen complementary to each other such that an extended, fully condensed network structure can form. We show not only an exception, but a design principle that allows breaking free of such design rules. We show that tri- and tetratopic linkers can be combined to form imine-linked [4 + 3] sub-stoichiometric 2D COFs featuring an unexpected bex net topology, and with periodic uncondensed amine functionalities which enhance CO2 adsorption, can be derivatized in a subsequent reaction, and can also act as organocatalysts. We further extend this class of nets by including a ditopic linker to form [4 + 3 + 2] COFs. The results open up possibilities towards a new class of sub-valent COFs with unique structural, topological and compositional complexities for diverse applications

Rational design of carbon nitride photocatalysts by identification of cyanamide defects as catalytically relevant sites

The heptazine-based polymer melon (also known as graphitic carbon nitride, g-C3N4) is a promising photocatalyst for hydrogen evolution. Nonetheless, attempts to improve its inherently low activity are rarely based on rational approaches because of a lack of fundamental understanding of its mechanistic operation. Here we employ molecular heptazine-based model catalysts to identify the cyanamide moiety as a photocatalytically relevant 'defect'. We exploit this knowledge for the rational design of a carbon nitride polymer populated with cyanamide groups, yielding a material with 12 and 16 times the hydrogen evolution rate and apparent quantum efficiency (400 nm), respectively, compared with the unmodified melon. Computational modelling and material characterization suggest that this moiety improves coordination (and, in turn, charge transfer kinetics) to the platinum co-catalyst and enhances the separation of the photogenerated charge carriers. The demonstrated knowledge transfer for rational catalyst design presented here provides the conceptual framework for engineering high-performance heptazine-based photocatalysts

Efficient Recovery of CO2 from Flue Gas by Clathrate Hydrate Formation in Porous Silica Gels

Thermodynamic measurements and NMR spectroscopic analysis were used to show that it is possible to recover CO2 from flue gas by forming a mixed hydrate that removes CO2 preferentially from CO2/N2 gas mixtures using water dispersed in the pores of silica gel. Kinetic studies with 1H NMR microimaging showed that the dispersed water in the silica gel pore system reacts readily with the gas, thus obviating the need for a stirred reactor and excess water. Hydrate phase equilibria for the ternary CO2-N2-water system in silica gel pores were measured, which show that the three-phase hydrate-water-rich liquid-vapor equilibrium curves were shifted to higher pressures at a specific temperature when the concentration of CO2 in the vapor phase decreased. 13C cross-polarization NMR spectral analysis and direct measurement of the CO2 content in the hydrate phase suggested that the mixed hydrate is structure I at gas compositions of more than 10 mol % CO2, and that the CO2 molecules occupy mainly the more abundant 51262 cages. This makes it possible to achieve concentrations of more than 96 mol % CO2 gas in the product after three cycles of hydrate formation and dissociation. 1H NMR microimaging showed that hydrate yields of better than 85%, based on the amount of water, could be obtained in 1 h when a steady state was reached, although ~90% of this yield was achieved after ~20 min of reaction time.NRC publication: Ye

Structural Insights into Poly(Heptazine Imides): A Light-Storing Carbon Nitride Material for Dark Photocatalysis

Solving the structure of carbon nitrides has been a long-standing challenge due to the low crystallinity and complex structures observed within this class of earth-abundant photocatalysts. Herein, we report on two-dimensional layered potassium poly(heptazine imide) (K-PHI) and its proton-exchanged counterpart (H-PHI), obtained by ionothermal synthesis using a molecular precursor route. We present a comprehensive analysis of the in-plane and three-dimensional structure of PHI. Transmission electron microscopy and solid-state NMR spectroscopy, supported by quantum-chemical calculations, suggest a planar, imide-bridged heptazine backbone with trigonal symmetry in both K-PHI and H-PHI, whereas pair distribution function analyses and X-ray powder diffraction using recursive-like simulations of planar defects point to a structure-directing function of the pore content. While the out-of-plane structure of K-PHI exhibits a unidirectional layer offset, mediated by hydrated potassium ions, H-PHI is characterized by a high degree of stacking faults due to the weaker structure directing influence of pore water. Structure–property relationships in PHI reveal that a loss of in-plane coherence, materializing in smaller lateral platelet dimensions and increased terminal cyanamide groups, correlates with improved photocatalytic performance. Size-optimized H-PHI is highly active toward photocatalytic hydrogen evolution, with a rate of 3363 μmol/gh H2 placing it on par with the most active carbon nitrides. K- and H-PHI adopt a uniquely long-lived photoreduced polaronic state in which light-induced electrons are stored for more than 6 h in the dark and released upon addition of a Pt cocatalyst. This work highlights the importance of structure–property relationships in carbon nitrides for the rational design of highly active hydrogen evolution photocatalysts

Enhanced room-temperature Na+ ionic conductivity in Na4.92_{4.92}Y0.92_{0.92}Zr0.08_{0.08}Si4_{4}O12_{12}

Developing cost-effective and reliable solid-state sodium batteries with superior performance is crucial for stationary energy storage. A key component in facilitating their application is a solid-state electrolyte with high conductivity and stability. Herein, we employed aliovalent cation substitution to enhance ionic conductivity while preserving the crystal structure. Optimized substitution of Y3+ with Zr4+ in Na5YSi4O12 introduced Na+ ​ion vacancies, resulting in high bulk and total conductivities of up to 6.5 and 3.3 ​mS ​cm−1, respectively, at room temperature with the composition Na4.92Y0.92Zr0.08Si4O12 (NYZS). NYZS shows exceptional electrochemical stability (up to 10 ​V vs. Na+/Na), favorable interfacial compatibility with Na, and an excellent critical current density of 2.4 ​mA ​cm−2. The enhanced conductivity of Na+ ​ions in NYZS was elucidated using solid-state nuclear magnetic resonance techniques and theoretical simulations, revealing two migration routes facilitated by the synergistic effect of increased Na+ ​ion vacancies and improved chemical environment due to Zr4+ substitution. NYZS extends the list of suitable solid-state electrolytes and enables the facile synthesis of stable, low-cost Na+ ion silicate electrolytes

19F magnetic resonance imaging using vesicles of sucrose octaoleate-F104

A spin-echo technique is employed to produce high quality in vitro 19F magnetic resonance images using vesicles of a highly fluorinated sucrose octaester. The results hold promise for in vivo imaging of the gastrointestinal tract

Efficient storage of hydrogen fuel into leaky cages of clathrate hydrate

We demonstrate an alternative principle to efficiently store molecular hydrogen fuel into clathrate hydrate medium. Hydrogen-free hydrate powders quickly absorb the hydrogen gas at moderate pressure appropriate for industrial applications. The absorption kinetics was observed in situ by nuclear magnetic resonance (NMR) spectroscopy in a pressurized tube. The diffusion of hydrogen through the solid hydrate medium was directly measured by pulsed field gradient NMR. At temperatures down to 250 K, the stored hydrogen is still mobile so that the hydrate storage should work well even in cold environments.NRC publication: Ye