1,917 research outputs found
Wrapper Maintenance: A Machine Learning Approach
The proliferation of online information sources has led to an increased use
of wrappers for extracting data from Web sources. While most of the previous
research has focused on quick and efficient generation of wrappers, the
development of tools for wrapper maintenance has received less attention. This
is an important research problem because Web sources often change in ways that
prevent the wrappers from extracting data correctly. We present an efficient
algorithm that learns structural information about data from positive examples
alone. We describe how this information can be used for two wrapper maintenance
applications: wrapper verification and reinduction. The wrapper verification
system detects when a wrapper is not extracting correct data, usually because
the Web source has changed its format. The reinduction algorithm automatically
recovers from changes in the Web source by identifying data on Web pages so
that a new wrapper may be generated for this source. To validate our approach,
we monitored 27 wrappers over a period of a year. The verification algorithm
correctly discovered 35 of the 37 wrapper changes, and made 16 mistakes,
resulting in precision of 0.73 and recall of 0.95. We validated the reinduction
algorithm on ten Web sources. We were able to successfully reinduce the
wrappers, obtaining precision and recall values of 0.90 and 0.80 on the data
extraction task
Photodissociation of Cl_2O at 248 and 308 nm
Molecular beam studies of Cl_2O photolysis at 248 and 308 nm have been repeated and the analysis refined. At 248 nm, three distinct dissociation pathways that led to Cl+ClO products were resolved. At 308 nm, the angular distribution was slightly more isotropic than previously reported, leaving open the possibility that Cl_2O excited at 308 nm lives longer than a rotational period
Hyperthermal neutral beam etching
A pulsed beam of hyperthermal fluorine atoms with an average translational energy of 4.8 eV has been used to demonstrate anisotropic etching of Si. For 1.4 Hz operation, a room-temperature etch rate of 300 Å/min for Si(100) has been measured at a distance of 30 cm from the source. A 14% undercutting for room-temperature etching of Novolac-masked Si features was achieved under single-collision conditions, with no detectable mask erosion. Translational energy and angular distributions of scattered fluorine atoms during steady-state etching of Si by a normal-incidence, collimated beam demonstrate that unreacted F atoms can scatter inelastically, retaining a significant fraction of their initial kinetic energies. The observed undercutting can be explained by secondary impingement of these high-energy F atoms, which are more reactive upon interaction with the sidewalls than would be expected if they desorbed from the surface at thermal energies after full accommodation. Time-of-flight distributions of volatile reaction products were also collected, and they show evidence for a dominant nonthermal reaction mechanism of the incident atoms with the surface in addition to a thermal reaction channel
Design of an instrumented smart cutting tool and its implementation and application perspectives
This paper presents an innovative design of a smart cutting tool, using two surface acoustic wave (SAW) strain sensors mounted onto the top and the side surface of the tool shank respectively, and its implementation and application perspectives. This surface acoustic wave-based smart cutting tool is capable of measuring the cutting force and the feed force in a real machining environment, after a calibration process under known cutting conditions. A hybrid dissimilar workpiece is then machined using the SAW-based smart cutting tool. The hybrid dissimilar material is made of two different materials, NiCu alloy (Monel) and steel, welded together to form a single bar; this can be used to simulate an abrupt change in material properties. The property transition zone is successfully detected by the tool; the sensor feedback can then be used to initiate a change in the machining parameters to compensate for the altered material properties.The UK Technology Strategy Board (TSB) for supporting this research (SEEM Project, contract No. BD266E
Dissociation Dynamics of CIONO_2 and Relative Cl and ClO Product Yields following Photoexcitation at 308 nm
Chlorine nitrate photolysis at 308 nm has been investigated with a molecular beam technique. Two primary decomposition pathways, leading to Cl + NO_3 and ClO + NO_2, were observed. The branching ratio between these two respective channels was determined to be 0.67 ± 0.06 : 0.33 ± 0.06. This ratio is an upper limit because some of the ClO photoproducts may have undergone secondary photodissociation. The angular distributions of the photoproducts with respect to the direction of polarization of the exciting light were anisotropic. The anisotropy parameters were β= 0.5 ± 0.2 for the Cl + NO_3 channel and β= 1.1 ± 0.2 for the ClO + NO_2 channel, indicating that dissociation of ClONO_2 by either pathway occurs within a rotational period. Weak signal at mass-to-charge ratios of 35 and 51, arising from products with laboratory velocities close to the beam velocity, was observed. While this signal could result from statistical dissociation channels with a total relative yield of 0.07 or less, it is more likely attributable to products from ClO secondary photodissociation or from dissociation of clusters
Primary and secondary dissociation pathways in the ultraviolet photolysis of Cl_2O
The photodissociation of dichlorine monoxide (Cl_2O) at 308, 248, and 193 nm was studied by photofragment translational energy spectroscopy. The primary channel upon excitation at 308 and 248 nm was Cl–O bond fission with production of ClO+Cl. A fraction of the ClO photoproducts also underwent spontaneous secondary dissociation at 248 nm. The center-of-mass translational energy distribution for the ClO+Cl channel at 248 nm appeared to be bimodal with a high energy component that was similar in shape to the 308 nm distribution and a second, low energy component with a maximum close to the threshold for the 2Cl+O(3P) channel. Observation of a bimodal distribution suggests that two pathways with different dissociation dynamics lead to ClO+Cl products. The high product internal energy of the second component raises the possibility that ClO is formed in a previously unobserved spin-excited state a 4∑−. Following excitation at 193 nm, a concerted dissociation pathway leading to Cl_2+O was observed in addition to primary Cl–O bond breakage. In both processes, most of the diatomic photofragments were formed with sufficient internal energy that they spontaneously dissociated. The time-of-flight distributions of the Cl_2+O products suggest that these fragments are formed in two different channels Cl_2(3II)+O(3P) and Cl_2(X1∑)+O(1D)
Secretion and assembly of functional mini-cellulosomes from synthetic chromosomal operons in Clostridium acetobutylicum ATCC 824.
Background: Consolidated bioprocessing (CBP) is reliant on the simultaneous enzyme production, saccharification of biomass, and fermentation of released sugars into valuable products such as butanol. Clostridial species that produce butanol are, however, unable to grow on crystalline cellulose. In contrast, those saccharolytic species that produce predominantly ethanol, such as Clostridium thermocellum and Clostridium cellulolyticum, degrade crystalline cellulose with high efficiency due to their possession of a multienzyme complex termed the cellulosome. This has led to studies directed at endowing butanol-producing species with the genetic potential to produce a cellulosome, albeit by localising the necessary transgenes to unstable autonomous plasmids. Here we have explored the potential of our previously described Allele-Coupled Exchange (ACE) technology for creating strains of the butanol producing species Clostridium acetobutylicum in which the genes encoding the various cellulosome components are stably integrated into the genome. Results: We used BioBrick2 (BB2) standardised parts to assemble a range of synthetic genes encoding C. thermocellum cellulosomal scaffoldin proteins (CipA variants) and glycoside hydrolases (GHs, Cel8A, Cel9B, Cel48S and Cel9K) as well as synthetic cellulosomal operons that direct the synthesis of Cel8A, Cel9B and a truncated form of CipA. All synthetic genes and operons were integrated into the C. acetobutylicum genome using the recently developed ACE technology. Heterologous protein expression levels and mini-cellulosome self-assembly were assayed by western blot and native PAGE analysis. Conclusions: We demonstrate the successful expression, secretion and self-assembly of cellulosomal subunits by the recombinant C. acetobutylicum strains, providing a platform for the construction of novel cellulosomes. © 2013 Kovács et al.; licensee BioMed Central Ltd
Protocol for Atomic Oxygen Testing of Materials in Ground-Based Facilities
A second version of standard guidelines is proposed for improving materials testing in ground-based atomic oxygen environments for the purpose of predicting the durability of the tested materials in low Earth orbit (LEO). Accompanying these guidelines are background information and notes about testing. Both the guidelines and the additional information are intended to aid users who wish to evaluate the potential hazard of atomic oxygen in LEO to a candidate space component without actually flying the component in space, and to provide a framework for more consistent atomic oxygen testing in the future
Integration of DNA into bacterial chromosomes from plasmids without a counter-selection marker.
Most bacteria can only be transformed with circular plasmids, so robust DNA integration methods for these rely upon selection of single-crossover clones followed by counter-selection of double-crossover clones. To overcome the limited availability of heterologous counter-selection markers, here we explore novel DNA integration strategies that do not employ them, and instead exploit (i) activation or inactivation of genes leading to a selectable phenotype, and (ii) asymmetrical regions of homology to control the order of recombination events. We focus here on the industrial biofuel-producing bacterium Clostridium acetobutylicum, which previously lacked robust integration tools, but the approach we have developed is broadly applicable. Large sequences can be delivered in a series of steps, as we demonstrate by inserting the chromosome of phage lambda (minus a region apparently unstable in Escherichia coli in our cloning context) into the chromosome of C. acetobutylicum in three steps. This work should open the way to reliable integration of DNA including large synthetic constructs in diverse microorganisms. © 2011 The Author(s)
Semiconductor etching by hyperthermal neutral beams
An at-least dual chamber apparatus and method in which high flux beams of fast moving neutral reactive species are created, collimated and used to etch semiconductor or metal materials from the surface of a workpiece. Beams including halogen atoms are preferably used to achieve anisotropic etching with good selectivity at satisfactory etch rates. Surface damage and undercutting are minimized
- …