1,069 research outputs found
TankSIM: A Cryogenic Tank Performance Prediction Program
Accurate prediction of the thermodynamic state of the cryogenic propellants in launch vehicle tanks is necessary for mission planning and successful execution. Cryogenic propellant storage and transfer in space environments requires that tank pressure be controlled. The pressure rise rate is determined by the complex interaction of external heat leak, fluid temperature stratification, and interfacial heat and mass transfer. If the required storage duration of a space mission is longer than the period in which the tank pressure reaches its allowable maximum, an appropriate pressure control method must be applied. Therefore, predictions of the pressurization rate and performance of pressure control techniques in cryogenic tanks are required for development of cryogenic fluid long-duration storage technology and planning of future space exploration missions. This paper describes an analytical tool, Tank System Integrated Model (TankSIM), which can be used for modeling pressure control and predicting the behavior of cryogenic propellant for long-term storage for future space missions. It is written in the FORTRAN 90 language and can be compiled with any Visual FORTRAN compiler. A thermodynamic vent system (TVS) is used to achieve tank pressure control. Utilizing TankSIM, the following processes can be modeled: tank self-pressurization, boiloff, ullage venting, and mixing. Details of the TankSIM program and comparisons of its predictions with test data for liquid hydrogen and liquid methane will be presented in the final paper
Tank System Integrated Model: A Cryogenic Tank Performance Prediction Program
Accurate predictions of the thermodynamic state of the cryogenic propellants, pressurization rate, and performance of pressure control techniques in cryogenic tanks are required for development of cryogenic fluid long-duration storage technology and planning for future space exploration missions. This Technical Memorandum (TM) presents the analytical tool, Tank System Integrated Model (TankSIM), which can be used for modeling pressure control and predicting the behavior of cryogenic propellant for long-term storage for future space missions. Utilizing TankSIM, the following processes can be modeled: tank self-pressurization, boiloff, ullage venting, mixing, and condensation on the tank wall. This TM also includes comparisons of TankSIM program predictions with the test data andexamples of multiphase mission calculations
"Last-Mile" preparation for a potential disaster
Extreme natural events, like e.g. tsunamis or earthquakes, regularly lead to catastrophes with dramatic consequences. In recent years natural disasters caused hundreds of thousands of deaths, destruction of infrastructure, disruption of economic activity and loss of billions of dollars worth of property and thus revealed considerable deficits hindering their effective management: Needs for stakeholders, decision-makers as well as for persons concerned include systematic risk identification and evaluation, a way to assess countermeasures, awareness raising and decision support systems to be employed before, during and after crisis situations. The overall goal of this study focuses on interdisciplinary integration of various scientific disciplines to contribute to a tsunami early warning information system. In comparison to most studies our focus is on high-end geometric and thematic analysis to meet the requirements of small-scale, heterogeneous and complex coastal urban systems. Data, methods and results from engineering, remote sensing and social sciences are interlinked and provide comprehensive information for disaster risk assessment, management and reduction. In detail, we combine inundation modeling, urban morphology analysis, population assessment, socio-economic analysis of the population and evacuation modeling. The interdisciplinary results eventually lead to recommendations for mitigation strategies in the fields of spatial planning or coping capacity
"Last-Mile" preparation for a potential disaster - Interdisciplinary approach towards tsunami early warning and an evacuation information system for the coastal city of Padang, Indonesia
Extreme natural events, like e.g. tsunamis or earthquakes, regularly lead to catastrophes with dramatic consequences. In recent years natural disasters caused hundreds of thousands of deaths, destruction of infrastructure, disruption of economic activity and loss of billions of dollars worth of property and thus revealed considerable deficits hindering their effective management: Needs for stakeholders, decision-makers as well as for persons concerned include systematic risk identification and evaluation, a way to assess countermeasures, awareness raising and decision support systems to be employed before, during and after crisis situations. The overall goal of this study focuses on interdisciplinary integration of various scientific disciplines to contribute to a tsunami early warning information system. In comparison to most studies our focus is on high-end geometric and thematic analysis to meet the requirements of smallscale, heterogeneous and complex coastal urban systems. Data, methods and results from engineering, remote sensing and social sciences are interlinked and provide comprehensive information for disaster risk assessment, management and reduction. In detail, we combine inundation modeling, urban morphology analysis, population assessment, socioeconomic analysis of the population and evacuation modeling. The interdisciplinary results eventually lead to recommendations for mitigation strategies in the fields of spatial planning or coping capacity.DFG/03G0666A-
TankSIM: A Cryogenic Tank Performance Prediction Program
Developed for predicting the behavior of cryogenic liquids inside propellant tanks under various environmental and operating conditions. Provides a multi-node analysis of pressurization, ullage venting and thermodynamic venting systems (TVS) pressure control using axial jet or spray bar TVS. Allows user to combine several different phases for predicting the liquid behavior for the entire flight mission timeline or part of it. Is a NASA in-house code, based on FORTRAN 90-95 and Intel Visual FORTRAN compiler, but can be used on any other platform (Unix-Linux, Compaq Visual FORTRAN, etc.). The last Version 7, released on December 2014, included detailed User's Manual. Includes the use of several RefPROP subroutines for calculating fluid properties
Exploring psychological need satisfaction from gambling participation and the moderating influence of game preferences
Psychological needs are satisfied through leisure participation, which in turn influences subjective well-being. The present study explored the psychological needs reported to be satisfied through gambling participation and examined associations between need satisfaction, game preferences and subjective well-being. A heterogeneous, self-selected sample of 1446 participants was recruited, through the Internet gambling provider Kindred Group Plc, for an online questionnaire survey. Five psychological need dimensions of gambling were identified, using exploratory and confirmatory factor analyses on calibration and validation samples, respectively: mastery, detachment, self-affirmation, risk and excitement, and affiliation. Challenge and mastery need satisfaction was higher for poker than for sports betting, horse racing, slots or casino table games; both self-affirmation and affiliation were also higher for poker than for sports betting and slots. By comparison, detachment was higher for slots than for sports gambling. While there were no significant variations in stress levels between the different forms of gambling, happiness ratings were lower for slots compared with sports betting and poker. This study provides insight into how distinctive patterns of play may satisfy different psychological needs and provides preliminary insights into how gambling patterns may prove adaptive or maladaptive as leisure choices
Map of synthetic rescue interactions for the Fanconi anemia DNA repair pathway identifies USP48
Genome Instability and Cance
Nutritional, Health, and Technological Functionality of Lupin Flour Addition to Bread and Other Baked Products: Benefits and Challenges
Lupin is an undervalued legume despite its high protein and dietary fiber content and potential health benefits. This review focuses on the nutritional value, health benefits, and technological effects of incorporating lupin flour into wheat-based bread. Results of clinical studies suggest that consuming lupin compared to wheat bread and other baked products reduce chronic disease risk markers; possibly due to increased protein and dietary fiber and bioactive compounds. However, lupin protein allergy has also been recorded. Bread quality has been improved when 10% lupin flour is substituted for refined wheat flour; possibly due to lupin-wheat protein cross-linking assisting bread volume and the high water-binding capacity (WBC) of lupin fiber delaying staling. Above 10% substitution appears to reduce bread quality due to lupin proteins low elasticity and the high WBC of its dietary fiber interrupting gluten network development. Gaps in understanding of the role of lupin flour in bread quality include the optimal formulation and processing conditions to maximize lupin incorporation, role of protein cross-linking, antistaling functionality, and bioactivity of its Îł-conglutin protein
Roflumilast in moderate-to-severe chronic obstructive pulmonary disease treated with longacting bronchodilators: two randomised clinical trials
Background Patients with chronic obstructive pulmonary disease (COPD) have few options for treatment. The efficacy and safety of the phosphodiesterase-4 inhibitor roflumilast have been investigated in studies of patients with moderate-to-severe COPD, but not in those concomitantly treated with longacting inhaled bronchodilators. The effect of roflumilast on lung function in patients with COPD that is moderate to severe who are already being treated with salmeterol or tiotropium was investigated. Methods In two double-blind, multicentre studies done in an outpatient setting, after a 4-week run-in, patients older than 40 years with moderate-to-severe COPD were randomly assigned to oral roflumilast 500 mu g or placebo once a day for 24 weeks, in addition to salmeterol (M2-127 study) or tiotropium (M2-128 study). The primary endpoint was change in prebronchodilator forced expiratory volume in 1s (FEV(1)). Analysis was by intention to treat. The studies are registered with ClinicalTrials.gov, number NCT00313209 for M2-127, and NCT00424268 for M2-128. Findings In the salmeterol plus roflumilast trial, 466 patients were assigned to and treated with roflumilast and 467 with placebo; in the tiotropium plus roflumilast trial, 371 patients were assigned to and treated with roflumilast and 372 with placebo. Compared with placebo, roflumilast consistently improved mean prebronchodilator FEV(1) by 49 mL (p<0.0001) in patients treated with salmeterol, and 80 mL (p<0.0001) in those treated with tiotropium. Similar improvement in postbronchodilator FEV(1) was noted in both groups. Furthermore, roflumilast had beneficial effects on other lung function measurements and on selected patient-reported outcomes in both groups. Nausea, diarrhoea, weight loss, and, to a lesser extent, headache were more frequent in patients in the roflumilast groups. These adverse events were associated with increased patient withdrawal. Interpretation Roflumilast improves lung function in patients with COPD treated with salmeterol or tiotropium, and could become an important treatment for these patients
QT dispersion in patients with systemic lupus erythematosus: the impact of disease activity
<p>Abstract</p> <p>Background</p> <p>Patients with systemic lupus erythematosus (SLE) have increased cardiovascular morbidity and mortality. Although autopsy studies have documented that the heart is affected in most SLE patients, clinical manifestations occur in less than 10%. QT dispersion is a new parameter that can be used to assess homogeneity of cardiac repolarization and autonomic function. We compared the increase in QT dispersion in SLE patients with high disease activity and mild or moderate disease activity.</p> <p>Methods and Results</p> <p>One hundred twenty-four patients with SLE were enrolled in the study. Complete history and physical exam, ECG, echocardiography, exercise test and SLE disease activity index (SLEDAI) were recorded. Twenty patients were excluded on the basis of our exclusion criteria. The patients were divided to two groups based on SLEDAI: 54 in the high-score group (SLEDAI > 10) and 50 in the low-score group (SLEDAI < 10).</p> <p>QT dispersion was significantly higher in high-score group (58.31 ± 18.66 vs. 47.90 ± 17.41 respectively; <it>P </it>< 0.004). QT dispersion was not significantly higher in patients who had received hydroxychloroquine (54.17 ± 19.36 vs. 50.82 ± 15.96, <it>P </it>= 0.45) or corticosteroids (53.58 ± 19.16 vs. 50.40 + 11.59, <it>P </it>= 0.47). There was a statistically significant correlation between abnormal echocardiographic findings (abnormalities of pericardial effusion, pericarditis, pulmonary hypertension and Libman-Sacks endocarditis) and SLEADI (<it>P </it>< 0.004).</p> <p>Conclusions</p> <p>QT dispersion can be a useful, simple noninvasive method for the early detection of cardiac involvement in SLE patients with active disease. Concerning high chance of cardiac involvement, cardiovascular evaluation for every SLE patient with a SLEDAI higher than 10 may be recommended.</p> <p>Trial registration</p> <p>Clinicaltrial.gov registration <a href="http://www.clinicaltrials.gov/ct2/show/NCT01031797">NCT01031797</a></p
- âŠ