42 research outputs found
Toward Real Setting Applications of Organic and Perovskite Solar Cells: A Comparative Review
The development of efficient, reliable, and clean energy sources is one of the global priorities for enabling a sustainable transition toward a green society and economy. The third‐generation solar cells, such as organic solar cells (OSCs) and perovskite solar cells (PSCs), are among the most promising platforms for the generation of electrical power from sunlight for a wide range of applications. However, the widespread diffusion of emerging photovoltaics technologies is hampered by issues occurring in the translation of laboratory‐scale R&D efforts to real settings. Herein, starting from a thorough survey of latest research on OSC and PSC technologies, critical factors related to fabrication and operation of solar cells, especially in terms of materials properties/requirements and beyond metrics built on efficiency only, are analyzed. On this basis, OSCs and PSCs are compared in terms of their potential in real application scenarios, also highlighting their peculiarities in view of their future large‐scale utilization
Recurrence and higher ergodic properties for quenched random Lorentz tubes in dimension bigger than two
We consider the billiard dynamics in a non-compact set of R^d that is
constructed as a bi-infinite chain of translated copies of the same
d-dimensional polytope. A random configuration of semi-dispersing scatterers is
placed in each copy. The ensemble of dynamical systems thus defined, one for
each global realization of the scatterers, is called `quenched random Lorentz
tube'. Under some fairly general conditions, we prove that every system in the
ensemble is hyperbolic and almost every system is recurrent, ergodic, and
enjoys some higher chaotic properties.Comment: Final version for J. Stat. Phys., 18 pages, 4 figure
Resonances in the two-centers Coulomb system
We investigate the existence of resonances for two-centers Coulomb systems with arbitrary charges in two dimensions, defining them in terms of generalised complex eigenvalues of a non-selfadjoint deformation of the two-centers Schr\"odinger operator. We construct the resolvent kernels of the operators and prove that they can be extended analytically to the second Riemann sheet. The resonances are then analysed by means of perturbation theory and numerical methods
Drift-diffusion and analytical modeling of the recombination mechanisms in organic solar cells: Effect of the nonconstant charge distribution inside the active layer
Recent Development of Quinoxaline Based Polymers/Small Molecules for Organic Photovoltaics
Among the various molecular designs developed for the synthesis of conjugated polymers and small molecules for optoelectronic applications, the donor: acceptor (D-A) approach is the most widely explored method over the past decades. Through the covalent linkage of electron-rich and electron-deficient units, a plethora of medium-low band gap materials has been developed and tested in organic photovoltaic devices. In particular, the quinoxaline aromatic structure and its derivatives are among the most studied electron deficient aromatic units used in D-A structures. Quinoxaline based materials are endowed with characteristics that are useful for large scale production in real world applications, such as easy synthetic procedures and excellent stability in air. Moreover, the use of quinoxaline based polymers/small molecules in bulk heterojunction (BHJ) devices led to power conversion efficiencies over 9%. Considering the potential of quinoxaline based materials, this review gathers together quinoxaline based polymers and small molecules reported in the literature during the last 5 years, summarizing and discussing the structure-properties relationships for this class of organic semiconductors, aiming to serve as a background and to promote efforts for the further development of new quinoxaline derivatives with improved and advanced properties for future applications
A new quinoxaline and isoindigo based polymer as donor material for solar cells: Role of ecofriendly processing solvents on the device efficiency and stability
A new semiconducting polymer based on two different electron deficient (quinoxaline and isoindigo) and electron rich (benzodithiophene) moieties is synthesized, characterized and used as donor material for photovoltaic devices. Blade‐coated bulk heterojunction solar cells are fabricated in air by using chlorinated (o‐dichlorobenzene) and nonchlorinated (o‐xylene) solvents for the deposition of the active layer. The use of o‐xylene allows a ∼10% improvement of the device efficiency in comparison to the analogous system processed from o‐dichlorobenzene. In addition, the evolution of the photovoltaic parameters of the resulting devices during thermal stress is monitored and compared, demonstrating a nearly identical resistance against temperature. The reported results not only highlight the promising properties of the new polymer in terms of environmental stability and compatibility with nonhalogenated solvents, but also show an easy and ecofriendly way to further improve the device performance without altering the corresponding thermal stabilit
Impact of environmentally friendly processing on polymer solar cells: Performance, thermal stability and morphological study by imaging techniques
The combination of mass-production compatible coating techniques and environmentally friendly solvents to process bulk heterojunction solar cells represents a key issue to scale up this technology. In this work we demonstrate that using a benchmark polymer HBG-1 blended with PC61BM, the replacement of a common chlorinated processing solvent (orthodichlorobenzene) with a non-chlorinated analogous (o-xylene) not only allows the fabrication of blade-coated bulk heterojunction devices with identical photovoltaic performance, but also determines a great enhancement of the resulting thermal stability. Thermal degradation tests were carried out in inert atmosphere, by keeping the solar cells onto a hot plate at 85\ua0\ub0C and monitoring their OPV performance. In parallel, the morphological changes of the active layers induced by thermal stress are investigated by combining two complementary light-based imaging techniques, laser scanning confocal and photocurrent microscopy, which offer the great advantage to simultaneously study on complete devices the blend morphology and the electrical properties, point-by-point, of the active layer even in regions unlikely accessible (e.g. the active area under the top electrode) using other techniques. As a result, we found that solar cells processed from a non-chlorinated based solvent, in comparison to an analogous reference system, exhibit a different evolution of the resulting BHJ morphology during thermal ageing, in perfect agreement with the corresponding photovoltaic responses
Efficient as-cast bulk-heterojunction solar cells based on a tert-butyl substituted methanofullerene acceptor
We report on the implementation of a modified methanofullerene PCBtB ([6,6]-phenyl-C(61) butyric acid tert-butylester) as electron acceptor for solution-processable bulk-heterojunction (BHJ) solar cells based on P3HT (poly(3-hexylthiophene)). The results demonstrate how a small modification of the steric hindrance of the benchmark molecule PCBM, leaving the electronic structure unchanged, significantly influences the main properties of the BHJ active layer. In particular, we investigate the effect of the replacement of the PC(61)BM methyl end-group with a tert-butyl substituent on the optical properties, OPV parameters, nanoscale morphology, D: A phase segregation, and charge carrier mobility in bulk-heterojunction with P3HT. We find that the PCBtB-based blends present a finer self-organization, higher D: A phase segregation and good charge carrier mobility, affording interesting photovoltaic responses and highlighting a marked potential of PCBtB to tailor the active BHJ layer. The best BHJ solar cells based on as-cast P3HT: PCBtB blend films exhibit power conversion efficiencies (PCEs) of similar to 3.1%, under a simulated AM1.5G illumination of 100 mW cm(-2), which are greater than the analogous as-cast P3HT: PCBM based devices
Open circuit voltage decay as a tool to assess the reliability of organic solar cells: P3HT:PCBM vs. HBG1:PCBM
A New Quinoxaline and Isoindigo Based Polymer as Donor Material for Solar Cells: Role of Ecofriendly Processing Solvents on the Device Efficiency and Stability
A new semiconducting polymer based on two different electron deficient (quinoxaline and isoindigo) and electron rich (benzodithiophene) moieties is synthesized, characterized and used as donor material for photovoltaic devices. Blade-coated bulk heterojunction solar cells are fabricated in air by using chlorinated (o-dichlorobenzene) and nonchlorinated (o-xylene) solvents for the deposition of the active layer. The use of o-xylene allows a similar to 10% improvement of the device efficiency in comparison to the analogous system processed from o-dichlorobenzene. In addition, the evolution of the photovoltaic parameters of the resulting devices during thermal stress is monitored and compared, demonstrating a nearly identical resistance against temperature. The reported results not only highlight the promising properties of the new polymer in terms of environmental stability and compatibility with nonhalogenated solvents, but also show an easy and ecofriendly way to further improve the device performance without altering the corresponding thermal stability