Investigation of Thermal Performance of Cylindrical Heatpipes Operated with Nanofluids

Nanofluids as an innovative class of heat transfer fluids created by dispersing nanometre-sizedmetallic or non-metallic particles in conventional heat transfer fluids displayed the potential toimprove the thermophysical properties of the heat transfer fluids. The main purpose of this study is toinvestigate the influence of the use of nanofluids on two-phase heat transfer, particularly on thethermal performance of the heat pipes. In the first stage, the properties of the nanofluids were studied,then, these nanofluids were used as the working fluids of the heat pipes. The thermal performance ofthe heat pipes when using different nanofluids was investigated under different operating conditionsexperimentally and analytically. The influences of the concentration of the nanofluids, inclinationangles and heat loads on the thermal performance and maximum heat flux of the heat pipes wereinvestigated.This study shows that the thermal performance of the heat pipes depends not only on thermophysicalproperties of the nanofluids but also on the characteristics of the wick structure through forming aporous coated layer on the heated surface. Forming the porous layer on the surface of the wick at theevaporator section increases the wettability and capillarity and also the heat transfer area at theevaporator of the heat pipes.The thermal performance of the heat pipes increases with increasing particle concentration in all cases,except for the heat pipe using 10 wt.% water/Al2O3 nanofluid. For the inclined heat pipe, irrespectiveof the type of the fluid used as the working fluid, the thermal resistance of the inclined heat pipes waslower than that of the heat pipes in a horizontal state, and the best performance was observed at theinclination angle of 60o, which is in agreement with the results reported in the literature. Otheradvantages of the use of nanofluids as the working fluids of the heat pipes which were investigated inthis study were the increase of the maximum heat flux and also the reduction of the entropy generationof the heat pipes when using a nanofluid.These findings revealed the potential for nanofluids to be used instead of conventional fluids as theworking fluid of the heat pipes, but the commercialization of the heat pipes using nanofluids for largescale industrial applications is still a challenging question, as there are many parameters related to thenanofluids which are not well understood.QC 20170228</p

Investigation of Thermal Performance of Cylindrical Heatpipes Operated with Nanofluids

Nanofluids as an innovative class of heat transfer fluids created by dispersing nanometre-sizedmetallic or non-metallic particles in conventional heat transfer fluids displayed the potential toimprove the thermophysical properties of the heat transfer fluids. The main purpose of this study is toinvestigate the influence of the use of nanofluids on two-phase heat transfer, particularly on thethermal performance of the heat pipes. In the first stage, the properties of the nanofluids were studied,then, these nanofluids were used as the working fluids of the heat pipes. The thermal performance ofthe heat pipes when using different nanofluids was investigated under different operating conditionsexperimentally and analytically. The influences of the concentration of the nanofluids, inclinationangles and heat loads on the thermal performance and maximum heat flux of the heat pipes wereinvestigated.This study shows that the thermal performance of the heat pipes depends not only on thermophysicalproperties of the nanofluids but also on the characteristics of the wick structure through forming aporous coated layer on the heated surface. Forming the porous layer on the surface of the wick at theevaporator section increases the wettability and capillarity and also the heat transfer area at theevaporator of the heat pipes.The thermal performance of the heat pipes increases with increasing particle concentration in all cases,except for the heat pipe using 10 wt.% water/Al2O3 nanofluid. For the inclined heat pipe, irrespectiveof the type of the fluid used as the working fluid, the thermal resistance of the inclined heat pipes waslower than that of the heat pipes in a horizontal state, and the best performance was observed at theinclination angle of 60o, which is in agreement with the results reported in the literature. Otheradvantages of the use of nanofluids as the working fluids of the heat pipes which were investigated inthis study were the increase of the maximum heat flux and also the reduction of the entropy generationof the heat pipes when using a nanofluid.These findings revealed the potential for nanofluids to be used instead of conventional fluids as theworking fluid of the heat pipes, but the commercialization of the heat pipes using nanofluids for largescale industrial applications is still a challenging question, as there are many parameters related to thenanofluids which are not well understood.QC 20170228</p

Thermal performance of screen mesh heat pipe with Al2O3 nanofluid

This study presents the effect of Al2O3 nanofluid (NF) on thermal performance of screen mesh heat pipe in cooling applications. Three cylindrical copper heat pipes of 200 mm length and 6.35 mm outer diameter containing two layers of screen mesh were fabricated and tested with distilled water and water based Al2O3 NF with mass concentrations of 5% and 10% as working fluids. To study the effect of NF on the heat pipes thermal performance, the heat input is increased and then decreased consecutively and the heat pipes surface temperatures are measured at steady state conditions. Results show that using 5 wt.% of Al2O3 NF improves the thermal performance of the heat pipe for increasing and decreasing heat fluxes compared with distilled water, while utilizing 10 wt.% of Al2O3 NF deteriorates the heat pipe thermal performance. For heat pipe with 5 wt.% Al2O3 NF the reduction in thermal resistance of the heat pipe is found to be between 6% and 24% for increasing and between 20% and 55% for decreasing heat fluxes, while the thermal resistance increased between 187% and 206% for increasing and between 155% and 175% for decreasing steps in heat pipe with 10 wt.% of Al2O3 NF.Qc 20150507</p