269 research outputs found
In situ nanoindentation in a transmission electron microscope
This dissertation presents the development of the novel mechanical testing technique of in situ nanoindentation in a transmission electron microscope (TEM). This technique makes it possible to simultaneously observe and quantify the mechanical behavior of nano-scale volumes of solids
Recommended from our members
Selective Lanthanide Sensing with Gold Nanoparticles and Hydroxypyridinone Chelators.
The octadentate hydroxypyridinone chelator 3,4,3-LI(1,2-HOPO) is a promising therapeutic agent because of its high affinity for f-block elements and noncytotoxicity at medical dosages. The interaction between 3,4,3-LI(1,2-HOPO) and other biomedically relevant metals such as gold, however, has not been explored. Gold nanoparticles functionalized with chelators have demonstrated great potential in theranostics, yet thus far, no protocol that combines 3,4,3-LI(1,2-HOPO) and colloidal gold has been developed. Here, we characterize the solution thermodynamic properties of the complexes formed between 3,4,3-LI(1,2-HOPO) and Au3+ ions and demonstrate how under specific pH conditions the chelator promotes the growth of gold nanoparticles, acting as both reducing and stabilizing agent. 3,4,3-LI(1,2-HOPO) ligands on the nanoparticle surface remain active and selective toward f-block elements, as evidenced by gold nanoparticle selective aggregation. Finally, a new colorimetric assay capable of reaching the detection levels necessary for the quantification of lanthanides in waste from industrial processes is developed based on the inhibition of particle growth by lanthanides
Patterned probes for high precision 4D-STEM bragg measurements.
Nanoscale strain mapping by four-dimensional scanning transmission electron microscopy (4D-STEM) relies on determining the precise locations of Bragg-scattered electrons in a sequence of diffraction patterns, a task which is complicated by dynamical scattering, inelastic scattering, and shot noise. These features hinder accurate automated computational detection and position measurement of the diffracted disks, limiting the precision of measurements of local deformation. Here, we investigate the use of patterned probes to improve the precision of strain mapping. We imprint a "bullseye" pattern onto the probe, by using a binary mask in the probe-forming aperture, to improve the robustness of the peak finding algorithm to intensity modulations inside the diffracted disks. We show that this imprinting leads to substantially improved strain-mapping precision at the expense of a slight decrease in spatial resolution. In experiments on an unstrained silicon reference sample, we observe an improvement in strain measurement precision from 2.7% of the reciprocal lattice vectors with standard probes to 0.3% using bullseye probes for a thin sample, and an improvement from 4.7% to 0.8% for a thick sample. We also use multislice simulations to explore how sample thickness and electron dose limit the attainable accuracy and precision for 4D-STEM strain measurements
Direct observation of nanocrystal-induced enhancement of tensile ductility in a metallic glass composite
Bulk metallic glasses (BMGs) have attracted wide interest, but their successful application is hindered by their low ductility at room temperature. Therefore, the use of composites of a BMG matrix with crystalline secondary phases has been proposed to overcome this drawback. In the present work we demonstrate the fabrication of a tailored BMG nanocomposite containing a high density of monodisperse nanocrystals with a size of around 20 nm using a combination of mechanical and thermal treatment of Cu36Zr48Al8Ag8 well below the crystallization temperature. Direct observations of the interaction of the nanocrystals with a shear band during in situ deformation in a transmission electron microscope demonstrate that the achieved nanocomposite has the potential to inhibit catastrophic fracture in tension. This demonstrates that a sufficient number of nanoscale structural heterogeneities can be a route towards BMG composites with superior mechanical properties
Accurate quantification of lattice temperature dynamics from ultrafast electron diffraction of single-crystal films using dynamical scattering simulations
In ultrafast electron diffraction (UED) experiments, accurate retrieval of
time-resolved structural parameters such as atomic coordinates and thermal
displacement parameters requires an accurate scattering model. Unfortunately,
kinematical models are often inaccurate even for relativistic electron probes,
especially for dense, oriented single crystals where strong channeling and
multiple scattering effects are present. This article introduces and
demonstrates dynamical scattering models tailored for quantitative analysis of
UED experiments performed on single-crystal films. As a case study, we examine
ultrafast laser heating of single-crystal gold films. Comparison of kinematical
and dynamical models reveals the strong effects of dynamical scattering within
nm-scale films and their dependence on sample topography and probe kinetic
energy. Applied to UED experiments on an 11 nm thick film using 750 keV
electron probe pulses, the dynamical models provide a tenfold improvement over
a comparable kinematical model in matching the measured UED patterns. Also, the
retrieved lattice temperature rise is in very good agreement with predictions
based on previously measured optical constants of gold, whereas fitting the
Debye-Waller factor retrieves values that are more than three times lower.
Altogether, these results show the importance of dynamical scattering theory
for quantitative analysis of UED, and demonstrate models that can be
practically applied to single-crystal materials and heterostructures.Comment: 12 pages, 7 figure
Multiple origins of extra electron diffractions in fcc metals
Diffuse intensities in the electron diffraction patterns of concentrated
face-centered cubic solid solutions have been widely attributed to chemical
short-range order, although this connection has been recently questioned. This
article explores the many non-ordering origins of commonly reported features
using a combination of experimental electron microscopy and multislice
diffraction simulations, which suggest that diffuse intensities largely
represent thermal and static displacement scattering. A limited number of
observations may reflect additional contributions from planar defects, surface
terminations incommensurate with bulk periodicity, or weaker dynamical effectsComment: 8 pages, 3 figure
Extra electron reflections in concentrated alloys may originate from planar defects, not short-range order
In many concentrated alloys of current interest, the observation of diffuse
superlattice intensities by transmission electron microscopy has been
attributed to the presence of chemical short-range order. This interpretation
is questioned on the basis of crystallographic considerations and theoretical
predictions of ordering. The work of Xiao and Daykin [Ultramicroscopy 53
(1994)], which shows how planar defects can produce the exact set of observed
peaks, is highlighted as an alternative explanation that would impact the
conclusions of a number of recent studies.Comment: 5 pages, 3 figure
Nanomechanical testing of freestanding polymer thin films
A new approach for tensile testing of freestanding polymer thin films has been developed to investigate nanomechanical phenomena with precise control of strain rate, environmental and in situ TEM imaging capabilities. Several techniques for mechanical testing of polymer thin films have been reported previously, but there is a lack of consensus regarding size-dependent mechanical properties1–3. The technique described here is derived from a nanomechanical tensile testing platform known as at Push-to-Pull (PTP) device (Figure 1) using a novel sample preparation approach. A free-standing specimen is placed across the tensile actuation gap of the PTP device such that it can be mounted at the end of a specialized TEM holder for quantitative in situ tensile testing or to a specialized mount was designed to enable PTP experiments to be performed using a stand-alone nanoindenter. With this adaptation, all of the capabilities of ex situ nanoindentation are accessible to PTP tensile testing; which includes environmental control (temperature and humidity), DMA, and a wide range of strain rates. Polystyrene was chosen as a model system for direct comparison with alternative testing techniques. While polystyrene is traditionally thought of as a brittle polymer at room temperature, our initial testing of thin sections has revealed extreme ductility (Figure 1). Ductility in polystyrene thin films has been previously reported in literature1–3, but only to elongations of less than 7% before fracture. Initial results using the PTP device have shown extreme ductility in polystyrene, with strains exceeding 100% without fracture. Our results appear to be independent of strain rate in the range tested; unlike the yield stress, which shows a strong strain-rate dependence. The origin of this nanomechanical pheno
Please click Additional Files below to see the full abstract
Recommended from our members
Direct imaging of short-range order and its impact on deformation in Ti-6Al.
Chemical short-range order (SRO) within a nominally single-phase solid solution is known to affect the mechanical properties of alloys. While SRO has been indirectly related to deformation, direct observation of the SRO domain structure, and its effects on deformation mechanisms at the nanoscale, has remained elusive. Here, we report the direct observation of SRO in relation to deformation using energy-filtered imaging in a transmission electron microscope (TEM). The diffraction contrast is enhanced by reducing the inelastically scattered electrons, revealing subnanometer SRO-enhanced domains. The destruction of these domains by dislocation planar slip is observed after ex situ and in situ TEM mechanical testing. These results confirm the impact of SRO in Ti-Al alloys on the scale of angstroms. The direct confirmation of SRO in relationship to dislocation plasticity in metals can provide insight into how the mechanical behavior of concentrated solid solutions by the material's thermal history
Nanoscale mosaicity revealed in peptide microcrystals by scanning electron nanodiffraction.
Changes in lattice structure across sub-regions of protein crystals are challenging to assess when relying on whole crystal measurements. Because of this difficulty, macromolecular structure determination from protein micro and nanocrystals requires assumptions of bulk crystallinity and domain block substructure. Here we map lattice structure across micron size areas of cryogenically preserved three-dimensional peptide crystals using a nano-focused electron beam. This approach produces diffraction from as few as 1500 molecules in a crystal, is sensitive to crystal thickness and three-dimensional lattice orientation. Real-space maps reconstructed from unsupervised classification of diffraction patterns across a crystal reveal regions of crystal order/disorder and three-dimensional lattice tilts on the sub-100nm scale. The nanoscale lattice reorientation observed in the micron-sized peptide crystal lattices studied here provides a direct view of their plasticity. Knowledge of these features facilitates an improved understanding of peptide assemblies that could aid in the determination of structures from nano- and microcrystals by single or serial crystal electron diffraction
- …