Sensibilidad de la microestructura en un sistema multi-escala

Este trabajo analiza la sensibilidad de los parámetros de optimización de una microestructura periódica isotrópica en la optimización topológica de una viga MBB. La función objetivo para optimización de la microestructura es el módulo volumétrico, y los parámetros analizados son: fracción volumétrica, radio de filtro y factor de penalización. En la macroestructura la función objetivo es la minimización de la flexibilidad, sujeta a un volumen predefinido de 0.5. Se desarrolló un algoritmo, con base en el método SIMP, capaz de transferir las informaciones de la microestructura para la macroestructura. Se realizaron análisis numéricos, variando los parámetros y observando el comportamiento de las soluciones. Los resultados demuestran que la fracción volumétrica de la microestructura tiene gran influencia en la maximización de la rigidez, sin embargo el radio de filtro y el factor de penalización presentaron poca influencia, así como sobre el perfil de la macroestructura.Publicado en: Mecánica Computacional vol. XXXV, no. 23Facultad de Ingenierí

Sensibilidad de la microestructura en un sistema multi-escala

Este trabajo analiza la sensibilidad de los parámetros de optimización de una microestructura periódica isotrópica en la optimización topológica de una viga MBB. La función objetivo para optimización de la microestructura es el módulo volumétrico, y los parámetros analizados son: fracción volumétrica, radio de filtro y factor de penalización. En la macroestructura la función objetivo es la minimización de la flexibilidad, sujeta a un volumen predefinido de 0.5. Se desarrolló un algoritmo, con base en el método SIMP, capaz de transferir las informaciones de la microestructura para la macroestructura. Se realizaron análisis numéricos, variando los parámetros y observando el comportamiento de las soluciones. Los resultados demuestran que la fracción volumétrica de la microestructura tiene gran influencia en la maximización de la rigidez, sin embargo el radio de filtro y el factor de penalización presentaron poca influencia, así como sobre el perfil de la macroestructura.Publicado en: Mecánica Computacional vol. XXXV, no. 23Facultad de Ingenierí

Sensibilidad de la microestructura en un sistema multi-escala

Este trabajo analiza la sensibilidad de los parámetros de optimización de una microestructura periódica isotrópica en la optimización topológica de una viga MBB. La función objetivo para optimización de la microestructura es el módulo volumétrico, y los parámetros analizados son: fracción volumétrica, radio de filtro y factor de penalización. En la macroestructura la función objetivo es la minimización de la flexibilidad, sujeta a un volumen predefinido de 0.5. Se desarrolló un algoritmo, con base en el método SIMP, capaz de transferir las informaciones de la microestructura para la macroestructura. Se realizaron análisis numéricos, variando los parámetros y observando el comportamiento de las soluciones. Los resultados demuestran que la fracción volumétrica de la microestructura tiene gran influencia en la maximización de la rigidez, sin embargo el radio de filtro y el factor de penalización presentaron poca influencia, así como sobre el perfil de la macroestructura.Publicado en: Mecánica Computacional vol. XXXV, no. 23Facultad de Ingenierí

Insights into milk-clotting activity of latex peptidases from <i>Calotropis procera</i> and <i>Cryptostegia grandiflora</i>

Latex fractions from Calotropis procera, Cryptostegia grandiflora, Plumeria rubra, and Himatanthus drasticus were assayed in order to prospect for new plant peptidases with milk-clotting activities, for use as rennet alternatives. Only C. procera and C. grandiflora latex fractions exhibited proteolytic and milk-clotting activities, which were not affected by high concentrations of NaCl and CaCl2. However, pre-incubation of both samples at 75 °C for 10 min eliminated completely their activities. Both proteolytic fractions were able to hydrolyze k-casein and to produce peptides of 16 kDa, a similar SDS-PAGE profile to commercial chymosin. RP-HPLC and mass spectrometry analyses of the k-casein peptides showed that the peptidases from C. procera or C. grandiflora hydrolyzed k-casein similar to commercial chymosin. The cheeses made with both latex peptidases exhibited yields, dry masses, and soluble proteins similar to cheeses prepared with commercial chymosin. In conclusion, C. procera and C. grandiflora latex peptidases with the ability to coagulate milk can be used as alternatives to commercial animal chymosin in the cheese manufacturing process.Centro de Investigación de Proteínas Vegetale

Insights into milk-clotting activity of latex peptidases from <i>Calotropis procera</i> and <i>Cryptostegia grandiflora</i>

Latex fractions from Calotropis procera, Cryptostegia grandiflora, Plumeria rubra, and Himatanthus drasticus were assayed in order to prospect for new plant peptidases with milk-clotting activities, for use as rennet alternatives. Only C. procera and C. grandiflora latex fractions exhibited proteolytic and milk-clotting activities, which were not affected by high concentrations of NaCl and CaCl2. However, pre-incubation of both samples at 75 °C for 10 min eliminated completely their activities. Both proteolytic fractions were able to hydrolyze k-casein and to produce peptides of 16 kDa, a similar SDS-PAGE profile to commercial chymosin. RP-HPLC and mass spectrometry analyses of the k-casein peptides showed that the peptidases from C. procera or C. grandiflora hydrolyzed k-casein similar to commercial chymosin. The cheeses made with both latex peptidases exhibited yields, dry masses, and soluble proteins similar to cheeses prepared with commercial chymosin. In conclusion, C. procera and C. grandiflora latex peptidases with the ability to coagulate milk can be used as alternatives to commercial animal chymosin in the cheese manufacturing process.Centro de Investigación de Proteínas Vegetale

Insights into milk-clotting activity of latex peptidases from <i>Calotropis procera</i> and <i>Cryptostegia grandiflora</i>

Latex fractions from Calotropis procera, Cryptostegia grandiflora, Plumeria rubra, and Himatanthus drasticus were assayed in order to prospect for new plant peptidases with milk-clotting activities, for use as rennet alternatives. Only C. procera and C. grandiflora latex fractions exhibited proteolytic and milk-clotting activities, which were not affected by high concentrations of NaCl and CaCl2. However, pre-incubation of both samples at 75 °C for 10 min eliminated completely their activities. Both proteolytic fractions were able to hydrolyze k-casein and to produce peptides of 16 kDa, a similar SDS-PAGE profile to commercial chymosin. RP-HPLC and mass spectrometry analyses of the k-casein peptides showed that the peptidases from C. procera or C. grandiflora hydrolyzed k-casein similar to commercial chymosin. The cheeses made with both latex peptidases exhibited yields, dry masses, and soluble proteins similar to cheeses prepared with commercial chymosin. In conclusion, C. procera and C. grandiflora latex peptidases with the ability to coagulate milk can be used as alternatives to commercial animal chymosin in the cheese manufacturing process.Centro de Investigación de Proteínas Vegetale

Pool boiling of nanofluids on biphilic surfaces: An experimental and numerical study

This study addresses the combination of customized surface modification with the use of nanofluids, to infer on its potential to enhance pool-boiling heat transfer. Hydrophilic surfaces patterned with superhydrophobic regions were developed and used as surface interfaces with different nanofluids (water with gold, silver, aluminum and alumina nanoparticles), in order to evaluate the effect of the nature and concentration of the nanoparticles in bubble dynamics and consequently in heat transfer processes. The main qualitative and quantitative analysis was based on extensive post-processing of synchronized high-speed and thermographic images. To study the nucleation of a single bubble in pool boiling condition, a numerical model was also implemented. The results show an evident benefit of using biphilic patterns with well-established distances between the superhydrophobic regions. This can be observed in the resulting plot of the dissipated heat flux for a biphilic pattern with seven superhydrophobic spots, δ = 1/d and an imposed heat flux of 2132 w/m2. In this case, the dissipated heat flux is almost constant (except in the instant t* ≈ 0.9 when it reaches a peak of 2400 W/m2), whilst when using only a single superhydrophobic spot, where the heat flux dissipation reaches the maximum shortly after the detachment of the bubble, dropping continuously until a new necking phase starts. The biphilic patterns also allow a controlled bubble coalescence, which promotes fluid convection at the hydrophilic spacing between the superhydrophobic regions, which clearly contributes to cool down the surface. This effect is noticeable in the case of employing the Ag 1 wt% nanofluid, with an imposed heat flux of 2132 W/m2, where the coalescence of the drops promotes a surface cooling, identified by a temperature drop of 0.7 °C in the hydrophilic areas. Those areas have an average temperature of 101.8 °C, whilst the average temperature of the superhydrophobic spots at coalescence time is of 102.9 °C. For low concentrations as the ones used in this work, the effect of the nanofluids was observed to play a minor role. This can be observed on the slight discrepancy of the heat dissipation decay that occurred in the necking stage of the bubbles for nanofluids with the same kind of nanoparticles and different concentration. For the Au 0.1 wt% nanofluid, a heat dissipation decay of 350 W/m2 was reported, whilst for the Au 0.5 wt% nanofluid, the same decay was only of 280 W/m2. The results of the numerical model concerning velocity fields indicated a sudden acceleration at the bubble detachment, as can be qualitatively analyzed in the thermographic images obtained in this work. Additionally, the temperature fields of the analyzed region present the same tendency as the experimental results.This work was funded by Portuguese national funds of FCT/MCTES (PIDDAC) through the base funding from the following research units: UIDB/00532/2020 (Transport Phenomena Research Center, CEFT), UIDB/04077/2020 (MEtRICs) and UIDP/04436/2020. The authors are also grateful for the funding of FCT through the projects LISBOA-01-0145-FEDER-030171/NORTE-01-0145-FEDER-030171 (PTDC/EME-SIS/30171/2017), funded by COMPETE2020, NORTE2020, PORTUGAL2020 and FEDER. The authors also acknowledge FCT for partially financing the research under the framework of the project UTAP-EXPL/CTE/0064/2017, financiado no ambito do Projeto 5665-Parcerias Internacionais de Ciencia e Tecnologia, UT Austin Programme. Mr Pedro Pontes also acknowledgesFCT for his fellowship ref. SFRH/BD/149286/2019

Authorship trends in software engineering

This paper aims to examine authorship trends in software engineering, especially those related to the number of authors, of scientific publications. We collected and mined around 70.000 entries from DBLP for 122 conferences and journals, for the period 1971–2012, in order to process several bibliometric indicators. We provide evidence that the number of authors of articles in software engineering is increasing on average around +0.40 authors/decade. The results also indicate that until 1980, the majority of the articles have a sole author, while nowadays articles with 3 or 4 authors represent almost half of the total.Fundação para a Ciência e a Tecnologia (FCT

The Enhanced Efficacy of Intracellular Delivery of Doxorubicin/C6-Ceramide Combination Mediated by the F3 Peptide/Nucleolin System Is Supported by the Downregulation of the PI3K/Akt Pathway

Targeting multiple cellular populations is of high therapeutic relevance for the tackling of solid tumors heterogeneity. Herein, the ability of pegylated and pH-sensitive liposomes, functionalized with the nucleolin-binding F3 peptide and containing doxorubicin (DXR)/C6-ceramide synergistic combination, to target, in vitro, ovarian cancer, including ovarian cancer stem cells (CSC), was assessed. The underlying molecular mechanism of action of the nucleolin-mediated intracellular delivery of C6-ceramide to cancer cells was also explored. The assessment of overexpression of surface nucleolin expression by flow cytometry was critical to dissipate differences identified by Western blot in membrane/cytoplasm of SKOV-3, OVCAR-3 and TOV-112D ovarian cancer cell lines. The former was in line with the significant extent of uptake into (bulk) ovarian cancer cells, relative to non-targeted and non-specific counterparts. This pattern of uptake was recapitulated with putative CSC-enriched ovarian SKOV-3 and OVCAR-3 sub-population (EpCAMhigh/CD44high). Co-encapsulation of DXR:C6-ceramide into F3 peptide-targeted liposomes improved cytotoxic activity relative to liposomes containing DXR alone, in an extent that depended on the intrinsic resistance to DXR and on the incubation time. The enhanced cytotoxicity of the targeted combination was mechanistically supported by the downregulation of PI3K/Akt pathway by C6-ceramide, only among the nucleolin-overexpressing cancer cells presenting a basal p-Akt/total Akt ratio lower than 1