Effects of very high turbulence on convective heat transfer

The effects of high-intensity, large-scale turbulence on turbulent boundary-layer heat transfer are studied. Flow fields were produced with turbulence intensities up to 40% and length scales up to several times the boundary layer thickness. In addition, three different types of turbulence will be compared to see whether they have the same effect on the boundary layer. The three are: the far field of a free jet, flow downstream of a grid, and flow downstream of a simulated gas turbine combustor. Each turbulence field will be characterized by several measures: intensity (by component), scale, and spectrum. Heat transfer will be measured on a 2.5 m long, 0.5 m wide flat plate using the energy-balance technique. The same plate will be used in each of the four flow fields; a low-turbulence tunnel for baseline data, and the three flow situations mentioned

A sociological analysis of engineering education

Autoethnography is a social science method that could be described as a combination of ethnography and autobiography, telling stories that connect the personal to the cultural. My personal story is that of a teenager without the prerequisite 'maths and science' profile required for an engineering degree, who left school with no plans for a career in engineering. However, a later series of events led me to into an engineering career through the 'back door', and an engineering degree as a mature student. As someone who worked in industry first and did the degree later, I found that the very quantitative, objective and theoretical world of engineering education, didn’t seem to fit with the qualitative, subjective and applied reality. These were some of the reflections captured in my autoethnography, and exploring engineering education, through the lens of educational sociology, has led me to question the contrast between the skills required for engineering practice, and the skills required to complete an engineering degree. In order to explore why this situation exists I concluded my project with a Bourdieusian sociological analysis, conceptualising engineering academia and practice as Bourdieusian fields, and exploring the habitus, or world view of the members of those fields, and how this informs engineering education. In this paper I will briefly introduce the relevant social science terminology and literature, before using this framework to describe how these concepts may inform the way that the engineering curriculum is conceived. I argue that we need to look to the past, the present, and the future, and reconsider what we think engineering is, in order to design a curriculum that will meet the future needs of industry

Heat transfer with very high free stream turbulence

Stanton numbers as much as 350 percent above the accepted correlations for flat plate turbulent boundary layer heat transfer have been found in experiments on a low velocity air flow with very high turbulence (up to 50 percent). These effects are far larger that have been previously reported and the data do not correlate as well in boundary layer coordinates (Stanton number and Reynolds number) as they do in simpler coordinates: h vs. X. The very high relative turbulence levels were achieved by placing the test plate in different positions in the margin of a large diameter free jet. The large increases may be due to organized structures of large scale which are present in the marginal flowfield around a free jet

The C291R Tau variant forms different types of protofibrils

Mutations in the MAPT gene can lead to disease-associated variants of tau. However, the pathological mechanisms behind these genetic tauopathies are poorly understood. Here, we characterized the aggregation stages and conformational changes of tau C291R, a recently described MAPT mutation with potential pathogenic functions. The C291R variant of the tau four-repeat domain (tau-K18; a functional fragment with increased aggregation propensity compared with the full-length protein), aggregated into a mix of granular oligomers, amorphous and annular pore-like aggregates, in native-state and heparin-treated reactions as observed using atomic force microscopy (AFM) and negative-stained electron microscopy. On extended incubation in the native-state, tau-K18 C291R oligomers, unlike wild type (WT) tau-K18, aggregated to form protofibrils of four different phenotypes: (1) spherical annular; (2) spherical annular encapsulating granular oligomers; (3) ring-like annular but non-spherical; and (4) linear protofibrils. The ring-like tau-K18 C291R aggregates shared key properties of annular protofibrils previously described for other amyloidogenic proteins, in addition to two unique features: irregular/non-spherical-shaped annular protofibrils, and spherical protofibrils encapsulating granular oligomers. Tau-K18 C291R monomers had a circular dichroism (CD) peak at ~210 nm compared with ~199 nm for tau-K18 WT. These data suggest mutation-enhanced β-sheet propensity. Together, we describe the characterization of tau-K18 C291R, the first genetic mutation substituting a cysteine residue. The aggregation mechanism of tau-K18 C291R appears to involve β-sheet-rich granular oligomers which rearrange to form unique protofibrillar structures

Gravitational Waves in the Nonsymmetric Gravitational Theory

We prove that the flux of gravitational radiation from an isolated source in the Nonsymmetric Gravitational Theory is identical to that found in Einstein's General Theory of Relativity.Comment: 10 Page

Thermodynamic ground states of platinum metal nitrides

The thermodynamic stabilities of various phases of the nitrides of the platinum metal elements are systematically studied using density functional theory. It is shown that for the nitrides of Rh, Pd, Ir and Pt two new crystal structures, in which the metal ions occupy simple tetragonal lattice sites, have lower formation enthalpies at ambient conditions than any previously proposed structures. The region of stability with respect to those structures extends to 17 GPa for PtN2. Calculations show that the PtN2 simple tetragonal structures at this pressure are thermodynamically stable also with respect to phase separation. The fact that the local density and generalized gradient approximations predict different values of the absolute formation enthalpies as well different relative stabilities between simple tetragonal and the pyrite or marcasite structures are further discussed.Comment: 5 pages, 4 figure

Deposit Growth in the Wetting of an Angular Region with Uniform Evaporation

Solvent loss due to evaporation in a drying drop can drive capillary flows and solute migration. The flow is controlled by the evaporation profile and the geometry of the drop. We predict the flow and solute migration near a sharp corner of the perimeter under the conditions of uniform evaporation. This extends the study of Ref. 6, which considered a singular evaporation profile, characteristic of a dry surrounding surface. We find the rate of the deposit growth along contact lines in early and intermediate time regimes. Compared to the dry-surface evaporation profile of Ref. 6, uniform evaporation yields more singular deposition in the early time regime, and nearly uniform deposition profile is obtained for a wide range of opening angles in the intermediate time regime. Uniform evaporation also shows a more pronounced contrast between acute opening angles and obtuse opening angles.Comment: 12 figures, submitted to Physical Review

Heat transfer with very high free-stream turbulence and streamwise vortices

Results are presented for two experimental programs related to augmentation of heat transfer by complex flow characteristics. In one program, high free stream turbulence (up to 63 percent) was shown to increase the Stanton number by more than a factor of 5, compared with the normally expected value based on x-Reynolds number. These experiments are being conducted in a free-jet facility, near the margins of the jet. To a limited extent, the mean velocity, turbulence intensity, and integral length scale can be separately varied. The results show that scale is a very important factor in determining the augmentation. Detailed studies of the turbulence structure are being carried out using an orthogonal triple hot-wire anemometer equipped with a fourth wire for measuring temperature. The v' component of turbulence appears to be distributed differently from u' or w'. In the second program, the velocity distributions and boundary layer thicknesses associated with a pair of counter-rotating, streamwise vortices were measured. There is a region of considerably thinned boundary layer between the two vortices when they are of approximately the same strength. If one vortex is much stronger than the other, the weaker vortex may be lifted off the surface and absorbed into the stronger

Film cooling on a convex wall: Heat transfer and hydrodynamic measurements for full and partial coverage

Turbine-blade cooling is an important issue for high-efficiency turbine engines, and discrete-hole injection is widely used as a cooling method. In the present study, detailed measurements were made of the heat transfer and hydrodynamics of a film-cooled flow on a convex wall, both for full and partial coverage. Two important parameters were altered: the blowing ratio, m, and the number of rows of injection holes. Three values of m were tested: m = 0.2, 0.4, and 0.6. In the blown region, m = 0.4 results in the lowest Stanton numbers of the three blowing ratios tested. This indicates that the value of m = 0.4 is near optimum on the convex wall from the point of view of cooling effect by injection. In the recovery region, Stanton numbers gradually approach the no injection values. Although the heat-transfer behavior during recovery from injection looks relatively complicated, the behavior of Stanton number can be explained in terms of two mechanisms: recovery from the thermal effect of injection and recovery from the turbulence augmentation. This interpretation of the data is supported by the hydrodynamic and temperture-profile measurements. For partial blowing cases, the data follow the full-coverage values inside the blown region. In the unblown region, both in the curved and in the flat plate, the effect of the number of blown rows is clearly seen. Hydrodynamic boundary-layer profiles were measured with the aid of a triple hot-water probe. Three mean-velocity components and six turbulence quantities were simultaneously measured, and inside the blown region strong three-dimensionality was observed