Characterization of the Intra-Unit-Cell magnetic order in Bi2Sr2CaCu2O8+d

As in YBa2Cu3O6+x and HgBa2CuO8+d, the pseudo-gap state in Bi2Sr2CaCu2O8+d is characterized by the existence of an intra-unit-cell magnetic order revealed by polarized neutron scattering technique. We report here a supplementary set of polarized neutron scattering measurements for which the direction of the magnetic moment is determined and the magnetic intensity is calibrated in absolute units. The new data allow a close comparison between bilayer systems YBa2Cu3O6+x and Bi2Sr2CaCu2O8+d and rise important questions concerning the range of the magnetic correlations and the role of disorder around optimal doping.Comment: 12 pages, 8 figures, submitted to physical review

The NILE Project — Advances in the Conversion of Lignocellulosic Materials into Ethanol

NILE ("New Improvements for Lignocellulosic Ethanol") was an integrated European project (2005-2010) devoted to the conversion of lignocellulosic raw materials to ethanol. The main objectives were to design novel enzymes suitable for the hydrolysis of cellulose to glucose and new yeast strains able to efficiently converting all the sugars present in lignocellulose into ethanol. The project also included testing these new developments in an integrated pilot plant and evaluating the environmental and socio-economic impacts of implementing lignocellulosic ethanol on a large scale. Two model raw materials – spruce and wheat straw – both preconditioned with similar pretreatments, were used. Several approaches were explored to improve the saccharification of these pretreated raw materials such as searching for new efficient enzymes and enzyme engineering. Various genetic engineering methods were applied to obtain stable xylose- and arabinose-fermenting Saccharomyces cerevisiae strains that tolerate the toxic compounds present in lignocellulosic hydrolysates. The pilot plant was able to treat 2 tons of dry matter per day, and hydrolysis and fermentation could be run successively or simultaneously. A global model integrating the supply chain was used to assess the performance of lignocellulosic ethanol from an economical and environmental perspective. It was found that directed evolution of a specific enzyme of the cellulolytic cocktail produced by the industrial fungus, Trichoderma reesei, and modification of the composition of this cocktail led to improvements of the enzymatic hydrolysis of pretreated raw material. These results, however, were difficult to reproduce at a large scale. A substantial increase in the ethanol conversion yield and in specific ethanol productivity was obtained through a combination of metabolic engineering of yeast strains and fermentation process development. Pilot trials confirmed the good behaviour of the yeast strains in industrial conditions as well as the suitability of lignin residues as fuels. The ethanol cost and the greenhouse gas emissions were highly dependent on the supply chain but the best performing supply chains showed environmental and economic benefits. From a global standpoint, the results showed the necessity for an optimal integration of the process to co-develop all the steps of the process and to test the improvements in a flexible pilot plant, thus allowing the comparison of various configurations and their economic and environmental impacts to be determined. <br> Le projet NILE, acronyme de "New Improvements for Lignocellulosic Ethanol", était un projet européen (2005-2010) consacré à la conversion des matières premières lignocellulosiques en éthanol. Ses principaux objectifs étaient de concevoir de nouvelles enzymes adaptées à l’hydrolyse de la cellulose en glucose et de nouvelles souches de levure capables de convertir efficacement tous les sucres présents dans la lignocellulose en éthanol. Une autre partie du projet consistait à tester ces nouveaux systèmes dans une installation pilote et à évaluer les impacts environnementaux et socio-économiques de la production et utilisation à grande échelle d’éthanol lignocellulosique. Deux matières premières modèles (l’épicéa et la paille de blé) prétraitées de façon semblable, ont été étudiées. Différentes approches ont été tentées pour améliorer la saccharification de ces matières premières, par exemple, la recherche de nouvelles enzymes efficaces ou l’ingénierie d’enzymes. Plusieurs stratégies d’ingénierie génétique ont été utilisées pour obtenir des souches stables de Saccharomyces cerevisiae capables de fermenter le xylose et l’arabinose, et de tolérer les composés toxiques présents dans les hydrolysats lignocellulosiques. L’installation pilote pouvait traiter 2 tonnes de matières sèches par jour, et l’hydrolyse et la fermentation pouvaient être menées successivement ou simultanément. Un modèle global intégrant la chaîne d’approvisionnement en matière première a servi à évaluer les performances économiques et environnementales de la production d’éthanol lignocellulosique. L’évolution dirigée d’une enzyme du cocktail cellulolytique produit par le champignon Trichoderma reesei, et la modification de la composition de ce cocktail améliorent l’hydrolyse enzymatique des matières premières prétraitées. Cependant, ces résultats n’ont pu être reproduits à grande échelle. Le rendement de conversion et la productivité spécifique en éthanol ont été sensiblement augmentés grâce à l’ingénierie métabolique des souches de levure et au développement d’un procédé optimal de fermentation. Les essais en pilote ont confirmé le bon comportement de ces souches de levure en conditions industrielles ainsi que la possibilité d’utiliser les résidus riches en lignine comme combustible. Le coût de production de l’éthanol et le bilan des émissions de gaz à effet de serre étaient très dépendants des sources d’énergie utilisées. D’un point de vue plus global, les résultats ont montré que l’optimisation du procédé nécessite de codévelopper toutes les étapes de façon intégrée et de valider les améliorations dans une installation pilote, afin notamment de pouvoir comparer différentes configurations et d’en déterminer les effets sur l’économie du procédé et ses impacts environnementaux

Phase Properties of Laser High-Order Harmonics Generated on Plasma Mirrors

International audienceAs a high-intensity laser-pulse reflects on a plasma mirror, high-order harmonics of the incident frequency can be generated in the reflected beam. We present a numerical study of the phase properties of these individual harmonics, and demonstrate experimentally that they can be coherently controlled through the phase of the driving laser field. The harmonic intrinsic phase, resulting from the generation process, is directly related to the coherent sub-laser-cycle dynamics of plasma electrons, and thus constitutes a new experimental probe of these dynamics

Coherent Wake Emission of High-Order Harmonics from Overdense Plasmas

International audienc

Report of the ICES\NAFO Joint Working Group on Deep-water Ecology (WGDEC), 11–15 March 2013, Floedevigen, Norway.

On 11 February 2013, the joint ICES/NAFO WGDEC, chaired by Francis Neat (UK) and attended by ten members met at the Institute for Marine Research in Floedevi-gen, Norway to consider the terms of reference (ToR) listed in Section 2. WGDEC was requested to update all records of deep-water vulnerable marine eco-systems (VMEs) in the North Atlantic. New data from a range of sources including multibeam echosounder surveys, fisheries surveys, habitat modelling and seabed imagery surveys was provided. For several areas across the North Atlantic, WGDEC makes recommendations for areas to be closed to bottom fisheries for the purposes of conservation of VMEs

High-contrast 10-fs OPCPA-based Front-End for the Apollon-10PW laser (Orale)

International audienceWe present a high-contrast 10-fs Front-End for Ti:sapphire PW-lasers within the Apollon-10PW project. This injector uses OPCPA pumped at 100 Hz by Yb-based CPA chain. Combination of OPCPA and XPW permits a >10 12 contrast ratio

Internal frequency conversion extreme ultraviolet interferometer using mutual coherence properties of two high-order-harmonic sources

International audienceWe report on an innovative two-dimensional imaging extreme ultraviolet (XUV) interferometer operating at 32 nm based on the mutual coherence of two laser high order harmonics (HOH) sources, separately generated in gas. We give the first evidence that the two mutually coherent HOH sources can be produced in two independent spatially separated gas jets, allowing for probing centimeter-sized objects. A magnification factor of 10 leads to a micron resolution associated with a subpicosecond temporal resolution. Single shot interferograms with a fringe visibility better than 30% are routinely produced. As a test of the XUV interferometer, we measure a maximum electronic density of 3×10^20 cm^−3 1.1 ns after the creation of a plasma on aluminum target

Pathotypic diversity of Hyaloperonospora brassicae collected from Brassica oleracea

Downy mildew caused by Hyaloperonospora brassicae is an economically destructive disease of brassica crops in many growing regions throughout the world. Specialised pathogenicity of downy mildews from different Brassica species and closely related ornamental or wild relatives has been described from host range studies. Pathotypic variation amongst Hyaloperonospora brassicae isolates from Brassica oleracea has also been described; however, a standard set of B. oleracea lines that could enable reproducible classification of H. brassicae pathotypes was poorly developed. For this purpose, we examined the use of eight genetically refined host lines derived from our previous collaborative work on downy mildew resistance as a differential set to characterise pathotypes in the European population of H. brassicae. Interaction phenotypes for each combination of isolate and host line were assessed following drop inoculation of cotyledons and a spectrum of seven phenotypes was observed based on the level of sporulation on cotyledons and visible host responses. Two host lines were resistant or moderately resistant to the entire collection of isolates, and another was universally susceptible. Five lines showed differential responses to the H. brassicae isolates. A minimum of six pathotypes and five major effect resistance genes are proposed to explain all of the observed interaction phenotypes. The B. oleracea lines from this study can be useful for monitoring pathotype frequencies in H. brassicae populations in the same or other vegetable growing regions, and to assess the potential durability of disease control from different combinations of the predicted downy mildew resistance genes

Identification of a novel zinc metalloprotease through a global analysis of clostridium difficile extracellular proteins

Clostridium difficile is a major cause of infectious diarrhea worldwide. Although the cell surface proteins are recognized to be important in clostridial pathogenesis, biological functions of only a few are known. Also, apart from the toxins, proteins exported by C. difficile into the extracellular milieu have been poorly studied. In order to identify novel extracellular factors of C. difficile, we analyzed bacterial culture supernatants prepared from clinical isolates, 630 and R20291, using liquid chromatography-tandem mass spectrometry. The majority of the proteins identified were non-canonical extracellular proteins. These could be largely classified into proteins associated to the cell wall (including CWPs and extracellular hydrolases), transporters and flagellar proteins. Seven unknown hypothetical proteins were also identified. One of these proteins, CD630_28300, shared sequence similarity with the anthrax lethal factor, a known zinc metallopeptidase. We demonstrated that CD630_28300 (named Zmp1) binds zinc and is able to cleave fibronectin and fibrinogen in vitro in a zinc-dependent manner. Using site-directed mutagenesis, we identified residues important in zinc binding and enzymatic activity. Furthermore, we demonstrated that Zmp1 destabilizes the fibronectin network produced by human fibroblasts. Thus, by analyzing the exoproteome of C. difficile, we identified a novel extracellular metalloprotease that may be important in key steps of clostridial pathogenesis

Non-adiabatic cluster expansion after ultrashort laser interaction

AbstractWe used X-ray spectroscopy as a diagnostic tool for investigating the properties of laser-cluster interactions at the stage in which non-adiabatic cluster expansion takes place and a quasi-homogeneous plasma is produced. The experiment was carried out with a 10 TW, 65 fs Ti:Sa laser focused on CO2 cluster jets. The effect of different laser-pulse contrast ratios and cluster concentrations was investigated. The X-ray emission associated to the Rydberg transitions allowed us to retrieve, through the density and temperature of the emitting plasma, the time after the beginning of the interaction at which the emission occurred. The comparison of this value with the estimated time for the "homogeneous" plasma formation shows that the degree of adiabaticity depends on both the cluster concentration and the pulse contrast. Interferometric measurements support the X-ray data concerning the plasma electron density