Time-resolved fuel injector flow characterisation based on 3D laser Doppler vibrometry

In order to enable investigations of the fuel flow inside unmodified injectors, we have developed a new experimental approach to measure time-resolved vibration spectra of diesel nozzles using a three dimensional laser vibrometer. The technique we propose is based on the triangulation of the vibrometer and fuel pressure transducer signals, and enables the quantitative characterisation of quasi-cyclic internal flows without requiring modifications to the injector, the working fluid, or limiting the fuel injection pressure. The vibrometer, which uses the Doppler effect to measure the velocity of a vibrating object, was used to scan injector nozzle tips during the injection event. The data were processed using a discrete Fourier transform to provide time-resolved spectra for valve-closed-orifice, minisac and microsac nozzle geometries, and injection pressures ranging from 60 to 160MPa, hence offering unprecedented insight into cyclic cavitation and internal mechanical dynamic processes. A peak was consistently found in the spectrograms between 6 and 7.5kHz for all nozzles and injection pressures. Further evidence of a similar spectral peak was obtained from the fuel pressure transducer and a needle lift sensor mounted into the injector body. Evidence of propagation of the nozzle oscillations to the liquid sprays was obtained by recording high-speed videos of the near-nozzle diesel jet, and computing the fast Fourier transform for a number of pixel locations at the interface of the jets. This 6-7.5kHz frequency peak is proposed to be the natural frequency for the injector's main internal fuel line. Other spectral peaks were found between 35 and 45kHz for certain nozzle geometries, suggesting that these particular frequencies may be linked to nozzle dependent cavitation phenomena.Comment: 12 pages, 10 figure

Measuring and processing in-cylinder measurements of NO and OH obtained by laser-induced fluorescence in a diesel rapid compression machine

A strong argument culture is characterized by at least five productive tensions, between: commitment and contingency, partisanship and restraint, personal conviction and sensitivity to the audience, reasonableness and subjectivity, and decision and non-closure. Differences in how communities manage these tensions explain why there are multiple argument cultures and, hence, why we need to understand arguing both within and among different cultures. The paper elaborates these five productive tensions, offers some examples of argument cultures that negotiate them in various ways, and considers what it means to argue across cultures in a world that is both increasingly diverse and increasingly atomized

The Effect of Fuel Injection Equipment of Water-In-Diesel Emulsions on Micro-Explosion Behaviour

The number and size distributions of the water dispersed phase have a significant effect on both the long-term stability of an emulsion, and the probability of micro-explosions inside an engine. The emulsions are subjected to intense pressure and shear flow in the fuel injection equipment resulting in changes in the number and size distributions of the dispersed phase. These changes, in turn, have significant effects on the micro-explosion behavior of the droplets. To our knowledge, these effects are not known and have not been reported previously. To uncover some of these effects we carried out a comprehensive experimental investigation on an emulsion spray of 10% water (by volume) in diesel at different injection pressures of 500, 1000 and 1500 bar. A measurement system consisting of a high-speed camera was used to visualize the droplets’ micro-explosions and a thermocouple measured the temperature. Our measurements indicated that the emulsion shear in the injector nozzle shifted the emulsion droplet size distribution towards the smaller end resulting in a delay in the onset of micro-explosion. This delay in the onset of the micro-explosion is thought to be due to the decrease in the dispersed water coalescence rate which, in turn, increases the stability of the emulsion. The results also show that this delay in the onset of micro-explosion, and the temperature required for its onset, increased with injection pressure

Puffing and Microexplosion Behavior of Water in Pure Diesel Emulsion Droplets During Leidenfrost Effect

The microexplosion evolution phenomenon of single droplets of water in pure diesel emulsion under Leidenfrost effect has been studied. The tested emulsions were stabilized with a blend of commercial surfactants with three different water contents of 9%, 12%, and 15%. A high speed camera synchronized with backlight technique was used to capture the evolution of microexplosion and puffing. Three different droplet diameters of approximately 2.6 mm, 2 mm, and 0.2 mm were analyzed. It was found that the tendency of microexplosion and puffing frequency was influenced by the droplet diameter. Coalescence was the dominating factor in inducing microexplosion in bigger droplets. It was observed that the child droplets ejected from the parent droplet undergoes further puffing processes. The size of the secondary droplets after microexplosion were also found to be slightly influenced by the parent droplet size.The waiting time for microexplosion and puffing were compared for different droplets size

On the application of proper orthogonal decomposition (POD) for in-cylinder flow analysis

Proper orthogonal decomposition (POD) is a coherent structure identification technique based on either measured or computed data sets. Recently, POD has been adopted for the analysis of the in-cylinder flows inside internal combustion engines. In this study, stereoscopic particle image velocimetry (Stereo-PIV) measurements were carried out at the central vertical tumble plane inside an engine cylinder to acquire the velocity vector fields for the in-cylinder flow under different experimental conditions. Afterwards, the POD analysis were performed firstly on synthetic velocity vector fields with known characteristics in order to extract some fundamental properties of the POD technique. These data were used to reveal how the physical properties of coherent structures were captured and distributed among the POD modes, in addition to illustrate the difference between subtracting and non-subtracting the ensemble average prior to conducting POD on datasets. Moreover, two case studies for the in-cylinder flow at different valve lifts and different pressure differences across the air intake valves were presented and discussed as the effect of both valve lifts and pressure difference have not been investigated before using phase-invariant POD analysis. The results demonstrated that for repeatable flow pattern, only the first mode was sufficient to reconstruct the physical properties of the flow. Furthermore, POD analysis confirmed the negligible effect of pressure difference and subsequently the effect of engine speed on flow structures

Investigation of puffing and micro-explosion of water-in-diesel emulsion spray using shadow imaging

Water-in-diesel emulsions potentially favor the occurrence of micro-explosions when exposed to elevated temperatures, thereby improving the mixing of fuels with the ambient gas. The distributions and sizes of both spray and dispersed water droplets have a significant effect on puffing and micro-explosion behavior. Although the injection pressure is likely to alter the properties of emulsions, this effect on the spray flow puffing and micro-explosion has not been reported. To investigate this, we injected a fuel spray using a microsyringe needle into a high-temperature environment to investigate the droplets’ behavior. Injection pressures were varied at 10% v/v water content, the samples were imaged using a digital microscope, and the dispersed droplet size distributions were extracted using a purpose-built image processing algorithm. A high-speed camera coupled with a long-distance microscope objective was then used to capture the emulsion spray droplets. Our measurements indicated that the secondary atomization was significantly affected by the injection pressure which reduced the dispersed droplet size and hence caused a delay in puffing. At high injection pressure (500, 1000, and 1500 bar), the water was evaporated during the spray and although there was not enough droplet residence time, puffing and micro-explosion were clearly observed. This study suggests that high injection pressures have a detrimental effect on the secondary atomization of water-in-diesel emulsions