A safe production process of alkylene oxide from alkylene carbonates

Alkylene oxides of low molecular weight, ethylene, and propylene oxides, are widely used in industry. They are used to produce other chemicals and products such as solvents, surfactants, antifreeze, adhesives, polyurethane foams, and pharmaceuticals. They are also used as fumigants in agricultural products and as sterilants for medical equipment and supplies. Unfortunately, it is worth noting that alkylene oxides also possess several physical and health hazards that merit special attention. They are flammable and explosive and their storage and transportation warrant stringent safety rules. The obvious solution to reduce the risk is to generate them from intermediate safety materials only when and only where they are necessary. The literature suggests that correspondent carbonates are very stable precursors. The scope of our study is that of identifying the optimal conditions to generate ethylene and propylene oxide at the moment just before their reaction and uses. The patent deals with some equipment and process conditions that guarantee a fast and reliable dissociation of carbonates in their correspondent oxides. The natural output of the patent is a unit able to provide the dangerous material in situ, under controlled conditions. As a result, all the risks related to transportation and storage are eliminated

Local seismic response studies in the north-western portion of the August 24th, 2016 Mw 6.0 earthquake affected area. The case of Visso village (Central Apennines).

In this work, we investigate the possible causes of the differential damaging observed in Visso village (Central Apennines, about 28 km north from the August 24th, 2016 Mw 6.0 earthquake epicenter). Following insights from the available geological cartography at 1:10.000 scale, a preliminary geophysical survey has been performed in the damaged area in order to constrain geometries and extent of the subsoil lithotypes. Then, these results have been used to retrieve a Vs profile close to the most heavily damaged buildings. This latter has been used as input for a numerical analysis aimed at deriving the motion at the ground level in the study area. In particular, a linear equivalent simulation has been performed by means of EERA code and the waveform has been obtained convolving the time history recorded during the August 24th, 2016 mainshock at Spoleto Monteluco (SPM) site. Our preliminary results indicate a possible correlation of damaging to the thickness and shape of the geological units. Nevertheless, further analyses are necessary to highlight any 2D basin and / non- linear soil behaviour effects in order to compare them to the intrinsic buildings vulnerability, according to the EMS98 guidelines

Thermo-responsive polymers as surface active compounds: A review

The great versatility and controllable properties that characterize polymeric materials allowed their spreading to many different areas. In the last years, this outstanding adaptability was even amplified by the introduction of smart polymers, i.e. materials able to sharply and often reversibly change their physico-chemical properties in response to external stimuli. In particular, the possibility of applying thermal stimuli in a controlled and simple way, coupled with the natural occurrence of thermal gradients, made thermo-responsive polymers particularly appealing, as they allowed to conceive applications that were not even imaginable for traditional materials. In this review we discuss the great potentialities of thermo-responsive polymers when used to functionalize a target surface or interface. The discussion will cover significant areas of interest where this class of materials has been employed, including cell culture, chromatography, colloidal stabilization and enhanced oil recovery. Many examples from the literature are reported in order to present the state of the art, the main advantages of this technology over conventional materials and the expected future developments. Moreover, some successful examples highlighting the innovative functionalities achievable by these active surfaces are presented

Environmental education about grassland biodiversity, pasture management and research social utility

Dry grassland ecosystems represent a fundamental resource of plant species richness and are defined as ‘habitat of priority importance’ for nature conservation by EU, in particular as orchid species concerns. Biodiversity conservation depends on key elements such as habitat productivity, plant species functional features, type of management, density and grazing behaviour of herbivores. Information about the aforementioned interactions can offer key knowledge to promote grassland biodiversity conservation and for management decision making, and may help to improve the governance of economic benefit as indicated by EU agricultural policies. In this perspective, the dissemination of information could be a paramount tool to understand the importance of environmental scientific researches for the territory development. In the Marche Region, the agri-environmental project for the biodiversity guardianship comes from the grassland research activities, provided economic aid to the farmer that manages the natural grassland systems in agreement with European Community guidelines for the biodiversity maintenance and the use of animals for habitat prevention/maintaining. Research projects have been turned into an environmental educational project aimed to educate and sensitise the primary school children to the environmental issues, in addition to show the social utility of research. Our environmental educational project was carried out by means of the following steps: - definition of biodiversity and ecosystem, - illustration of grassland plant and animal biodiversity, - biodiversity threats and their interplay with other environmental, social and economic issues, - example of research project leading with biodiversity conservation, animal welfare and zootechnic activities. Students of the first university degree in Natural and Environmental Sciences participated to the project with the aim to acquire specific competences about scientific dissemination. Children have shown great involvement and attention towards environmental problems

A novel process for recovery and exploitation of polyesters and polyamides from waste polymeric artifacts

Plastic waste is one of the world's biggest sources of pollution. Despite the growing trend towards recycling, there are currently no effective technologies to offset the continuous increase in plastic production. Polyesters and polyamides are among the most widely produced single-use plastics, mainly used in the manufacture of textiles and soft drink bottles. Currently, only a small proportion of these polymers can be effectively recycled. The two primary methods employed for this purpose are mechanical and chemical recycling. Presently, mechanical recycling remains the more widely adopted process within the industrial sector. However, the treatment process is limited to a narrow range of waste materials as it is impossible to remove dyes and the mechanical properties deteriorate due to incompatibility between different plastic materials. Another critical limit of this recycling technology is the limited number of recycling loops that can be done due to the thermal degradation that occurs during the extrusion process. The alternative option is chemical recycling, which allows the depolymerization of the original product to recover the monomers directly. The main drawbacks are the long reaction times and the many solvents needed to achieve high-purity products. As a results, chemical recycling is only economically feasible for large companies that can produce the virgin polymer in situ. In this work, a new technology has been patented. This process consists of three main steps. The first one is the distillation-assisted cyclodepolymerization (DA-CDP), introduced as a modification of the CDP process. In this unit, cyclic oligomers together with high molecular weight compounds are produced. Then, after polymer purification, it is possible to achieve the same molecular weight as the initial polymer in less than 30 min, exploiting the ring-opening polymerization (ROP) of the next step

Functionalized lactic acid macromonomers polycondensation

Please click Additional Files below to see the full abstrac

Super hygroscopic non-stoichiometric cerium oxide particles as electrode component for PEM fuel cells

The design of highly efficient promoters for the oxygen reduction reaction (ORR) is an important challenge in the large-scale distribution of proton exchange membrane (PEM) fuel cells. Hygroscopic cerium oxide (CeO2) is here proposed as co-catalyst in combination with Pt. Physical chemical characterizations, by means of X-ray diffraction, vibrational spectroscopy, morphological and thermal analyses, were carried out, demonstrating high water affinity of the synthesized CeO2 nanoparticles. Composite catalysts (i. e., Pt : CeO2 1 : 0.5 and 1 : 1 wt:wt), were studied by either rotating disk electrode (RDE) and fuel cell tests performed at 80 °C and 110 °C. Interestingly, the cell adopting the Pt : CeO2 1 : 0.5 catalyst enabled the achievement of high power densities reaching ∼80 and ∼35 mW cm−2 under low relative humidity and high temperatures. This result demonstrates that tuning material surface properties (e. g. oxygen vacancies) could significantly boost the electrochemical performance of cathodes as a combined result of optimized water retention and improved ORR kinetic

Evaluation of site effects by means of 3D numerical modeling of the Palatine Hill, Roman Forum, and Coliseum archaeological area

In this study we perform 3D nonlinear analyses of seismic site response of the Central Archaeological Area of Rome, which includes the Palatine Hill, Roman Forum, Circus Maximus, and Coliseum. The geological bedrock of the study area is constituted by a Pliocene marine sandy-clayey unit (MonteVaticano Formation, MVA). At top of this unit a continental Quaternary succession is superimposed. Previous studies available for this area (Pagliaroli et al. 2014a; Mancini et al. 2014; Moscatelli et al. 2014) enabled to define a detailed three-dimensional reconstruction of the subsoil conditions, characterized by complex surficial and buried morphology, lateral heterogeneities and dynamic properties of involved material, natural as well as anthropogenic. The area of Rome is affected by earthquakes from different seismogenic districts: i) the central Apennine mountain chain (D = 90–130km and M = 6.7–7.0); ii) the Colli Albani volcanic district (D = 20km and M=5.5); iii) Rome area itself, which is characterized by rare, shallow, low-magnitude events (M < 5). Both natural and artificial signals have been considered to define the input motion for the numerical modeling of the site response of the whole archeological area. This was accomplished by means of the finite differences code FLAC3D. To evaluate the seismic hazard and, consequently, to assess possible priorities for seismic retrofitting of the monuments, contour maps of Housner intensity amplification ratio FH (defined as the ratio between Housner intensity at the top of the model and the corresponding input at the bedrock outcrop), are carried out. To cover the entire range of natural periods pertaining to the monuments in the examined area, FH was evaluated over three ranges of period: 0.1–0.5s, 0.5–1.0s, and 1.0–2.0s. Numerical results shown that: 1) within the range of periods 0.1–0.5s, high values of FH = 2.2–2.6 occur both in correspondence of narrow valleys filled with soft alluvial deposits and at top of Palatine Hill; 2) within the range of periods 0.5–1.0s, high values of FH occur in correspondence of the deepest valleys; 3) within the range of periods 1.0–2.0s, low values of FH occur except in correspondence of the deepest valleys.Results show a good agreement with the previous 2D numerical modeling and with the microzonation maps (Pagliaroli et al 2014a, b), even if interesting differences show up highlighting the usefulness of 3D modeling in such complex settings. Such results are significantly relevant for the monumental and archaeological heritage of this area, as it is highly vulnerable due to its old age and state of conservation

Preliminary tests on PEG-based thermoresponsive polymers for the production of 3D bioprinted constructs

In the last years, the growing demand for tissues and organs led to the development of novel techniques, such as 3D bioprinting. This technique proved to be promising for both patient-specific and custom-made applications when using autologous cells, and for the creation of standardized models that in the future could be used for instance for high-throughput drug screening. Within this context, the formulation of bioinks that could provide reliable, reproducible, and replicable structures with good mechanical properties and high biocompatibility is a crucial challenge. In this work, the use of a thermoresponsive PEG-based formulation was investigated as a bioink, allowing its use for 4D bioprinting applications triggered by thermal changes. First, the polymer was synthesized by reversible addition-fragmentation chain transfer polymerization (RAFT), which allows for optimal control over the final properties of the polymer. Then, the printability for extrusion-based bioprinting of this formulation was assessed through in-situ imaging. Finally, the use of this polymer as bioink was tested by encapsulation of endothelial cells and evaluating cell distribution within the construct

In-situ monitoring of defects in extrusion-based bioprinting processes using visible light imaging

Tissue engineering techniques are central for the development of biomedical scaffolds, which are primarily employed in the biofabrication of various artificial human tissue and organ models. Bioprinting is a new technique of creating tissue constructs that can sustain cell proliferation. The development of printing techniques proceeds together with the development of the biomaterials to be printed, which is why studying the printability of these specific biomaterials must be explored. An appropriate hydrogel used as bioink should have numerous rheological, mechanical, and biological properties for producing appropriate tissue constructs. However, reaching the right trade-off between a desirable bioactivity and high printability is challenging, and despite numerous optimization studies for different materials, printing defects often occur during printing. Herein, methods are proposed to automatically identify these drifting processes in commonly used geometries and how they affected subsequent layers, as well as printing defects within each layer. Several structures were printed with standard commercial bioink as proof of concept. The constructs were analyzed using optical images from a coaxial camera. The images were then digitally processed to get geometrical data from which patterns of defectology to be monitored were derived. This automation should decrease the time in post-processing characterization of constructs and should provide a standardized tool to compare different bioinks