Evaluation of direct analysis for trace elements in tea and herbal beverages by ICP-MS

In general, inductively coupled plasma mass spectrometry (ICP-MS) food analysis requires numerous sample treatment steps that imply an increase of analysis time and the use of chemicals. In this study, the main objective was to evaluate the applicability of the direct analysis by ICP-MS to determine twelve elements (Al, As, Ba, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Se and Zn) in tea and herbal beverages. Direct analysis method was compared with two other sample treatments: minimum treatment (acid dilution) and using a destructive method (microwave assisted digestion). Besides the lowest time of analysis, direct analysis provides a reliable response and agrees with the “green chemistry” principles. High sensitivity was also observed by low values of limits of detection and quantification, in general, below 2.5 µg L-1. The method accuracy was evaluated by spiked experiments and values ranged between 82 and 120%. Low values of coefficient of variation were also observed, 2 to 17%, for all analytes. The method exhibited applicability for commercial tea samples as well as for drinks made by herb infusion26612111217CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO - CNPQCOORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL DE NÍVEL SUPERIOR - CAPESFUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO - FAPESPsem informaçãosem informação2012/19142-

A comprehensive investigation of the mineral composition of brazilian bee pollen: geographic and seasonal variations and contribution to human diet

The mineral composition of bee pollen was investigated in 154 samples from different Brazilian regions. Ca, Cu, Fe, K, Mg, Mn, Na, P, Se and Zn were determined by ICP OES after microwave mineralization. Employing optimized instrumental parameters, the method was shown to have a good precision and accuracy for the simultaneous determination of minerals. Overall, samples from the Northeastern states presented significantly higher amounts of minerals and showed constant production throughout the year. Manganese, Se, Cu, Zn and Fe were the elements that showed the greatest possible contributions to the diet, contributing with 70, 37, 27, 17 and 17%, respectively, of the Brazilian recommended daily intake. Principal component analysis (PCA) was applied to study geographic effects. The elements Ca, Cu, Fe, K, Mg, Mn, Na, P and Zn were important in explaining the classification of pollen according to their geographical origin. The mineral levels varied widely during the year.A composição de minerais foi investigada em 154 amostras de pólen apícola, provenientes de diferentes regiões do Brasil. A técnica de ICP OES foi utilizada para determinar Ca, Cu, Fe, K, Mg, Mn, Na, P, Se e Zn, após mineralização em sistema de microondas. Utilizando parâmetros instrumentais otimizados conseguiu-se boa exatidão e precisão na determinação simultânea dos minerais. Em geral, as amostras dos estados do Nordeste apresentaram teores de minerais mais elevados e produção constante durante o ano. Os minerais Mn, Se, Cu, Zn, Fe são os que poderiam ter maior contribuição na dieta, podendo atingir 70, 37, 27, 17 e 17%, respectivamente, da ingestão dietética diária recomendada no Brasil. A análise de componentes principais mostrou que Ca, Cu, Fe, K, Mg, Mn, Na, P e Zn podem ser usados na classificação do pólen nacional em função da origem geográfica. Os teores dos minerais variaram amplamente ao longo do ano.727736Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq

Determination of total sugar in raw coffee using near infrared spectroscopy and pls regression

In this work a fast method for the determination of the total sugar levels in samples of raw coffee was developed using the near infrared spectroscopy technique and multivariate regression. The sugar levels were initially obtained using gravimety as the reference method. Later on, the regression models were built from the near infrared spectra of the coffee samples. The original spectra were pre-treated according to the Kubelka-Munk transformation and multiplicative signal correction. The proposed analytical method made possible the direct determination of the total sugar levels in the samples with an error lower by 8% with respect to the conventional methodology.34635

A comprehensive investigation of the mineral composition of brazilian bee pollen: geographic and seasonal variations and contribution to human diet

The mineral composition of bee pollen was investigated in 154 samples from different Brazilian regions. Ca, Cu, Fe, K, Mg, Mn, Na, P, Se and Zn were determined by ICP OES after microwave mineralization. Employing optimized instrumental parameters, the method was shown to have a good precision and accuracy for the simultaneous determination of minerals. Overall, samples from the Northeastern states presented significantly higher amounts of minerals and showed constant production throughout the year. Manganese, Se, Cu, Zn and Fe were the elements that showed the greatest possible contributions to the diet, contributing with 70, 37, 27, 17 and 17%, respectively, of the Brazilian recommended daily intake. Principal component analysis (PCA) was applied to study geographic effects. The elements Ca, Cu, Fe, K, Mg, Mn, Na, P and Zn were important in explaining the classification of pollen according to their geographical origin. The mineral levels varied widely during the year

Trace elements in Camellia sinensis marketed in southeastern Brazil: Extraction from tea leaves to beverages and dietary exposure

The presence of Al, As, Ba, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Se, and Zn in 30 samples of tea (Camellia sinensis) purchased from markets in southeastern Brazil were evaluated by ICP-MS. This study was performed for both tea leaves and their infusions. The results provide data that permits an evaluation of the exposure or dietary intake of these trace elements. For some samples, the levels in the tea leaves were above the standards established by the Brazilian and MERCOSUL regulatory bodies. For example, As was detected in 33% of the red oolong tea samples and Pb was detected in 67% and 100% of the white and red oolong samples, respectively. Although some of these tea leave samples possessed high toxic elements levels, the concentrations of the trace elements in the infusions were measured to be at safe levels. An evaluation of dietary intake demonstrated the remarkable importance of tea in achieving the daily intake of manganese. Indeed, a single cup of green tea may provide 16% of the daily value established by FDA. Principal component analysis classified the tea into three distinct groups on the basis of the inorganic constituents in the tea leaves68491498CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO - CNPQFUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO - FAPESP573894/2008-62012/19142-7; 2008/57808-

Avaliação físico-química de águas minerais comercializadas na região de Campinas, SP

Com o objetivo de avaliar a qualidade de águas minerais, foram analisadas amostras, adquiridas em supermercados, de oito fontes localizadas no Estado de São Paulo entre agosto de 1999 e maio de 2000, com coletas trimestrais. Os resultados das análises físico-químicas mostraram que as amostras possuíam, em sua maioria, composição química dentro dos limites permitidos pela legislação brasileira, exceto quatro amostras, que apresentaram resultados na análise de cor acima de 5 unidades PtCo, uma amostra com pH fora da faixa recomendada de 4,0 a 9,0 e uma amostra com alcalinidade em hidróxidos em duas épocas de análise. Os resultados obtidos para as diferentes amostras variaram de acordo com as seguintes faixas: pH de 6,39 a 9,92, alcalinidade de 0,0 a 189,1mg L-1 de bicarbonato, dureza de 0,00 a 136,00mg L-1 de carbonato de cálcio, cor de 0,0 a 9,0 unidades de PtCo, turbidez de 0,00 a 2,00 FTU de turvação, sulfato de 0,00 a 55,67mg L-1, sulfeto de 0,00 a 0,002mg L-1, cloreto de 0,00 a 23,53mg L-1, fluoreto de 0,02 a 0,8mg L-1, alumínio de 0,01 a 0,09mg L-1, bário de 0,00 a 0,26mg L-1, cálcio de 0,53 a 28,35mg L-1, crômio de 0,00 a 0,01mg L-1, ferro de 0,00 a 0,03mg L-1, potássio de 0,39 a 3,27mg L-1, sódio de 0,53 a 97,29mg L-1, magnésio de 0,00 a 9,10mg L-1, manganês de 0,00 a 0,05mg L-1, zinco de 0,00 a 0,03mg L-1, chumbo de 0,00 a 0,01mg L-1 e lítio de 0,00 a 0,02mg L-1. Os elementos cádmio, cobre e cobalto apresentaram-se abaixo dos limites de detecção dos métodos