1,011 research outputs found

    Atomistically-informed continuum modeling and isogeometric analysis of 2D materials over holey substrates

    Get PDF
    This work develops, discretizes, and validates a continuum model of a molybdenum disulfide (MoS2_2) monolayer interacting with a periodic holey silicon nitride substrate via van der Waals (vdW) forces. The MoS2_2 layer is modeled as a geometrically nonlinear Kirchhoff-Love shell, and vdW forces are modeled by a Lennard-Jones potential, simplified using approximations for a smooth substrate topography. The material parameters of the shell model are calibrated by comparing small-strain tensile and bending tests with atomistic simulations. This model is efficiently discretized using isogeometric analysis (IGA) for the shell structure and a pseudo-time continuation method for energy minimization. The IGA shell model is validated against fully-atomistic calculations for several benchmark problems with different substrate geometries. The continuum simulations reproduce deflections, strains and curvatures predicted by atomistic simulations, which are known to strongly affect the electronic properties of MoS2_2, with deviations well below the modeling errors suggested by differences between the widely-used reactive empirical bond order and Stillinger-Weber interatomic potentials. Agreement with atomistic results depends on geometric nonlinearity in some cases, but a simple isotropic St. Venant-Kirchhoff model is found to be sufficient to represent material behavior. We find that the IGA discretization of the continuum model has a much lower computational cost than atomistic simulations, and expect that it will enable efficient design space exploration in strain engineering applications. This is demonstrated by studying the dependence of strain and curvature in MoS2_2 over a holey substrate as a function of the hole spacing on scales inaccessible to atomistic calculations. The results show an unexpected qualitative change in the deformation pattern below a critical hole separation

    Mild Hypothermia Attenuates Intercellular Adhesion Molecule-1 Induction via Activation of Extracellular Signal-Regulated Kinase-1/2 in a Focal Cerebral Ischemia Model

    Get PDF
    Intercellular adhesion molecule-1 (ICAM-1) in cerebral vascular endothelium induced by ischemic insult triggers leukocyte infiltration and inflammatory reaction. We investigated the mechanism of hypothermic suppression of ICAM-1 in a model of focal cerebral ischemia. Rats underwent 2 hours of middle cerebral artery occlusion and were kept at 37°C or 33°C during occlusion and rewarmed to normal temperature immediately after reperfusion. Under hypothermic condition, robust activation of extracellular signal-regulated kinase-1/2 (ERK1/2) was observed in vascular endothelium of ischemic brain. Hypothermic suppression of ICAM-1 was reversed by ERK1/2 inhibition. Phosphorylation of signal transducer and activator of transcription 3 (STAT3) in ischemic vessel was attenuated by hypothermia. STAT3 inhibitor suppressed ICAM-1 production induced by stroke. ERK1/2 inhibition enhanced phosphorylation and DNA binding activity of STAT3 in hypothermic condition. In this study, we demonstrated that hypothermic suppression of ICAM-1 induction is mediated by enhanced ERK1/2 activation and subsequent attenuation of STAT3 action

    Overexpression of the miR-141/200c cluster promotes the migratory and invasive ability of triple-negative breast cancer cells through the activation of the FAK and PI3K/AKT signaling pathways by secreting VEGF-A

    Get PDF
    Migration in miR-141/200c-transduced HCC-38 and Hs578T cells treated with an anti-VEGF-A-neutralizing antibody. (A, D) Migration in miR-141/200c-transduced HCC-38 and Hs578T cells. Images of the crystal violet-stained cells that migrated horizontally in the trans-well migration assay (upper). The absorbance values of extracted crystal violet in migrated cells (lower). The migratory abilities of the miR-200c cells (~1.6-fold and ~1.7-fold, HCC-38 and Hs578T, respectively) were significantly increased compared with those of the control cells. (B, E) Measurement of the secreted levels of cytokines and growth factors (IL-2, IL-4, IL-5, IL-10, IL-12, IL-13, GM-CSF, IFN-γ, TNF-α, and VEGF-A). Transduction of miR-141/200c into HCC-38 and Hs578T cells promoted significantly higher VEGF-A secretion than that of control cells. (C, F) Trans-well migration of anti-VEGF-A-neutralizing antibody-treated cells. The enhanced migration of the miR-141/200c-transduced HCC-38 cells were significantly suppressed by treatment with anti-VEGF-A-neutralizing antibodies, but miR-141/200c-transduced Hs578T cells still showed increased migratory ability compared with control cells. *p < 0.05, **p < 0.001. (JPG 188 kb

    Early Bile Duct Cancer Detected by Direct Peroral Cholangioscopy with Narrow-Band Imaging after Bile Duct Stone Removal

    Get PDF
    Cholangioscopy not only enables the direct visualization of the biliary tree, but also allows for forceps biopsy to diagnosis early cholangiocarcinoma. Recently, some reports have suggested the clinical usefulness of direct peroral cholangioscopy (POC) using an ultra-slim endoscope with a standard endoscopic unit by a single operator. Enhanced endoscopy, such as narrow band imaging (NBI), can be helpful for detecting early neoplasia in the gastrointestinal tract and is easily applicable during direct POC. A 63-year-old woman with acute cholangitis had persistent bile duct dilation on the left hepatic duct after common bile duct stone removal and clinical improvement. We performed direct POC with NBI using an ultra-slim upper endoscope to examine the strictured segment. NBI examination showed an irregular surface and polypoid structure with tumor vessels. Target biopsy under direct endoscopic visualization was performed, and adenocarcinoma was documented. The patient underwent an extended left hepatectomy, and the resected specimen showed early bile duct cancer confined to the ductal mucosa

    Atomistically-informed continuum modeling and isogeometric analysis of 2D materials over holey substrates

    Get PDF
    This work develops, discretizes, and validates a continuum model of a molybdenum disulfide (MoS2) monolayer interacting with a periodic holey silicon nitride (Si3N4) substrate via van der Waals (vdW) forces. The MoS2 layer is modeled as a geometrically nonlinear Kirchhoff–Love shell, and vdW forces are modeled by a Lennard-Jones (LJ) potential, simplified using approximations for a smooth substrate topography. Both the shell model and LJ interactions include novel extensions informed by close comparison with fully-atomistic calculations. The material parameters of the shell model are calibrated by comparing small-strain tensile and bending tests with atomistic simulations. This model is efficiently discretized using isogeometric analysis (IGA) for the shell structure and a pseudo-time continuation method for energy minimization. The IGA shell model is validated against fully-atomistic calculations for several benchmark problems with different substrate geometries. Agreement with atomistic results depends on geometric nonlinearity in some cases, but a simple isotropic St.Venant–Kirchhoff model is found to be sufficient to represent material behavior. We find that the IGA discretization of the continuum model has a much lower computational cost than atomistic simulations, and expect that it will enable efficient design space exploration in strain engineering applications. This is demonstrated by studying the dependence of strain and curvature in MoS2 over a holey substrate as a function of the hole spacing on scales inaccessible to atomistic calculations. The results show an unexpected qualitative change in the deformation pattern below a critical hole separation

    Lamellar keratoplasty using position-guided surgical needle and M-mode optical coherence tomography

    Get PDF
    Deep anterior lamellar keratoplasty (DALK) is an emerging surgical technique for the restoration of corneal clarity and vision acuity. The big-bubble technique in DALK surgery is the most essential procedure that includes the air injection through a thin syringe needle to separate the dysfunctional region of the cornea. Even though DALK is a well-known transplant method, it is still challenged to manipulate the needle inside the cornea under the surgical microscope, which varies its surgical yield. Here, we introduce the DALK protocol based on the position-guided needle and M-mode optical coherence tomography (OCT). Depth-resolved 26-gage needle was specially designed, fabricated by the stepwise transitional core fiber, and integrated with the swept source OCT system. Since our device is feasible to provide both the position information inside the cornea as well as air injection, it enables the accurate management of bubble formation during DALK. Our results show that real-time feedback of needle end position was intuitionally visualized and fast enough to adjust the location of the needle. Through our research, we realized that position-guided needle combined with M-mode OCT is a very efficient and promising surgical tool, which also to enhance the accuracy and stability of DALK
    corecore