Multi-cut Solutions in Chern-Simons Matrix Models

We elaborate the Chern-Simons (CS) matrix models at large $N$. The saddle point equations of these matrix models have a curious structure which cannot be seen in the ordinary one matrix models. Thanks to this structure, an infinite number of multi-cut solutions exist in the CS matrix models. Particularly we exactly derive the two-cut solutions at finite 't\,Hooft coupling in the pure CS matrix model. In the ABJM matrix model, we argue that some of multi-cut solutions might be interpreted as a condensation of the D2-brane instantons.Comment: 25 pages, 9 figures; v2: published version, minor change

Superovulation with an anti-inhibin monoclonal antibody improves the reproductive performance of rat strains by increasing the pregnancy rate and the litter size

繁殖効率を高めたラットの作り方--50年以上実現できなかった過排卵妊娠に成功--京都大学プレスリリース. 2024-05-02.Rats are multiparous rodents that have been used extensively in research; however, the low reproductive performance of some rat strains hampers the broader use of rats as a biomedical model. In this study, the possibility of increasing the litter size after natural mating in rats through superovulation using an anti-inhibin monoclonal antibody (AIMA) was examined. In outbred Wistar rats, AIMA increased the number of ovulated oocytes by 1.3-fold. AIMA did not affect fertilization and subsequent embryonic development, resulting in a 1.4-fold increase in litter size and a high pregnancy rate (86%). In contrast, conventional superovulation by eCG/hCG administration decreased the pregnancy rate to 6–40% and did not increase the litter size. In inbred Brown Norway rats, AIMA increased the litter size by 1.2-fold, and the pregnancy rate increased more than twice (86% versus 38% in controls). AIMA also increased the litter size by 1.5-fold in inbred Tokai High Avoiders and Fischer 344 rats. AIMA increased the efficiency of offspring production by 1.5-, 2.7-, 1.4-, and 1.4-fold, respectively, in the four rat strains. Thus, AIMA may consistently improve the reproductive performance through natural mating in rats, which could promote the use of AIMA in biomedical research

Computer-aided Surgical Planning of Anterior Cruciate Ligament Reconstruction in MR Images

AbstractAnterior cruciate ligament (ACL) injury causes knee joint instability, and effects on sports performance. Therefore, ACL reconstruction is essential to keep their high performance. It is well known that the outcome of ACL reconstruction is strongly related to the placement and orientation of the bone tunnel. Therefore, optimization of tunnel drilling technique is an important factor to obtain satisfactory surgical results. Current procedure relies on arthroscopic evaluation and there is a risk of damaging arteries and ligaments during surgery. The damages may reduce the accuracy and reproducibility of ACL reconstruction. As a postoperative evaluation method, a quadrant method has been used to evaluate the placement and orientation of the bone tunnel in X-ray radiography. This study proposes a computer-aided surgical planning system for evaluating ACL insertion site and orientation using magnetic resonance (MR) images. We first introduce MR image based the quadrant method to determine the ACL insertion site for preoperative patients. It also evaluates the 3-D spatial relationship between the planning femoral drilling hole and arteries around the femoral condyle. This system has been applied to ACL injured patients, it may increase the accuracy and reproducibility of ACL bone tunnel, and it can evaluate a risk of damaging the surrounding arteries and ligaments

Perioperative Clinical Course Variables Associated with Length of Hospital Stay after Primary Intracranial Meningioma Resection

The relationship between perioperative clinical course variables and postoperative length of hospital stay (LOS) in patients undergoing primary intracranial meningioma resection has not been fully elucidated. We therefore aimed to identify the perioperative clinical course variables that predict postoperative LOS in such patients. We retrospectively collected data concerning demographics, tumor characteristics, and perioperative clinical course variables in 76 patients who underwent primary intracranial meningioma resection between January 2010 and December 2019, and tested for associations with postoperative LOS. Univariate analyses showed that younger age, fewer days to postoperative initiation of standing/walking, preoperative independence in activities of daily living (ADL), and ADL independence one week after surgery were associated with shorter postoperative LOS. Multiple regression analyses with these factors identified that days to stand/walk initiation and ADL independence one week after surgery were associated with postoperative LOS. Based on these results, we conclude that rehabilitation programs that promote early mobilization and the early acquisition of independence may reduce postoperative LOS in patients who undergo primary intracranial meningioma resection

Analysis of the Optimum Tapering Angle in Microanastomosis Using Computational Fluid Dynamics

Background: In free flap transfer, size discrepancy between the vascular pedicle and recipient vessel can create a problem for microsurgeons and sometimes induces postoperative thrombus formation. When there is a major difference between the diameters of the vascular pedicle and the recipient vessel, the larger vessel is often tapered to perform the anastomosis properly. However, the decision on the tapering angle used depends mostly on the operator’s experience. In this study, computational fluid dynamics (CFD) was used to investigate the optimum tapering angle. Methods: Using ANSYS ICEM 16.0 (ANSYS Japan, Tokyo, Japan), simulated vessels of diameters 1.5 mm and 3.0 mm were designed and then used to produce four anastomosis models with the 3.0-mm vessel tapered at angles of 15º, 30º, 60º, and 90º (no tapering). Venous perfusion with a mean value of 13.0 mL/min was simulated, and this was passed through the four anastomosis models in both the forward direction (F), from the smaller to the larger vessel, and the retrograde direction (R), from the larger to the smaller vessel. The velocity, wall shear stress (WSS), and oscillatory shear index (OSI) were measured in these eight patterns and then analyzed using OpenFOAM version 5. Results: The decrease in velocity was limiting. The WSS was greater in the R direction than the F direction at every tapering angle. The OSI also tended to be almost the same in the F direction, and lower at smaller tapering angles in the R direction. And, it was greater in the F direction than in the R direction at every tapering angle. The OSI values for 15º and 30º were almost identical in the R direction. Conclusion: The risk of thrombus formation is thought to be lower when tapering is used for anastomosis if the direction of flow is from the larger to the smaller vessel, rather than vice versa. These results also suggest that the optimum tapering angle is approximately 30º in both directions

Model experiment of magnetic field amplification in laser-produced plasmas via the Richtmyer-Meshkov instability

A model experiment of magnetic field amplification (MFA) via the Richtmyer-Meshkov instability (RMI) in supernova remnants (SNRs) was performed using a high-power laser. In order to account for very-fast acceleration of cosmic rays observed in SNRs, it is considered that the magnetic field has to be amplified by orders of magnitude from its background level. A possible mechanism for the MFA in SNRs is stretching and mixing of the magnetic field via the RMI when shock waves pass through dense molecular clouds in interstellar media. In order to model the astrophysical phenomenon in laboratories, there are three necessary factors for the RMI to be operative: a shock wave, an external magnetic field, and density inhomogeneity. By irradiating a double-foil target with several laser beams with focal spot displacement under influence of an external magnetic field, shock waves were excited and passed through the density inhomogeneity. Radiative hydrodynamic simulations show that the RMI evolves as the density inhomogeneity is shocked, resulting in higher MFA

Effect of irradiation uniformity on quasi-isentropic shock compression of solid spheres

Takizawa R., Sakagami H., Nagatomo H., et al. Effect of irradiation uniformity on quasi-isentropic shock compression of solid spheres. High Energy Density Physics 52, 101124 (2024); https://doi.org/10.1016/j.hedp.2024.101124.In inertial confinement fusion using central ignition, the ignition hot spot is generated through self-heating during fuel compression. In contrast, fast ignition creates the hot spot through external heating. This difference allows the fast ignition approach to use a solid sphere as the fusion fuel shape. The implosion of a solid sphere is one form of laser-direct-drive slow implosion. Solid sphere fuel exhibits tolerance to hydrodynamic instability and can be mass-produced relatively easily, offering significant advantages for developing inertial fusion energy. Achieving high fuel peak and areal densities of with a solid sphere requires quasi-isentropic compression, which involves multiple shock waves. Our results show the critical role of uniform laser irradiation in initiating weak shock waves in the early phase, which is essential for forming a uniform and dense fuel core with solid spheres. Furthermore, dynamically adjusting the laser spot diameter could be crucial in optimizing the effectiveness of laser-direct-drive and fast ignition techniques when using solid sphere fuel

Toward the construction of the general multi-cut solutions in Chern-Simons matrix models

publishe

Efficient derivation of knock-out and knock-in rats using embryos obtained by in vitro fertilization

「誰でも」「簡単に」「効率よく」モデルラットを作出できる技術を開発. 京都大学プレスリリース. 2019-08-22.Rats are effective model animals and have contributed to the development of human medicine and basic research. However, the application of reproductive engineering techniques to rats is not as advanced compared with mice, and genome editing in rats has not been achieved using embryos obtained by in vitro fertilization (IVF). In this study, we conducted superovulation, IVF, and knock out and knock in using IVF rat embryos. We found that superovulation effectively occurred in the synchronized oestrus cycle and with anti-inhibin antiserum treatment in immature rats, including the Brown Norway rat, which is a very difficult rat strain to superovulate. Next, we collected superovulated oocytes under anaesthesia, and offspring derived from IVF embryos were obtained from all of the rat strains that we examined. When the tyrosinase gene was targeted by electroporation in these embryos, both alleles were disrupted with 100% efficiency. Furthermore, we conducted long DNA fragment knock in using adeno-associated virus and found that the knock-in litter was obtained with high efficiency (33.3–47.4%). Thus, in this study, we developed methods to allow the simple and efficient production of model rats