1,814 research outputs found
A NASTRAN model of a large flexible swing-wing bomber. Volume 3: NASTRAN model development-wing structure
The NASTRAN model plan for the wing structure was expanded in detail to generate the NASTRAN model for this substructure. The grid point coordinates were coded for each element. The material properties and sizing data for each element were specified. The wing substructure model was thoroughly checked out for continuity, connectivity, and constraints. This substructure was processed for structural influence coefficients (SIC) point loadings and the deflections were compared to those computed for the aircraft detail model. Finally, a demonstration and validation processing of this substructure was accomplished using the NASTRAN finite element program. The bulk data deck, stiffness matrices, and SIC output data were delivered
A NASTRAN model of a large flexible swing-wing bomber. Volume 5: NASTRAN model development-fairing structure
The NASTRAN model plan for the fairing structure was expanded in detail to generate the NASTRAN model of this substructure. The grid point coordinates, element definitions, material properties, and sizing data for each element were specified. The fairing model was thoroughly checked out for continuity, connectivity, and constraints. The substructure was processed for structural influence coefficients (SIC) point loadings to determine the deflection characteristics of the fairing model. Finally, a demonstration and validation processing of this substructure was accomplished using the NASTRAN finite element program. The bulk data deck, stiffness matrices, and SIC output data were delivered
A NASTRAN Model of a Large Flexible Swing-Wing Bomber. Volume 1: NASTRAN Model Plane
A review was conducted of B-1 aircraft no. 2 (A/C-2) internal loads models to determine the minimum model complexity necessary to fulfill all of the airloads research study objectives. Typical model sizings were tabulated at selected vehicle locations, and scale layouts were prepared of the NASTRAN structural analysis model
A gradient index metamaterial
Metamaterials--artificially structured materials with tailored
electromagnetic response--can be designed to have properties difficult to
achieve with existing materials. Here we present a structured metamaterial,
based on conducting split ring resonators (SRRs), which has an effective
index-of-refraction with a constant spatial gradient. We experimentally confirm
the gradient by measuring the deflection of a microwave beam by a planar slab
of the composite metamaterial over a broad range of frequencies. The gradient
index metamaterial represents an alternative approach to the development of
gradient index lenses and similar optics that may be advantageous, especially
at higher frequencies. In particular, the gradient index material we propose
may be suited for terahertz applications, where the magnetic resonant response
of SRRs has recently been demonstrated
Role of material properties and mesostructure on dynamic deformation and shear instability in Al-W granular composites
Dynamic experiments with Al-W granular/porous composites revealed
qualitatively different behavior with respect to shear localization depending
on bonding between Al particles. Two-dimensional numerical modeling was used to
explore the mesomechanics of the large strain dynamic deformation in Al-W
granular/porous composites and explain the experimentally observed differences
in shear localization between composites with various mesostructures.
Specifically, the bonding between the Al particles, the porosity, the roles of
the relative particle sizes of Al and W, the arrangements of the W particles,
and the material properties of Al were investigated using numerical
calculations. It was demonstrated in simulations that the bonding between the
"soft" Al particles facilitated shear localization as seen in the experiments.
Numerical calculations and experiments revealed that the mechanism of the shear
localization in granular composites is mainly due to the local high strain flow
of "soft" Al around the "rigid" W particles causing localized damage
accumulation and subsequent growth of the meso/macro shear bands/cracks. The
"rigid" W particles were the major geometrical factor determining the
initiation and propagation of "kinked" shear bands in the matrix of "soft" Al
particles, leaving some areas free of extensive plastic deformation as observed
in experiments and numerical calculations.Comment: 10 pages, 14 figures, submitted to Journal of Applied Physic
Improving Surgical Care in Low- and Middle-Income Countries: A Pivotal Role for the World Health Organization
In response to increasing evidence that surgical conditions are an important global public health problem, and data suggesting that essential surgical services can be delivered in a cost-effective manner in low- and middle-income countries, the World Health Organization (WHO) has expanded its interest in surgical care. In 2004, WHO established a Clinical Procedures Unit within the Department of Essential Health Technologies. This unit has developed the Emergency and Essential Surgical Project (EESC), which includes a basic surgical training program based on the “Integrated Management of Emergency and Essential Surgical Care” Toolkit and the textbook “Surgery at the District Hospital.” To promote the importance of emergency and essential surgical care, a Global Initiative for Emergency and Essential Care was launched in 2005. In what maybe the most important development, surgical care is included in WHO’s new comprehensive primary health care plan. Given these rapid developments, surgical care at WHO may be approaching a critical “tipping point.” Lobbying for a World Health Assembly resolution on emergency and essential surgical care, and developing “structured collaborations” between WHO and various stakeholders are potential ways to ensure that the global surgery agenda continues to move forward
A Perfect Metamaterial Absorber
We present the design for an absorbing metamaterial element with near unity
absorbance. Our structure consists of two metamaterial resonators that couple
separately to electric and magnetic fields so as to absorb all incident
radiation within a single unit cell layer. We fabricate, characterize, and
analyze a metamaterial absorber with a slightly lower predicted absorbance of
96%. This achieves a simulated full width at half maximum (FWHM) absorbance of
4% thus making this material ideal for imaging purposes. Unlike conventional
absorbers, our metamaterial consists solely of metallic elements. The
underlying substrate can therefore be chosen independently of the substrate's
absorptive qualities and optimized for other parameters of interest. We detail
the design and simulation process that led to our metamaterial, and our
experiments demonstrate a peak absorbance greater than 88% at 11.5 GHz
‘O sibling, where art thou?’ – a review of avian sibling recognition with respect to the mammalian literature
Avian literature on sibling recognition is rare compared to that developed by mammalian researchers. We compare avian and mammalian research on sibling recognition to identify why avian work is rare, how approaches differ and what avian and mammalian researchers can learn from each other. Three factors: (1) biological differences between birds and mammals, (2) conceptual biases and (3) practical constraints, appear to influence our current understanding. Avian research focuses on colonial species because sibling recognition is considered adaptive where ‘mixing potential’ of dependent young is high; research on a wider range of species, breeding systems and ecological conditions is now needed. Studies of acoustic recognition cues dominate avian literature; other types of cues (e.g. visual, olfactory) deserve further attention. The effect of gender on avian sibling recognition has yet to be investigated; mammalian work shows that gender can have important influences. Most importantly, many researchers assume that birds recognise siblings through ‘direct familiarisation’ (commonly known as associative learning or familiarity); future experiments should also incorporate tests for ‘indirect familiarisation’ (commonly known as phenotype matching). If direct familiarisation proves crucial, avian research should investigate how periods of separation influence sibling discrimination. Mammalian researchers typically interpret sibling recognition in broad functional terms (nepotism, optimal outbreeding); some avian researchers more successfully identify specific and testable adaptive explanations, with greater relevance to natural contexts. We end by reporting exciting discoveries from recent studies of avian sibling recognition that inspire further interest in this topic
- …