3,757 research outputs found
Paradigms and poverty in global energy policy: research needs for achieving universal energy access
This research letter discusses elements of a long-term interdisciplinary research effort needed to help
ensure the maximum social, economic, and environmental benefits of achieving secure universal access to modern energy services. Exclusion of these services affects the lives and livelihoods of billions of people. The research community has an important, but not yet well-defined, role to play
The African Lungfish (\u3cem\u3eProtopterus dolloi\u3c/em\u3e): Ionoregulation and Osmoregulation in a Fish out of Water
Although urea production and metabolism in lungish have been thoroughly studied, we have little knowledge of how internal osmotic and electrolyte balance are controlled during estivation or in water. We tested the hypothesis that, compared with the body surface of teleosts, the slender African lungfish (Protopterus dolloi) body surface was relatively impermeable to water, Na+ and Cl- due to its greatly reduced gills. Accordingly, we measured the tritiated water (3H-H2O) flux in P. dolloi in water and during air exposure. In water, 3H-H2O efflux was comparable with the lowest measurements reported in freshwater teleosts, with a rate constant (K) of 17.6% body water h-1. Unidirectional ion fluxes, measured using 22Na+ and 36Cl-, indicated that Na+ and Cl- influx was more than 90% lower than values reported in most freshwater teleosts. During air exposure, a cocoon formed within 1 wk that completely covered the dorsolateral body surface. However, there were no disturbances to blood osmotic or ion (Na+, Cl-) balance, despite seven- to eightfold increases in plasma urea after 20 wk. Up to 13-fold increases in muscle urea (on a dry-weight basis) were the likely explanation for the 56% increase in muscle water content observed after 20 wk of air exposure. The possibility that muscle acted as a “water reservoir” during air exposure was supported by the 20% decline in body mass observed during subsequent reimmersion in water. This decline in body mass was equivalent to 28 mL water in a 100-g animal and was very close to the calculated net water gain (approximately 32 mL) observed during the 20-wk period of air exposure. Tritiated water and unidirectional ion fluxes on air-exposed lungfish revealed that the majority of water and ion exchange was via the ventral body surface at rates that were initially similar to aquatic rates. The 3H-H2O flux declined over time but increased upon reimmersion. We conclude that the slender lungfish body surface, including the gills, has relatively low permeability to water and ions but that the ventral surface is an important site of osmoregulation and ionoregulation. We further propose that an amphibian-like combination of ventral skin water and ion permeability, plus internal urea accumulation during air exposure, allows P. dolloi to extract water from its surroundings and to store water in the muscle when the water supply becomes limited
Heralded quantum steering over a high-loss channel
Entanglement is the key resource for many long-range quantum information
tasks, including secure communication and fundamental tests of quantum physics.
These tasks require robust verification of shared entanglement, but performing
it over long distances is presently technologically intractable because the
loss through an optical fiber or free-space channel opens up a detection
loophole. We design and experimentally demonstrate a scheme that verifies
entanglement in the presence of at least dB of added loss,
equivalent to approximately km of telecommunication fiber. Our protocol
relies on entanglement swapping to herald the presence of a photon after the
lossy channel, enabling event-ready implementation of quantum steering. This
result overcomes the key barrier in device-independent communication under
realistic high-loss scenarios and in the realization of a quantum repeater.Comment: 8 pages, 5 figure
Addressing student models of energy loss in quantum tunnelling
We report on a multi-year, multi-institution study to investigate student
reasoning about energy in the context of quantum tunnelling. We use ungraded
surveys, graded examination questions, individual clinical interviews, and
multiple-choice exams to build a picture of the types of responses that
students typically give. We find that two descriptions of tunnelling through a
square barrier are particularly common. Students often state that tunnelling
particles lose energy while tunnelling. When sketching wave functions, students
also show a shift in the axis of oscillation, as if the height of the axis of
oscillation indicated the energy of the particle. We find inconsistencies
between students' conceptual, mathematical, and graphical models of quantum
tunnelling. As part of a curriculum in quantum physics, we have developed
instructional materials to help students develop a more robust and less
inconsistent picture of tunnelling, and present data suggesting that we have
succeeded in doing so.Comment: Originally submitted to the European Journal of Physics on 2005 Feb
10. Pages: 14. References: 11. Figures: 9. Tables: 1. Resubmitted May 18 with
revisions that include an appendix with the curriculum materials discussed in
the paper (4 page small group UW-style tutorial
Ultrasound assessment of lower limb muscle mass in response to resistance training in COPD
<p>Abstract</p> <p>Background</p> <p>Quantifying the improvements in lower limb or quadriceps muscle mass following resistance training (RT), is an important outcome measure in COPD. Ultrasound is a portable, radiation free imaging technique that can measure the size of superficial muscles belonging to the quadriceps group such as the rectus femoris, but has not been previously used in COPD patients following RT. We compared the responsiveness of ultrasound derived measures of quadriceps mass against dual energy x-ray absorptiometry (DEXA), in patients with COPD and healthy controls following a programme of high intensity knee extensor RT.</p> <p>Methods</p> <p>Portable ultrasound was used to assess the size of the dominant quadriceps in 45 COPD patients and 19 healthy controls-before, during, and after 8 weeks of bilateral high intensity isokinetic knee extensor RT. Scanning was performed at the mid-thigh region, and 2 indices of quadriceps mass were measured-rectus femoris cross-sectional area (RF<sub>csa</sub>) and quadriceps muscle thickness (Q<sub>t</sub>). Thigh lean mass (T<sub>dexa</sub>) was determined by DEXA.</p> <p>Results</p> <p>Training resulted in a significant increase in T<sub>dexa</sub>, RF<sub>csa</sub> and Q<sub>t</sub> in COPD patients [5.7%, 21.8%, 12.1% respectively] and healthy controls [5.4%, 19.5%, 10.9 respectively]. The effect size for the changes in RF<sub>csa</sub> (COPD= 0.77; Healthy=0.83) and Q<sub>t</sub> (COPD=0.36; Healthy=0.78) were greater than the changes in T<sub>dexa</sub> (COPD=0.19; Healthy=0.26) following RT.</p> <p>Conclusions</p> <p>Serial ultrasound measurements of the quadriceps can detect changes in muscle mass in response to RT in COPD. The technique has good reproducibility, and may be more sensitive to changes in muscle mass when compared to DEXA.</p> <p>Trial registration</p> <p><url>http://www.controlled-trials.com</url> (Identifier: ISRCTN22764439)</p
Recommended from our members
PERMEABILITY, SOLUBILITY AND DIFFUSIVITY OF HYDROGEN ISOTOPES IN STAINLESS STEELS AT HIGH GAS PRESSURES
The Defense Waste Processing Facility (DWPF) is about to process High Level Waste (HLW) Sludge Batch 4 (SB4). This sludge batch is high in alumina and nepheline can crystallize readily depending on the glass composition. Large concentrations of crystallized nepheline can have an adverse effect on HLW glass durability. Several studies have been performed to study the potential for nepheline formation in SB4. The Phase 3 Nepheline Formation study of SB4 glasses examined sixteen different glasses made with four different frits. Melt rate experiments were performed by the Process Science and Engineering Section (PS&E) of the Savannah River National Laboratory (SRNL) using the four frits from the Phase 3 work, plus additional high B2O3/high Fe2O3 frits. Preliminary results from these tests showed the potential for significant improvements in melt rate for SB4 glasses using a higher B2O3-containing frit, particularly Frit 503. The main objective of this study was to investigate the durability of SB4 glasses produced with a high B2O3 frit likely to be recommended for SB4 processing. In addition, a range of waste loadings (WLs) was selected to continue to assess the effectiveness of a nepheline discriminator in predicting concentrations of nepheline crystallization that would be sufficient to influence the durability response of the glass. Five glasses were selected for this study, covering a WL range of 30 to 50 wt% in 5 wt% increments. The Frit 503 glasses were batched and melted. Specimens of each glass were heat-treated to simulate cooling along the centerline of a DWPF-type canister (ccc) to gauge the effects of thermal history on product performance. Visual observations on both quenched and ccc glasses were documented. A representative sample from each glass was submitted to the SRNL Process Science Analytical Laboratory (PSAL) for chemical analysis to confirm that the as-fabricated glasses corresponded to the defined target compositions. The Product Consistency Test (PCT, ASTM C1285) was performed in triplicate on each Frit 503 quenched and ccc glass to assess chemical durability. The experimental test matrix also included the Environmental Assessment (EA) glass and the Approved Reference Material (ARM-1) glass. Representative samples of all the ccc glasses were examined for homogeneity visually and by X-ray diffraction (XRD) analysis. Chemical composition measurements indicated that the experimental glasses were close to their target compositions. PCT results showed that all of the Fit 503 quenched glasses had an acceptable durability compared to the EA benchmark glass. The durability of one of the ccc glasses, NEPHB-04, was statistically greater than its quenched counterpart. However, this was shown to be of little practical significance, as the durability of the NEPHB-04 ccc glass was acceptable when compared to the durability of the EA benchmark glass. Visual observations and PCT results indicated that all of the Frit 503 quenched glasses were free of any crystallization that impacts durability. For the ccc glasses, XRD results indicated that the lower WL glasses (30 to 40 wt%) were amorphous, which was consistent with visual observations and PCT responses. The higher WL glasses (45 and 50 wt%) were shown by XRD to contain spinel (trevorite, NiFe2O4). It is possible that some of the other high WL glasses also contained some nepheline, but that the amount of nepheline crystallization was below the detection limit (0.5 vol%) associated with XRD. The results indicate that Frit 503 is a good candidate for SB4 processing, based on chemical durability of homogeneous and devitrified glasses over a WL range of 30 - 50%. It should be noted that the higher WL glasses would not be fit for processing in DWPF as they exceed other process related criteria (such as liquidus temperature). However, this is only one of many factors influencing the frit selection. Melt rate and the final SB4 composition are also important factors in frit selection. Additional melt rate studies are currently underway, and the final composition projection for SB4 is expected shortly
Recommended from our members
MICROSTRUCTURAL FEATURES AFFECTING PROPERTIES AND AGING OF TRITIUM-EXPOSED AUSTENTIC STAINLESS STEEL
A project to implement a life-cycle engineering approach to tritium reservoirs has been initiated through the DOE - Technology Investment Projects. The first task in the project was to develop a comprehensive list of microstructural features that impact the aging performance of the tritium reservoirs. Each of the participating sites (SRNL, SNL, LANL, KCP) independently developed a list of features deemed integral to tritium reservoir performance based upon operational and design experience. An integrated list of features was ultimately developed by the project team that could be included in the modeling process. The features of interest were chosen based upon their impact on the following key factors in controlling crack growth: (1) the H/He solubility or diffusivity within the materials, (2) the stress/strain state at the crack tip, (3) material threshold for crack extension, and (4) microstructure based fracture distance, commonly estimated by grain size for intergranular fracture. Wherever possible, key references were identified to substantiate the effects on the tritium embrittlement phenomenon of the various microstructural features. Each of these features was chosen based upon their impact to the cracking phenomenon of interest. The features chosen were typically associated with orientation, morphology, and distribution of phases and inclusions, grain and grain boundary characteristics, and initial mechanical properties. Phase and inclusion content and distribution were determined to play a key role in the cracking phenomenon. The presence of {delta}-ferrite in the weld and strain-induced martensite in the primarily austenitic matrix are known to facilitate hydrogen diffusion and the interfaces have been observed as a hydrogen assisted fracture path. The morphology, size, and distribution of inclusions and precipitates, particularly on the grain boundaries, influence cracking since they trap hydrogen and facilitate intergranular fracture. Compositional banding and nitrogen concentration were also included as features of interest. The microstructural features of interest included (1) grain size, shape, and orientation; (2) dislocation structure and distribution, or recovered vs. un-recovered. The grain size and orientation affect the grain boundary fracture stress and the hydrogen solubility and diffusion paths. The dislocation structure and distribution play a role in hydrogen trapping as well as potentially affecting the hydrogen assisted fracture path. The initial mechanical and physical properties that are to be included in the investigation are yield stress, fracture toughness, work-hardening capacity, threshold hydrogen cracking stress intensity and stacking-fault energy
Constraints on Near-Ridge Magmatism Using \u3csup\u3e40\u3c/sup\u3eAr/\u3csup\u3e39\u3c/sup\u3eAr Geochronology of Enriched MORB from the 8°20\u27 N Seamount Chain
Our understanding of the spatial-temporal-compositional relationships between off-axis magmatism and mid-ocean ridge spreading centers is limited. Determining the 40Ar/39Ar ages of mid-ocean ridge basalt (MORB) lavas erupting near mid-ocean ridges (MOR) has been a challenge due to the characteristically low K2O contents in incompatible element-depleted normal MORB (NMORB). High-precision 40Ar/39Ar geochronology is used here to determine ages of young, basaltic lavas erupted along the 8°20\u27 N seamount chain west of the East Pacific Rise (EPR) axis that have a range of incompatible element enrichments (EMORB) suitable for 40Ar/39Ar geochronology (e.g., K2O contents \u3e 0.3 wt%). 40Ar/39Ar ages were determined in 29 well-characterized basalts sampled using HOV Alvin and dredging. Detailed geochronology and geochemical analyses provide important constraints on the timing, distribution, and origins of lavas that constructed this extensive volcanic lineament relative to magmatism beneath the adjacent EPR axis. Seamount eruption ages are up to ∼1.6 Ma younger than the underlying lithosphere, supporting a model of prolonged off-axis magmatism for at least 2 Myrs at distances as great as ∼90 km from the ridge axis. Increasing geochemical heterogeneity with eruption distance reflects the diminishing effect of sub-ridge melt focusing. The range of geochemically distinct lavas erupted at given distances from the ridge highlights the dynamic nature of the near-ridge magmatic environment over Myr timescales. Linear ridge-like (EPR-parallel) morphotectonic features erupt the youngest and most incompatible element-enriched lavas of the entire seamount chain, indicating there is a recent change in the influence of mantle heterogeneity and off-axis melt metasomatism on the near-ridge lithospheric mantle. Changes in seamount morphologies are attributed to counter-clockwise rotation and southward migration of the nearby Siqueiros transform over the last few million years
Predicting lymphatic filariasis transmission and elimination dynamics using a multi-model ensemble framework
Mathematical models of parasite transmission provide powerful tools for assessing the impacts of interventions. Owing to complexity and uncertainty, no single model may capture all features of transmission and elimination dynamics. Multi-model ensemble modelling offers a framework to help overcome biases of single models. We report on the development of a first multi-model ensemble of three lymphatic filariasis (LF) models (EPIFIL, LYMFASIM, and TRANSFIL), and evaluate its predictive performance in comparison with that of the constituents using calibration and validation data from three case study sites, one each from the three major LF endemic regions: Africa, Southeast Asia and Papua New Guinea (PNG). We assessed the performance of the respective models for predicting the outcomes of annual MDA strategies for various baseline scenarios thought to exemplify the current endemic conditions in the three regions. The results show that the constructed multi-model ensemble outperformed the single models when evaluated across all sites. Single models that best fitted calibration data tended to do less well in simulating the out-of-sample, or validation, intervention data. Scenario modelling results demonstrate that the multi-model ensemble is able to compensate for variance between single models in order to produce more plausible predictions of intervention impacts. Our results highlight the value of an ensemble approach to modelling parasite control dynamics. However, its optimal use will require further methodological improvements as well as consideration of the organizational mechanisms required to ensure that modelling results and data are shared effectively between all stakeholders
- …